P0461 on Infiniti: How to Diagnose & Fix
Fuel Level Sensor 'A' Circuit Range/Performance
2 Infiniti models · 2 documented issues · $300-$900 repair
P0461 on Infiniti by model: symptoms, diagnosis and fix
A common Nissan/Infiniti issue on this era of FX35 is inaccurate fuel level readings caused by wear or contamination of the fuel level sending unit inside the tank. Owners report the gauge sticking, dropping suddenly, or showing empty with fuel still in the tank, sometimes accompanied by a check engine light.
Common Symptoms
- Fuel gauge reads empty when tank is not empty
- Gauge fluctuates unpredictably
- Low fuel warning comes on too early
- Distance-to-empty is inaccurate
- Check engine light with EVAP/fuel level correlation faults
How to Fix
Diagnosis involves comparing scan-tool fuel level data with actual tank fill amount and checking for sender-related codes. Repair typically requires replacing the affected fuel level sender or pump module assembly through the access panel under the rear seat/cargo area, depending on configuration. Typical cost is about $300-$800 using quality parts and new tank seal hardware.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
- Genuine Infiniti fuel-gauge sending unitOEMInfiniti 25060-CG00E
Confirm VIN, physical sender position and required seal because the tank contains more than one level-sensing
- Genuine Infiniti primary fuel-gauge sending unitOEMInfiniti 25060-1CB0C
Confirm VIN and the 25060Y diagram position; do not confuse it with the separate 25060YA/1CB1C level sensor.
- Genuine Infiniti secondary fuel-level sensorOEMInfiniti 25060-1CB1C
It is not listed for 2009 and is separate from 1CB0C; verify VIN, connecto
As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.
Owner tips & cautions
- TipIf the gauge is erratic, track mileage manually until the sender is repaired to avoid running the tank dry.
- TipReplace the tank seal and inspect the electrical connector for heat damage whenever the module is removed.
Sources for this issue (1)
Some M35 owners report inaccurate fuel level readings, including gauges that stick, read empty when fuel remains, or fluctuate unexpectedly. The issue is commonly related to wear or contamination in the fuel level sending unit inside the tank, which can affect trip planning and trigger low-fuel warnings incorrectly.
Common Symptoms
- Fuel gauge reads empty with fuel in tank
- Erratic fuel level movement
- Low fuel warning comes on too early
- Inaccurate distance-to-empty estimate
How to Fix
Compare gauge behavior to actual fill volume and scan for fuel level sensor data if available. Repair typically requires replacement of the faulty fuel level sending unit or pump module assembly, depending on which side of the saddle tank is affected. Because tank access is labor-intensive, many owners replace related seals and inspect the pump assembly at the same time.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
- OEM early M35/M45 driver-side fuel-level sending unitOEM25060-AL51A family
Confirm VIN/engine and failed side; not the passenger sender.
- OEM late M35/M45 driver-side fuel-level sending unitOEM25060-1NC0C
Confirm VIN and failed side; do not substitute the early sender.
- Genuine Infiniti passenger-side fuel-level sensor 25060-CD00AOEM25060-CD00A
Early passenger-side sender branch after testing identifies that side Fitment/availability: Select 25060-CD00A, listed as passenger side for 2006-2009 M35 applications in the early engine catalog. Confirm VIN/engine because the listing d…
As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.
Owner tips & cautions
- TipTrack mileage manually until the repair is completed, since the gauge may not be trustworthy.
- TipIf the tank is being opened, replace the seal and inspect wiring connectors to prevent future access-related leaks or faults.
Sources for this issue (1)
P0461 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does P0461 mean on a Infiniti?
P0461 stands for "Fuel Level Sensor 'A' Circuit Range/Performance." P0461 means the powertrain control module sees a fuel-level sensor signal that is implausible or doesn't change as expected — for instance, the reading stays fixed while fuel is consumed, or it moves erratically. The fuel level sensor (sending unit) in the tank reports how much fuel remains, and this data is also used by the EVAP system for certain leak monitors. Typically this only causes an inaccurate fuel gauge or skipped emissions tests rather than drivability problems. It is a low-urgency issue but worth fixing for an accurate gauge. On Infiniti it is documented across 2 models: FX35, M35.
What are the most common causes of P0461?
The most common causes of P0461 are: Faulty fuel level sensor / sending unit in the tank, Worn or dirty sending-unit resistor card or float, Wiring or connector problems to the sending unit, Corrosion at the fuel pump module connector, Stuck or damaged float arm, Poor ground for the sensor circuit, Instrument cluster or PCM fault (less common). The specific cause varies by vehicle.
How much does it cost to fix P0461 on a Infiniti?
Published repair estimates on Infiniti range from $300 to $900 depending on the model and root cause. If an issue mentions a recall or campaign, check your VIN with the manufacturer or NHTSA and confirm eligibility and coverage with a dealer.
Looking for P0461 on a different make?
View P0461 across all makes →Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.