Hyundai · Powertrain · Critical code

P0601 on Hyundai: How to Diagnose & Fix

Internal Control Module Memory Check Sum Error

1 Hyundai model · 1 documented issue · 1 critical · $400-$1,500 repair

Share:@au7o.io

P0601 on Hyundai by model: symptoms, diagnosis and fix

The 1.4L turbo-petrol SU2 Creta's 7-speed dry dual-clutch transmission has multiple well-documented failures in Indian stop-and-go traffic: clutch actuator failure (logged as DTC P060194), the gearbox refusing to engage odd-numbered gears until restart, transmission-overheat warnings in crawling traffic, and judder or delayed engagement from standstill. Team-BHP ownership threads document cars failing within months of delivery and failing again a year after dealer repairs, with Hyundai handling cases reactively rather than via recall. Out-of-warranty repairs are expensive — a full gearbox replacement runs roughly INR 80,000 to over 1.2 lakh.

Common Symptoms

  • Transmission hot / overheating warning in slow traffic
  • Judder or hesitation when accelerating from a stop
  • Odd-numbered gears not engaging until engine restart
  • Check engine light with powertrain error message on the cluster
  • Sudden loss of drive / limp mode

How to Fix

Dealers replace the failed clutch actuator or clutch pack (free under warranty); a destroyed transmission requires complete DCT replacement. Owners mitigate risk by avoiding prolonged clutch-slip situations (crawling in traffic or holding the car on inclines with throttle) and extending the powertrain warranty.

Typical repair cost:$400 - $1,500
Sources for this issue (6)

Research This Issue

Community Reported
High ConfidenceVerifiedUpdated Oct 27, 2026

P0601 code reference

General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.

Frequently asked questions

What does P0601 mean on a Hyundai?

P0601 stands for "Internal Control Module Memory Check Sum Error." The control module ran an internal self-check (checksum) on its memory and the calculated value did not match the stored value, indicating corrupted or failed internal memory. It is an internal module integrity fault. On Hyundai it is documented across 1 model: Creta.

What are the most common causes of P0601?

The most common causes of P0601 are: Corrupted or failed internal PCM/ECM memory, Faulty/aborted software reflash or programming, Low or unstable battery/system voltage during operation, Corroded PCM ground or power connectors, Defective control module. The specific cause varies by vehicle.

How much does it cost to fix P0601 on a Hyundai?

Published repair estimates on Hyundai range from $400 to $1,500 depending on the model and root cause. If an issue mentions a recall or campaign, check your VIN with the manufacturer or NHTSA and confirm eligibility and coverage with a dealer.

Looking for P0601 on a different make?

View P0601 across all makes →
🔧
A mechanic who knows YOUR exact car
Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
Get notified about P0601 fixes on Hyundai
We add new causes, fixes and affected Hyundai models for P0601 regularly — drop your email and we'll keep you posted. You can also diagnose your own car free.

Join 700+ subscribers following Au7o for vehicle insights and updates.

Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.

Explore free Hub demo