P0AEE on Toyota: How to Diagnose & Fix
Drive Motor Inverter Temperature Sensor "A" Circuit Range/Performance
1 Toyota model · 1 documented issue · 1 critical
P0AEE on Toyota by model: symptoms, diagnosis and fix
On the first- and second-generation Highlander Hybrid (2GR-FXE / 3MZ-FE hybrid), the Intelligent Power Module inside the hybrid inverter assembly carries control-board transistors whose operating temperature can exceed what the solder beneath them tolerates. The solder degrades, the transistor is heat-damaged, and the hybrid system throws multiple warning lamps. In most cases the vehicle drops into fail-safe/limp-home mode with sharply reduced power; in worse cases the power-supply-circuit fuse blows and the entire hybrid system shuts down while driving, stalling the vehicle. This is distinct from the inverter coolant pump failure and from HV traction-battery degradation — here it is the power electronics themselves, not the cooling loop or the pack. Toyota first recalled 2006-2007 cars (11V342000) and then broadened it to all 2006-2010 Highlander Hybrids built Feb 2005 through Jul 2010 under 13V396000 / Toyota campaign D0M.
Common Symptoms
- Multiple warning lights on at once — check engine, slip indicator, brake system, master warning
- Sudden loss of power / limp-home mode
- Hybrid system shuts down and vehicle stalls while driving
- Vehicle will not restart after shutdown
- Reduced acceleration, dashboard warning chime
How to Fix
Free recall remedy: dealers replace the Intelligent Power Module inside the inverter assembly at no cost under NHTSA 13V396000 (Toyota D0M) — check the VIN at nhtsa.gov/recalls, because many of these cars have changed hands several times and never had it done. If the VIN is not covered or the campaign has been performed and the fault returns, the repair is inverter assembly replacement (or specialist IPM board rework), which is the expensive path.
Sources for this issue (4)
P0AEE code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does P0AEE mean on a Toyota?
P0AEE stands for "Drive Motor Inverter Temperature Sensor "A" Circuit Range/Performance." Drive motor inverter temperature sensor 'A' signal is implausible or out of expected range relative to conditions. On Toyota it is documented across 1 model: Highlander.
What are the most common causes of P0AEE?
The most common causes of P0AEE are: Drifting/aging sensor, High-resistance connection, Wiring fault, Control module fault. The specific cause varies by vehicle.
How much does it cost to fix P0AEE on a Toyota?
Repair costs vary widely with the root cause and Toyota model; each issue on this page carries its own estimate where one is published.
Looking for P0AEE on a different make?
View P0AEE across all makes →Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.