P1614 on Nissan: How to Diagnose & Fix
NATS Key-ID Reception Fault (Nissan)
1 Nissan model · 1 documented issue · 1 critical
Narrow it down: which P1614 failure is yours on a Nissan?
On the reviewed 350Z branches, P1614 means the immobilizer is not receiving the ignition key’s identification. Key interference, the key and the antenna circuit must be separated before choosing a repair.
Check this first
Record whether the key turns and engine cranks, plus the ignition position when the security light is on. Separate other transponder keys or toll/payment tags and follow your exact owner’s manual. A no-start on both keys is not a component verdict.
If you have…
350Z no-start with confirmed key-ID reception fault; exact year and key system checked → NATS key-authentication no-start: lock mode or a key-read fault
The key-read branch checks the antenna installation, key and electrical paths before replacement.
On the scanner: Use confirmed Nissan ECM and NATS diagnostic coverage. Reading an engine code with a basic scanner does not establish NATS test or registration capability. Preserve all faults and use the exact-year service procedure.
P1614 on Nissan by model: symptoms, diagnosis and fix
The immobilizer checks the registered ignition key before permitting a start. A NATS lock-mode code and a key-read code describe different stages of that check, not a confirmed failed part. Interference, key identification and antenna-circuit faults need to be distinguished. A mechanical key-turning problem is a separate branch.
Common Symptoms
- Engine will not start with a registered key
- Security indicator remains on with ignition ON
- Intermittent key-authentication no-start
How to Diagnose
- 1
Safety: Keep owner checks outside the steering-column wiring. Do not force a key or probe airbag connectors. Column and electrical testing belongs with a qualified technician using the exact-year Nissan precautions.
source - 2
Note whether the key turns, whether the engine cranks, and the ignition position when the security light is on. — Observation and your owner’s manual
Good: Blinking with the ignition OFF, LOCK or ACC is normal; it is not a failed-part diagnosis.
If not: If the key will not turn, arrange a separate key/lock inspection. If it turns but the engine will not start, continue below.
source - 3
Separate other transponder keys and toll/payment tags from the ignition key. Follow the interference-restart instructions in your vehicle’s owner’s manual and note whether the registered spare behaves differently. — Registered ignition key and registered spare, if available
Good: Starting after removing interference can avoid an unnecessary parts purchase.
If not: If neither key starts the engine, stop repeated attempts and arrange diagnosis. That result alone does not prove an antenna or control-unit failure.
source - 4
Technician: save the complete fault report and identify which module reports each fault before clearing anything. Confirm the exact-year NATS diagnostic result. — Nissan CONSULT or confirmed equivalent ECM and NATS coverage
Good: P1610 identifies lock mode; P1614 identifies a key-ID reception problem. Neither names the part to buy.
If not: If other faults are present, follow their appropriate diagnostic branches rather than assuming every no-start is caused by the antenna.
source - 5
Technician: on a 2005-2008 no-start with P1610 as the only NATS code, follow NTB10-107 battery voltage/state-of-charge testing and service the battery if required. An unloaded voltage reading alone can miss the problem. Confirm starting after the directed fault clearing. Other NATS codes or an unresolved no-start need the applicable factory diagnosis. The bulletin says that if the security indicator is off during or after cranking, follow non-NATS no-start diagnosis instead of replacing NATS components. — Nissan-specified GR-8 battery test/service equipment or validated applicable equivalent
source - 6
Technician: for confirmed P1610, use the factory lock-mode recovery procedure with a registered key. For confirmed P1614, inspect antenna installation and follow the key-read circuit diagnosis. — Exact-year Nissan service information
Good: The lock-mode branch and key-read branch are separate; successful starting after recovery is recorded rather than treated as proof of a failed module.
If not: If starting does not recover, continue the exact factory diagnostic path. Do not buy a steering lock from P1610 or P1614 alone.
source - 7
Technician: verify antenna installation, power, signal and ground using the procedure matching the year and connector. Repair a confirmed connector or wiring fault, or replace the component isolated by the completed tests. — Factory wiring diagram and specified electrical test equipment
Good: A measured circuit fault is distinguished from a key or module fault. This summary does not substitute generic battery-voltage or coil-resistance values for the factory checks.
If not: If results or diagram labels are unclear, obtain the correct service information before a replacement decision. Do not guess from a code or a failed spare-key attempt.
source - 8
After the confirmed repair, complete any required key registration or control-unit initialization and verify starting with the owner’s registered keys. Bring all keys to the service visit. — Nissan-capable registration equipment when the repair requires it
Good: Starting is restored and the relevant fault does not recur during verification.
If not: If it returns, preserve the new fault report and continue diagnosis; do not treat code clearing as a repair.
source
How to Fix
First rule out key interference using the owner’s manual. Have an authorized dealer or qualified Nissan specialist distinguish P1610 lock mode from P1614 key-read failure. On 2005-2008 vehicles with P1610 as the only NATS code, check the battery under NTB10-107 before immobilizer parts diagnosis. Otherwise follow the matching key, antenna and circuit tests. Repair the confirmed fault and perform registration only when required, then verify starting. Bring all keys. A key that will not turn needs a separate mechanical inspection.
Find a Nissan dealer
Choose to share your location for this search, or enter an area below. Your search location is sent to Google to find dealers.
Open Nissan dealer map in Google Maps ↗Call to confirm they service Nissan vehicles and check your VIN, recall eligibility, parts availability, and appointment options.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
- Interstate MTP-35 Group 35 flooded starting batteryFits 2005-2008 · 3.5LCross-refInterstate MTP-35$224.95
2005-2008 Nissan 350Z 3.5L, only if NTB10-107 testing establishes replacement is required; confirm original tray, hold-down and polarity.
As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.
Sources for this issue (3)
P1614 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does P1614 mean on a Nissan?
P1614 stands for "NATS Key-ID Reception Fault (Nissan)." In the Nissan 350Z service information reviewed here, P1614 means the immobilizer is not receiving the ignition key identification signal. Check for interference, then use the exact-year key and antenna-circuit diagnostic procedure before replacing anything. This is not a verdict that the remote-control battery, starter or steering lock has failed. The paired P1610 code describes lock mode and has a separate diagnostic branch. Confirm the manufacturer definition before applying this Nissan guidance to another make. On Nissan it is documented across 1 model: 350Z.
What are the most common causes of P1614?
The most common causes of P1614 are: Interference from another transponder key or toll/payment tag, A key transponder fault requiring confirmation, Incorrect antenna installation or an antenna-related fault, A supply, signal, ground or connector fault in the key-read circuit. The specific cause varies by vehicle.
How much does it cost to fix P1614 on a Nissan?
Repair costs vary widely with the root cause and Nissan model; each issue on this page carries its own estimate where one is published.
Looking for P1614 on a different make?
View P1614 across all makes →Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.