C1696 on 2021-2024 Kia K5 — Manufacturer-Specific Chassis Fault
1 vehicles · 1 makes
How to diagnose and fix C1696: most-reported vehicles
Ranked by owner reports. Each card gives the symptoms, how to confirm the cause, the fix, parts and sources for that vehicle.
Kia K5 · 2021–2024
Multiple K5 owners and NHTSA complaints document unexpected, uninitiated hard braking events triggered by the Forward Collision Avoidance Assist system in the absence of any actual obstacle. These phantom braking events occur most commonly on highways, elevated roads, or in areas with overhead signs, bridges, or guardrails that the front radar and camera system misidentifies as collision threats. The issue represents a safety concern as following vehicles may be unable to react in time, increasing rear-end collision risk.
Common Symptoms
- Sudden hard braking with no obstacle present
- Forward Collision Warning alert with no vehicle or object ahead
- FCA system activating on bridges, overpasses, or metal guardrails
- Brake lights activating unexpectedly at highway speeds
- FCA warning light remaining on after phantom brake event
How to Fix
Kia has released multiple FCA software calibration updates through dealer reprogramming to improve object discrimination and reduce false positives. TSB reference DAS-007 addresses radar and camera fusion logic updates. Owners should have the forward radar sensor (part of the front bumper radar module) and windshield camera inspected for alignment. In persistent cases, FCA can be temporarily disabled via the Driver Assistance menu, though this is not recommended as a permanent fix.
Find C1696 by make
Browse every documented model and issue for your make.
C1696 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does C1696 mean?
C1696 stands for "Manufacturer-Specific Chassis Fault." C1696 is a manufacturer-specific chassis code, so its meaning depends on the vehicle's make and model. It generally indicates a fault detected within a chassis subsystem such as ABS, traction/stability control, suspension, or a related sensor/circuit. Because there is no single standardized definition and the code is not well documented across brands, the specific component and cause should be confirmed with the factory service manual or a brand-specific diagnostic tool.
What are the most common causes of C1696?
The most common causes of C1696 are: Faulty sensor in the affected chassis subsystem, Damaged wiring or connectors, Open or short circuit on a signal/control line, Corrosion or water intrusion at connectors, Low system voltage or poor ground, Related control module fault. The specific cause varies by vehicle.
How much does it cost to fix C1696?
Repair costs vary widely depending on the root cause and vehicle.
Which vehicles are affected by C1696?
Au7o has documented C1696 across 1 vehicle models from 1 manufacturers: Kia.
Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.