P0014 on Skoda: How to Diagnose & Fix
Exhaust Camshaft Position Timing - Over-Advanced (Bank 1)
2 Skoda models · 2 documented issues · 2 critical · $1,000-$3,500 repair
P0014 on Skoda by model: symptoms, diagnosis and fix
Mk2 and early Mk3 Octavias with the EA111 1.2 TSI (CBZA/CBZB) and 1.4 TSI Twincharger (CAVD/CTHE) engines suffer premature timing chain tensioner failure. The tensioner cannot maintain pressure during cold starts and shutdowns, causing the chain to slap, jump teeth, or in severe cases damage valves. Common in the 50,000-80,000 mi window. Same defect affects VW Polo/Golf/Touran, Seat Ibiza/Leon, Audi A1 with these engines. VW Group issued service campaign 13D2 for tensioner replacement on some VINs.
Common Symptoms
- Rattling noise from front of engine on cold start
- Misfires P0301-P0304
- Cam-crank correlation codes P0011/P0014/P0016
- Loss of compression
- Engine refuses to start
How to Fix
Replace timing chain, tensioner (updated INA part), guides, and idler. Cost €1,200-€2,000 in EU (£1,000-£1,800 UK). If chain has jumped causing valve damage, full top-end rebuild required (€3,500+). Check oil at every fuel stop on affected models.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
- Genuine Skoda 03F198158B 1.2 TSI timing set
replace the diagnosed complete CBZB timing-chain system Fitment/availability: Skoda Octavia II 1.2 TSI 77 kW CBZB from 02/2010 through 04/2013 as explicitly listed; confirm engine code and VIN, excludes EA211 belt engines Fitment/availab…
- EngineTeam 03C198229C complete 1.4 TSI timing set
replace the complete diagnosed CAXA chain system with the matched chain, tensioner, guides and sprockets Fitment/availability: Skoda Octavia II 1.4 TSI 90 kW CAXA from 11/2008 through 06/2013 as explicitly listed; confirm VIN and engine …
As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.
Same EA111 1.2 TSI timing chain tensioner defect as Octavia (above) — affects Mk2 (2010-2014) and early Mk3 (2014-2017) Fabia. Tensioner cannot hold pressure during cold start. Often slightly more prevalent on Fabia due to short-trip city use pattern typical of this segment.
Common Symptoms
- Cold-start rattle from front of engine
- Misfires
- Cam-crank correlation codes
- Severe cases: bent valves and no compression
How to Fix
Same as Octavia — full timing chain kit replacement with updated INA tensioner. €1,000-€1,800 in EU.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
- Volkswagen Group 03F198158B complete 1.2 TSI timing-chain kit
replace the diagnosed complete timing set on the duplicate EA111 repair card Fitment/availability: 2010-2014 Skoda Fabia II 1.2 TSI EA111 CBZA or CBZB; confirm engine code and OE supersession, exclude later belt-driven EA211 Fitment/avai…
As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.
P0014 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does P0014 mean on a Skoda?
P0014 stands for "Exhaust Camshaft Position Timing - Over-Advanced (Bank 1)." P0014 means the exhaust camshaft on bank 1 is timed too far advanced — the variable valve timing (VVT) system has moved the cam beyond the position the computer commanded, or it's stuck in an over-advanced position. The engine uses VVT to rotate the camshaft and optimize valve timing for power, economy, and emissions; the computer compares the commanded cam position to the actual reading from the cam sensor and flags this code when they don't agree. Common results are rough idle, reduced power, poor fuel economy, or a rattle at start-up. Oil flow and the VVT actuator are the usual suspects. On Skoda it is documented across 2 models: Octavia, Fabia.
What are the most common causes of P0014?
The most common causes of P0014 are: Low or dirty engine oil restricting VVT operation, Stuck or failed camshaft oil control valve (VVT solenoid), Clogged VVT solenoid screen or oil passages, Faulty camshaft phaser/actuator, Wiring or connector fault at the oil control valve, Stretched timing chain or jumped timing, Camshaft position sensor fault giving incorrect reading. The specific cause varies by vehicle.
How much does it cost to fix P0014 on a Skoda?
Published repair estimates on Skoda range from $1,000 to $3,500 depending on the model and root cause. If an issue mentions a recall or campaign, check your VIN with the manufacturer or NHTSA and confirm eligibility and coverage with a dealer.
Looking for P0014 on a different make?
View P0014 across all makes →Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.