P0299 on Toyota: How to Diagnose & Fix
Turbo/Supercharger Underboost Condition
1 Toyota model · 2 documented issues · 2 critical
P0299 on Toyota by model: symptoms, diagnosis and fix
Toyota recalled approximately 98,568 Tundras with the new 3.4L twin-turbocharged V6 engine due to machining debris left in the engines during production. This debris can damage the crankshaft bearings, leading to engine knock, rough running, no-start conditions, and sudden loss of power while driving at highway speeds.
Common Symptoms
- Engine knocking noise
- Rough engine running
- Engine stalling
- No-start condition
- Sudden power loss at speed
- Check engine light
How to Fix
Toyota will inspect and replace affected engines under recall free of charge. Engine replacement is the primary remedy. Owners experiencing symptoms should stop driving immediately and contact Toyota.
Find a Toyota dealer
Choose to share your location for this search, or enter an area below. Your search location is sent to Google to find dealers.
Open Toyota dealer map in Google Maps ↗Call to confirm they service Toyota vehicles and check your VIN, recall eligibility, parts availability, and appointment options.
Owner tips & cautions
- WarningThis is a high-severity issue - ignoring it can lead to costly repairs or safety concerns. Address it promptly.
- TipGet a proper diagnosis before replacing parts - similar symptoms can have different causes
- TipSearch Toyota Tundra forums and owner groups for real-world experiences and DIY guides
- TipGet multiple quotes from independent mechanics - dealer prices can be 2-3x higher for the same repair
Sources for this issue (3)
Third-generation Tundras with the V35A-FTS twin-turbo V6 (both gas and i-FORCE MAX hybrid) commonly throw boost/wastegate fault codes due to failure of the electronic wastegate actuators integrated into the turbo housings. Early 2022 builds were affected by a bad batch of actuators with an internal electrical fault; thermal cycling also fatigues the actuator over time. When the actuator binds or its circuit fails, the ECU cuts boost and drops the engine into reduced-power/limp mode. Because the actuator is part of the turbo housing, Toyota's initial procedure required replacing the entire turbocharger — an extremely labor-intensive job that can require pulling the cab. This is a distinct, separate failure from the metal-debris main-bearing engine-replacement recall.
Common Symptoms
- Check engine light with boost/wastegate codes
- Sudden loss of power / limp mode
- Reduced acceleration or no boost
- Rattling or buzzing from turbo area
- Inconsistent throttle response
How to Fix
Scan for boost-control/wastegate codes and confirm actuator function. Under powertrain warranty Toyota replaces the affected turbocharger/wastegate assembly. For the early-2022 'bad batch,' replacement of the updated actuator/turbo resolves the recurring CEL. Out of warranty this is a major repair; some independent shops can replace just the actuator on the updated procedure where supported.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
- Toyota 17201-F4011 genuine left turbocharger subassembly
replace a repair-manual-confirmed defective left turbocharger/wastegate subassembly Fitment/availability: Left/driver-side V35A turbo branch; catalog supersedes 17201-70070 and 17201-F4010, and VIN, gas-versus-hybrid configuration, produ…
- Toyota 17208-F4011 genuine right turbocharger subassembly
replace a repair-manual-confirmed defective right turbocharger/wastegate subassembly Fitment/availability: Right/passenger-side V35A turbo branch; catalog supersedes 17208-70070 and 17208-F4010, and VIN, gas-versus-hybrid configuration, …
As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.
Sources for this issue (3)
P0299 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does P0299 mean on a Toyota?
P0299 stands for "Turbo/Supercharger Underboost Condition." P0299 means the engine computer detected an underboost condition — the turbocharger or supercharger is producing less boost pressure than the PCM expects for the given conditions. The computer compares the manifold/boost pressure sensor reading to a target based on engine load, and when actual boost falls short, it sets this code. The most common real-world cause is a leak somewhere in the intake/charge-air path. You'll typically feel reduced power or sluggish acceleration, and the engine may go into a reduced-power mode. On Toyota it is documented across 1 model: Tundra.
What are the most common causes of P0299?
The most common causes of P0299 are: Boost/intake leak (cracked or loose charge-air hose or intercooler), Faulty or sticking turbo wastegate or actuator, Stuck or clogged variable-geometry turbo vanes (VGT), Faulty boost pressure or MAP sensor, Leaking or disconnected vacuum/boost control lines, Restricted air intake or clogged air filter, Failed boost control solenoid, Worn or failing turbocharger. The specific cause varies by vehicle.
How much does it cost to fix P0299 on a Toyota?
Repair costs vary widely with the root cause and Toyota model; each issue on this page carries its own estimate where one is published.
Looking for P0299 on a different make?
View P0299 across all makes →Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.