U0404 on 2011-2023 RAM 1500 — Invalid Data Received From Gear Shift Control Module A
1 vehicles · 1 makes · $300-$900 repair
How to diagnose and fix U0404: most-reported vehicles
Ranked by owner reports. Each card gives the symptoms, how to confirm the cause, the fix, parts and sources for that vehicle.
RAM 1500 · 2011–2023
4WD-equipped Ram 1500 trucks use an electric shift motor (encoder/gear motor) bolted to the BorgWarner transfer case to move between 2WD, 4WD-Auto, 4-High and 4-Low. The motor's internal plastic gears wear or strip, and water/road-salt intrusion corrodes the connector and motor windings, so the system fails to complete a shift. The dash shows 'Service 4WD,' the mode indicator blinks without engaging, and grinding or clicking can be heard from under the truck. A large share of Ram 4WD-engagement complaints trace to the shift motor rather than internal transfer-case damage, so it is usually a relatively affordable fix if caught early. FCA TSB 08-094-20 provides a Drivetrain Control Module (DTCM) software update for 2016-2020 trucks with this symptom.
Common Symptoms
- 'Service 4WD' warning message
- 4WD will not engage or disengage
- Mode indicator blinks but never locks in
- Grinding or clicking under the truck when shifting modes
- Stuck in 2WD or stuck in 4WD
How to Fix
Scan for transfer-case/DTCM codes and check the connector for corrosion first. Apply the DTCM software update (TSB 08-094-20) if applicable. If the motor's gears are stripped or windings are open, replace the transfer case shift/gear motor (verified Mopar PN 68450803AA for 2019-2025 DT; actuator 68369691AD) and reprogram if required. Keep the connector clean and protected from salt; for trucks used in snow/off-road, periodic inspection prevents being stranded in the wrong mode.
What you need to fix it
Only diagnosis- and fitment-reviewed repair parts are linked here.
- Genuine Mopar 68089746AC transfer-case actuator
Confirm VIN, case tag and connector because the catalog also covers HD trucks and not every 1500 configuration.
- Replacement 914-006 7-pin BW44-44/BW44-45 transfer-case motor
The listing excludes 2016, so do not extrapolate.
- Genuine Mopar 68679351AA active transfer-case shift motor
Confirm VIN and transfer-case sales code.
As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.
Sources for this issue (3)
Find U0404 by make
Browse every documented model and issue for your make.
U0404 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does U0404 mean?
U0404 stands for "Invalid Data Received From Gear Shift Control Module A." Sets when a module receives invalid data from Gear Shift Control Module 'A' (shift-by-wire) over the bus. Bus integrity, calibration, or module faults are typical.
What are the most common causes of U0404?
The most common causes of U0404 are: CAN bus wiring fault or poor ground, Weak battery / low voltage, Calibration mismatch, Failing gear shift control module. The specific cause varies by vehicle.
How much does it cost to fix U0404?
Repair costs for U0404 range from $300 to $900, depending on the vehicle and root cause.
Which vehicles are affected by U0404?
Au7o has documented U0404 across 1 vehicle models from 1 manufacturers: RAM.
Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.