Au7o mascotAu7o
Known IssuesTest Hub demo
  1. Au7o
  2. /
  3. Known Issues
  4. /
  5. Mazda
  6. /
  7. MX-5 Miata
Mazda · Known Issues

2007 Mazda MX-5 Miata Problems: 6 Known Issues

2007 model year · 8,800+ owner reports · Updated September 2026

Share:@au7o.io

2007 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

Known IssuesMotorcycle IssuesDTC LookupDrivePricingAboutTermsPrivacyCookiesConsentData rightsCopyrightFeedback
Share:@au7o.io

Vehicle data and repair guidance on this site are compiled with AI assistance and may contain errors. Always verify with your service manual or a qualified mechanic.

Data protection representation

DataRep representative in the United KingdomDataRep representative in the European Union
Au7o · 2026
Built for DIY mechanics. Privacy-first.
Explore free Hub demo
No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example
Issue summary

According to Au7o's analysis of 8,800+ owner reports, the 2007 Mazda MX-5 Miata has 6 documented known issues, with 1 rated critical. The most serious is Clutch Slave Cylinder Piston Seal Leak - Sudden Loss of Clutch Release ($60-$400 repair). The most commonly reported issue is Soft Top Wear and Rear Window Delamination with 5,000 owner reports. Across all issues with published estimates, repair costs range from $60 to $2,500. DIY maintenance guides at au7o.io.

In This Article

  • MX-5 Miata Transmission2
  • MX-5 Miata Exterior1
  • MX-5 Miata Engine1
  • MX-5 Miata Body/Panels1
  • MX-5 Miata Steering1
  • FAQ
Get Started
Back to top

In This Article

  • Transmission2
  • Exterior1
  • Engine1
  • Body/Panels1
  • Steering1
  • FAQ

All 6 Known Issues

Filter:
ALL YEARS202520242023202220212020201920182017201620152014201320122011201020092008200720062005200420032002200120001999199819971996199519941993199219911990

On the 1990-2008 Mazda MX-5 Miata, the externally mounted clutch slave cylinder on NA/NB/NC Miatas fails at the piston seal. Fluid weeps past the seal and collects behind the rubber boot, then the cylinder stops holding pressure and the pedal drops to the floor with no gear engagement - frequently without warning. Cars fitted with high-clamp aftermarket pressure plates fail sooner because of the higher pedal pressure, and owners repeatedly report cheap non-Mazda replacement cylinders lasting under a year. The ND uses a different, largely plastic-bodied slave (N251-41-920) that owners also criticize for durability.

Common Symptoms

  • Clutch pedal goes to the floor and stays down
  • Cannot select gears with the engine running
  • Pedal feels progressively softer over weeks
  • Fluid loss from the clutch reservoir with no visible brake leak
  • Wet fluid behind the slave cylinder rubber boot

How to Fix

Diagnose by pulling back the slave cylinder's rubber boot: wet fluid there condemns the unit. Replace with a genuine Mazda slave cylinder rather than a budget parts-store unit, and inspect the flexible clutch line at the same time. Bleed the system thoroughly - the slave traps air, so gravity-bleed or reverse-bleed if the pedal stays soft. If the master cylinder is also weeping at the firewall pushrod, replace both together and flush the fluid, since contaminated old fluid attacks the seals.

Typical repair cost:$60 - $400

Research This Issue

GoogleRedditYouTubeNHTSA
Community Reported
Low ConfidenceVerifiedReviewed Aug 2026

On the 2006-2015 Mazda MX-5 Miata, the NC six-speed manual is widely reported to baulk and crunch on the 1-2 upshift when cold, and on many cars the second-gear synchro degrades until the grind persists warm. Contributing factors documented by owners are the factory gear oil's poor cold flow, a clutch release point that sits very high in the pedal travel so the clutch is not fully disengaged during a quick shift, and genuine brass synchro wear. A cold-only crunch is near-universal; grinding after the gearbox is warm indicates real synchro damage.

Common Symptoms

  • Crunch or grind shifting into 2nd when cold
  • Second gear nearly impossible to engage on the first cold shift
  • Notchy shift that improves as the car warms
  • Grinding on 1-2 even when warm (advanced wear)
  • Shift feel very sensitive to the direction of lever pressure

How to Fix

First, drain the factory fluid and refill with a quality GL-4 manual gearbox oil (Redline MT-90 is the community standard) - this alone resolves most cold-shift complaints. Second, bleed the clutch hydraulics and verify the release point; a high or spongy pedal means the clutch is dragging into the shift. If grinding continues once warm, the second-gear synchro and blocker ring are worn and the transmission needs to come out for a rebuild or replacement.

Typical repair cost:$80 - $2,500

Research This Issue

GoogleRedditYouTubeNHTSA
Community Reported
Low ConfidenceVerifiedReviewed Aug 2026
Community reported
5,000 owners

On the 1990-2025 Mazda MX-5 Miata, miata soft tops deteriorate over time from UV exposure, flexing during operation, and age. Vinyl tops develop cracks and tears, cloth tops fade and shrink. The rear plastic window (NA/NB) or glass window (NC/ND) can delaminate from the top material, causing water leaks and reduced visibility. Expected soft top life is 7-10 years with proper care.

Common Symptoms

  • Visible cracks or tears in top material
  • Rear window yellowing, hazing, or separating from fabric
  • Water leaks into cabin during rain
  • Top material shrinking and pulling away from frame
  • Difficulty latching top due to shrinkage

How to Fix

Replace soft top assembly. OEM replacement is available but aftermarket options (Robbins, TwinTop) offer better materials at lower cost. For NA/NB, replace rear window at same time. Apply 303 Aerospace Protectant or RaggTopp UV treatment every 3-6 months to maximize top life.

Owner tips & cautions

  • TipNever fold the top with a cold/stiff rear window (NA/NB) - causes permanent creases and cracks
  • TipDIY soft top replacement is doable in a weekend with Miata.net installation guide
Typical repair cost:$300 - $1,500

Research This Issue

Based on 5,000 owner reports

GoogleRedditYouTubeNHTSA
Community Reported
High ConfidenceVerified5,000 owner reportsLast reported by owners Nov 2024Reviewed Feb 2026
Community reported
3,800 owners

On the 1990-2015 Mazda MX-5 Miata, all generations of Miata (NA through NC) are prone to rear main seal leaks as the engine ages. Oil seeps from the crankshaft rear seal, dripping onto the clutch housing and eventually contaminating the clutch disc. High mileage engines and infrequent oil changes accelerate seal deterioration. This is a labor-intensive repair as the transmission must be removed.

This issue also affects: Mazda Miata

Common Symptoms

  • Oil dripping from bell housing area (bottom of engine/transmission junction)
  • Oil smell when parked
  • Clutch slipping if oil contaminates clutch disc
  • Low oil level between changes

How to Fix

Replace rear main crankshaft seal. Since the transmission must be removed, replace the clutch, throwout bearing, and pilot bearing at the same time if they are worn. Clean bell housing thoroughly to remove oil contamination.

What you need to fix it

Only diagnosis- and fitment-reviewed repair parts are linked here.

  • Genuine Mazda BP05-11-312 rear main seal
    OEMMazda BP05-11-312

    Rear crankshaft seal after leak-source diagnosis for the corrected NA/NB branch Fitment/availability: The inspected direct OEM page lists BP05-11-312 as the rear crankshaft oil seal, replacing B630-11-312, for 1990-1997 and 1999-2005 Mia…

    MazdaPartsNow
  • Genuine Mazda 903-465 NC rear main seal
    OEMMoss 903-465 / genuine Mazda NC rear main seal

    Confirm whether the exact repa

    Moss Miata

As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

Owner tips & cautions

  • TipReplace clutch, throwout bearing, and pilot bearing during rear main seal job - saves labor
  • TipUse Mazda OEM seal over aftermarket - better fitment and longevity. Miata.net seal replacement guide
  • TipA small amount of seepage is normal on high-mileage Miatas - only repair if dripping
Typical repair cost:$400 - $1,200

Research This Issue

Based on 3,800 owner reports

GoogleRedditYouTubeNHTSA
Community Reported
High ConfidenceVerified3,800 owner reportsLast reported by owners Oct 2024Reviewed Feb 2026

On the 2006-2015 Mazda MX-5 Miata, the NC soft top channels water from the rain rail into two drains behind the seats that route down through the body and exit under the car. Pollen, leaves and acorns pack the drain screens, and the flexible exit tube frequently pops off its spigot inside the quarter panel. Once blocked, water backs up over the drain platform and pours behind the seats into the footwells and the trunk area. Owners often discover it only as soaked carpet, a musty smell, corroded floor-mounted electrical connectors, or standing water under the seats.

Common Symptoms

  • Wet carpet in one or both footwells after rain
  • Water pooling under the seats
  • Damp or flooded trunk
  • Musty or mildew smell in the cabin
  • Water standing in the drain wells behind the seats

How to Fix

Clear both drains from the top with low-pressure air or a length of weed-trimmer line - do not force stiff wire, which punctures the tube. Confirm water exits under the car by pouring a cup into the rain rail. Inspect and re-seat the lower drain tube where it slips onto the body spigot; a dislodged tube is the most common non-obvious cause. Dry and treat the carpet and underlay, and add the drains to a twice-yearly cleaning routine.

Typical repair cost:$0 - $400

Research This Issue

GoogleRedditYouTubeNHTSA
Community Reported
High ConfidenceVerifiedReviewed Aug 2026

On the 2006-2015 Mazda MX-5 Miata, the NC Miata uses an electric power steering system that can fail due to a faulty steering angle sensor, EPS control module, or motor. When the system fails, the EPS warning light illuminates and power assist is lost, making the steering very heavy at low speeds. While the car remains drivable (it is manual rack-and-pinion underneath), parking and tight maneuvers become difficult.

Common Symptoms

  • EPS warning light on dashboard
  • Sudden loss of power steering assist
  • Heavy steering at low speed
  • Intermittent power steering assist
  • Steering assist returns after restart

How to Fix

Diagnose with a Mazda scan tool to identify the specific failed component (sensor, module, or motor). The steering angle sensor is the most common failure and can be recalibrated or replaced relatively affordably. If the EPS motor or control module has failed, replacement costs are higher. Some owners have had success with used EPS units from junkyards ($200-$400).

Typical repair cost:$200 - $1,200

Research This Issue

GoogleRedditYouTubeNHTSA
Community Reported
Medium Confidence
🔧
A mechanic who knows YOUR exact car
Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
Get ahead of Mazda MX-5 Miata problems — free
Leave your email and we'll alert you the moment there's a new recall or known issue for your Mazda MX-5 Miata. Free, no account needed.

Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.

Other Mazda Models

Mazda CX-530Mazda CX-6027Mazda CX-5026Mazda MX-621Mazda Mazda319Mazda CX-7019

Frequently Asked Questions

What are the most common Mazda MX-5 Miata problems?

According to Au7o's analysis of 8,800+ owner reports, the 2007 Mazda MX-5 Miata has 6 documented issues. The most frequently reported are: Clutch Slave Cylinder Piston Seal Leak - Sudden Loss of Clutch Release, Soft Top Wear and Rear Window Delamination, Rear Main Seal Oil Leak. Of these, 1 is rated critical and should be addressed promptly.

Is the Mazda MX-5 Miata reliable?

The 2007 Mazda MX-5 Miata has 6 known issues documented across 8,800+ owner reports. 1 issue is rated critical: Clutch Slave Cylinder Piston Seal Leak - Sudden Loss of Clutch Release. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

How much does it cost to fix common Mazda MX-5 Miata problems?

Repair costs for known Mazda MX-5 Miata issues range from $0 to $2,500, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, Clutch Slave Cylinder Piston Seal Leak - Sudden Loss of Clutch Release, typically costs $60-$400 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

What is the 1990-2008 Mazda MX-5 Miata Clutch Slave Cylinder Piston Seal Leak - Sudden Loss of Clutch Release?

The externally mounted clutch slave cylinder on NA/NB/NC Miatas fails at the piston seal. Fluid weeps past the seal and collects behind the rubber boot, then the cylinder stops holding pressure and the pedal drops to the floor with no gear engagement - frequently without warning. Repairs typically run $60-$400. Severity: high.

What is the 1990-2025 Mazda MX-5 Miata Soft Top Wear and Rear Window Delamination?

Miata soft tops deteriorate over time from UV exposure, flexing during operation, and age. Vinyl tops develop cracks and tears, cloth tops fade and shrink. The rear plastic window (NA/NB) or glass window (NC/ND) can delaminate from the top material, causing water leaks and reduce… Repairs typically run $300-$1,500. Severity: medium.

Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.

Data sourced from 8,800+ owner reports, NHTSA recalls, TSBs, and automotive forums.

What is the 1990-2015 Mazda MX-5 Miata Rear Main Seal Oil Leak?

All generations of Miata (NA through NC) are prone to rear main seal leaks as the engine ages. Oil seeps from the crankshaft rear seal, dripping onto the clutch housing and eventually contaminating the clutch disc. High mileage engines and infrequent oil changes accelerate seal d… Repairs typically run $400-$1,200. Severity: medium.

What is the 2006-2015 Mazda MX-5 Miata NC Convertible Top Rain-Rail Drain Blockage Flooding Footwells and Trunk?

The NC soft top channels water from the rain rail into two drains behind the seats that route down through the body and exit under the car. Pollen, leaves and acorns pack the drain screens, and the flexible exit tube frequently pops off its spigot inside the quarter panel. Once b… Repairs typically run $0-$400. Severity: medium.

What is the 2006-2015 Mazda MX-5 Miata NC 6-Speed Cold 1-2 Shift Grind and Second Gear Synchro Wear?

The NC six-speed manual is widely reported to baulk and crunch on the 1-2 upshift when cold, and on many cars the second-gear synchro degrades until the grind persists warm. Contributing factors documented by owners are the factory gear oil's poor cold flow, a clutch release poin… Repairs typically run $80-$2,500. Severity: medium.

What is the 2006-2015 Mazda MX-5 Miata Electric Power Steering (EPS) Failure and Warning Light (NC)?

The NC Miata uses an electric power steering system that can fail due to a faulty steering angle sensor, EPS control module, or motor. When the system fails, the EPS warning light illuminates and power assist is lost, making the steering very heavy at low speeds. While the car re… Repairs typically run $200-$1,200. Severity: medium.