Au7o mascotAu7o
Known IssuesTest Hub demo
  1. Au7o
  2. /
  3. Known Issues
  4. /
  5. Acura
  6. /
  7. NSX
Acura · Known Issues

1999 Acura NSX Problems: 3 Known Issues

1999 model year · NHTSA recalls, manufacturer TSBs, and owner forum reports · Updated August 2026

Share:@au7o.io

1999 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example
Known IssuesMotorcycle IssuesDTC LookupDrivePricingAboutTermsPrivacyCookiesConsentData rightsCopyrightFeedback
Share:@au7o.io

Vehicle data and repair guidance on this site are compiled with AI assistance and may contain errors. Always verify with your service manual or a qualified mechanic.

Data protection representation

DataRep representative in the United KingdomDataRep representative in the European Union
Au7o · 2026
Built for DIY mechanics. Privacy-first.
Explore free Hub demo
Issue summary

According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 1999 Acura NSX has 3 documented known issues, with 1 rated critical. The most serious is ALB/ABS modulator pump times out and pressure sensor fails on NA1 NSX (1991-1999) ($105-$2,600 repair). Across all issues with published estimates, repair costs range from $25 to $2,600. DIY maintenance guides at au7o.io.

In This Article

  • NSX Brakes1
  • NSX HVAC1
  • NSX Body/Panels1
  • FAQ
Get Started
Back to top

In This Article

  • Brakes1
  • HVAC1
  • Body/Panels1
  • FAQ

All 3 Known Issues

Filter:
ALL YEARS199919981997199619951994199319921991

When Issues Typically Appear

Targa roof gaskets harden, wind noise increases and water leaks under heavy rain
30K-200K
ALB/ABS modulator pump times out and pressure sensor fails on NA1 NSX (1991-1999)
50K-150K
Climate control unit display pixel fade and dead buttons (1991-1999 NA1)
60K-150K
050K100K150K200K mi

On the 1991-1999 Acura NSX, the first-generation NSX uses an Anti-Lock Brake (ALB) hydraulic modulator with a high-pressure pump, accumulator, and pressure sensor. The pump is designed to charge the accumulator and then stop within 120 seconds. When internal O-rings dry and the pump can no longer build pressure — or when the pressure sensor itself fails — the pump runs continuously for the full 120 seconds before timing out, the ABS warning light comes on, and the system disables. Once the system disables, the car still stops on its base brakes but loses ABS function entirely. Acura's North American service policy mandates replacing the modulator, pump, and accumulator as whole assemblies (about $2,100 in parts alone, $2,600 total dealer cost) — but the failure is almost always either a $100 O-ring set or a pressure sensor, both serviceable internally.

Common Symptoms

  • ABS / ALB warning light comes on and stays on
  • Pump runs continuously for about 120 seconds before timing out
  • Loss of ABS function; base brakes still work but no anti-lock
  • Audible pump motor cycling when ignition is on
  • Blown ALB fuse on repeated key cycles

How to Fix

Three repair paths, from cheap to expensive. (1) DIY O-ring rebuild with the SOS or egmCarTech kit ($105-200), which replaces the brake-fluid-resistant O-rings inside the modulator; the kit includes a bleeder T-wrench and 28-piece O-ring set. (2) Professional rebuild by a specialist (AutoECU, ScienceofSpeed, etc.) for around $795 — they pull the unit, replace O-rings and the pump motor brushes if worn. (3) Dealer full-assembly replacement at $2,100-2,600. There is also a documented upgrade path to swap the 1991-1999 NA1 modulator for the 2000-2005 NA2 unit using the SOS conversion kit, which simplifies the system and improves long-term reliability. Before any repair, check that the failure isn't simply rodent damage to the pump motor wires under the car — a blown ALB fuse from chewed wires presents the same way and costs $10 to fix.

Owner tips & cautions

  • TipBefore assuming a $795-2600 repair, check for rodent damage on the pump motor wires under the car. Mice chewing the harness is a known NSX cause of ALB-fuse blowing that mimics modulator failure.
  • TipThere is an SOS NA2 conversion kit that swaps the 1991-1999 NA1 modulator for the simpler 2000-2005 NA2 unit. Documented on nsxfaq.com/upgrade-to-2000-2005-abs-using-sos-kit/.
  • WarningSome independent shops will sell you a full dealer-assembly replacement when an O-ring rebuild would have fixed it. Get a second opinion from an NSX specialist before approving a $2,000+ ABS bill.
Typical repair cost:$105 - $2,600

Research This Issue

GoogleRedditYouTubeNHTSA
Manually Verified
High ConfidenceVerifiedReviewed May 2026

On the 1991-1999 Acura NSX, the NSX climate control unit (CCU) sits in the center console and uses an LCD display plus push-buttons to set temperature and fan. Over time the LCD pixels fade — typically starting at the top of the display and progressing down — until the temperature setting is unreadable. Separately or simultaneously, individual buttons stop responding because the conductive carbon pads on the rubber button backs wear off, and the circuit board's electrolytic capacitors dry out and leak. Acura's only remedy is full CCU replacement, which is typically out of stock or back-order from Honda parts and was originally priced over $1,000. Several NSX specialists rebuild the existing CCU for $150-300 by replacing the LCD, button pads, and capacitors — the unit then works like new and the original equipment is preserved.

Common Symptoms

  • Top rows of the LCD display fade or go blank
  • Temperature setting unreadable in daylight
  • Individual buttons (fan up/down, mode, defrost) stop responding
  • Display goes completely dark intermittently
  • Display works after cool weather but fades when cabin warms up

How to Fix

Mail-in CCU repair from an NSX specialist is the standard fix. ScienceofSpeed, AutoTechRescue, SpeedoFix, NSXe-repair, and ModuleRepairPro all offer rebuild service for around $150-300 with 1-3 day turnaround. Removal is a 20-30 minute job at home — pop the armrest, shift knob, ashtray, and center console trim, then four screws hold the CCU. Reinstallation requires no programming or coding. Avoid full Acura CCU replacement: even when available, the part is over $1,000 and the rebuilt original works identically. Common rebuild scope: LCD module, all rubber button pads, electrolytic capacitors C1/C2/C3 on the main board, and reflow on heat-stressed solder joints.

Owner tips & cautions

  • TipDon't pay Acura $1,000+ for a replacement CCU when the original can be rebuilt for under $300. The rebuilt unit works identically and requires no coding to reinstall.
  • TipRemoval is DIY-friendly (20-30 min). Pop the armrest, shift knob, ashtray, console trim, then 4 screws hold the CCU. Two connectors disconnect by hand.
  • WarningMultiple specialists offer this service — AutoTechRescue, SpeedoFix, NSXe-repair, ModuleRepairPro. Get a quote from 2+ before shipping, prices vary $50-100.
Typical repair cost:$150 - $1,000

Research This Issue

GoogleRedditYouTubeNHTSA
Manually Verified
High ConfidenceVerifiedReviewed May 2026

On the 1995-1999 Acura NSX, the NSX-T (T = Targa, optional from 1995) uses two rubber gaskets mounted on the Targa roof panel — one above each side window — plus seals around the panel perimeter that mate to the body when the roof is installed. The rubber dries and hardens with age and UV exposure, and wind noise becomes pronounced at highway speed. Under heavy rain, water can enter between the two gaskets and the side-window glass, particularly when the car is in motion (chassis flex pulls the seal away from the glass). The seals can be replaced but Honda's installation procedure is genuinely complex — the factory service manual section runs six pages and calls for 0.5mm butyl tape, 3.0mm EPT sealer, and Honda sealant #08712-0004. DIY replacement frequently fails because the bedding and alignment require care. Regular treatment with Honda Shin-Etsu silicone grease (P/N 08798-9013) significantly extends life of the existing seals.

Common Symptoms

  • Noticeable wind noise at the Targa-panel-to-glass interface above 50 mph
  • Whistling from the side-window upper corner
  • Water dripping inside the cabin during heavy rain (especially driving)
  • Damp carpet or headliner near the A-pillar
  • Visible cracks, gaps, or compression-set on the rubber Targa gaskets

How to Fix

Two stages. PREVENTIVE: clean the gaskets monthly with isopropyl alcohol, then apply Honda Shin-Etsu silicone grease (P/N 08798-9013) — this is the same grease used on the door weatherstripping and prevents drying-out. A small tube ($15-25) lasts years. If gaskets are already cracked or compression-set, REPLACE: OEM Honda Targa seals run $300-500 for the set. Use the exact butyl tape (0.5mm) and EPT sealer (3.0mm) called out in the service manual, plus sealant #08712-0004. Most NSX owners use an NSX specialist (ScienceofSpeed, Driving Ambition, NSX Modified) for the install — $400-700 in labor — rather than DIY, because the alignment determines water-tightness and a mis-bedded seal leaks worse than the old one.

Owner tips & cautions

  • TipIf you're DIY-replacing the Targa seals, follow the factory service manual EXACTLY. The 6-page procedure with specific butyl tape (0.5mm), EPT sealer (3.0mm), and sealant #08712-0004 is not optional — wrong bedding leaks worse than worn seals.
  • WarningDon't use generic silicone spray or Armor All on these seals. Petroleum-based products break down the rubber. Shin-Etsu silicone grease is the only OEM-spec option.
Typical repair cost:$25 - $1,200

Research This Issue

GoogleRedditYouTubeNHTSA
Manually Verified
High ConfidenceVerifiedReviewed May 2026
🔧
A mechanic who knows YOUR exact car
Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
Get ahead of Acura NSX problems — free
Leave your email and we'll alert you the moment there's a new recall or known issue for your Acura NSX. Free, no account needed.

Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.

Other Acura Models

Acura Integra19Acura RDX17Acura TLX15Acura TL14Acura RSX14Acura MDX12

Frequently Asked Questions

What are the most common Acura NSX problems?

According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 1999 Acura NSX has 3 documented issues. The most frequently reported are: ALB/ABS modulator pump times out and pressure sensor fails on NA1 NSX (1991-1999), Climate control unit display pixel fade and dead buttons (1991-1999 NA1), Targa roof gaskets harden, wind noise increases and water leaks under heavy rain. Of these, 1 is rated critical and should be addressed promptly.

Is the Acura NSX reliable?

The 1999 Acura NSX has 3 known issues compiled from NHTSA recalls, manufacturer TSBs, and owner forum reports. 1 issue is rated critical: ALB/ABS modulator pump times out and pressure sensor fails on NA1 NSX (1991-1999). Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

How much does it cost to fix common Acura NSX problems?

Repair costs for known Acura NSX issues range from $25 to $2,600, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, ALB/ABS modulator pump times out and pressure sensor fails on NA1 NSX (1991-1999), typically costs $105-$2,600 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

What is the 1991-1999 Acura NSX ALB/ABS modulator pump times out and pressure sensor fails on NA1 NSX (1991-1999)?

The first-generation NSX uses an Anti-Lock Brake (ALB) hydraulic modulator with a high-pressure pump, accumulator, and pressure sensor. The pump is designed to charge the accumulator and then stop within 120 seconds. When internal O-rings dry and the pump can no longer build pres… Repairs typically run $105-$2,600. Severity: high.

What is the 1991-1999 Acura NSX Climate control unit display pixel fade and dead buttons (1991-1999 NA1)?

The NSX climate control unit (CCU) sits in the center console and uses an LCD display plus push-buttons to set temperature and fan. Over time the LCD pixels fade — typically starting at the top of the display and progressing down — until the temperature setting is unreadable. Sep… Repairs typically run $150-$1,000. Severity: medium.

Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.

Data compiled from NHTSA recalls, manufacturer TSBs, automotive forums, and AI-assisted research. No aggregated owner-report counts available for this vehicle yet.

What is the 1995-1999 Acura NSX Targa roof gaskets harden, wind noise increases and water leaks under heavy rain?

The NSX-T (T = Targa, optional from 1995) uses two rubber gaskets mounted on the Targa roof panel — one above each side window — plus seals around the panel perimeter that mate to the body when the roof is installed. The rubber dries and hardens with age and UV exposure, and wind… Repairs typically run $25-$1,200. Severity: low.