P0706 on 2015 Chrysler 200 — Transmission Range Sensor Circuit Range/Performance
1 vehicles · 1 makes
How to diagnose and fix P0706: most-reported vehicles
Ranked by owner reports. Each card gives the symptoms, how to confirm the cause, the fix, parts and sources for that vehicle.
Chrysler 200 · 2015–2015
Early second-generation 200 sedans with the ZF-sourced 9-speed automatic (948TE/9HP48) can unexpectedly drop into neutral while driving, causing a sudden loss of propulsion. The root cause is insufficient crimps on the terminals of the 26-way connector in the transmission range-sensor wire harness, which corrupts the transmission's gear-position signal. This triggered NHTSA recall 16V-529 covering the 2015 Chrysler 200 alongside related Jeep Cherokee, Renegade, RAM ProMaster City, and Fiat 500X models sharing the transmission.
Common Symptoms
- Transmission suddenly shifts to neutral while driving
- Sudden loss of power/propulsion
- Loss of drive at speed
- Warning lights or limp mode
How to Fix
Under recall S55 / NHTSA 16V-529, dealers reprogram the Powertrain Control Module and Transmission Control Module and, if needed, replace the transaxle range-sensor wire harness free of charge. Owners should verify the recall has been completed via VIN at nhtsa.gov; out of warranty, harness/valve-body repairs typically run several hundred to over a thousand dollars.
Find a Chrysler dealer
Choose to share your location for this search, or enter an area below. Your search location is sent to Google to find dealers.
Open Chrysler dealer map in Google Maps ↗Call to confirm they service Chrysler vehicles and check your VIN, recall eligibility, parts availability, and appointment options.
Sources for this issue (1)
Find P0706 by make
Browse every documented model and issue for your make.
P0706 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does P0706 mean?
P0706 stands for "Transmission Range Sensor Circuit Range/Performance." Set when the transmission range (PRNDL) sensor signal is present but outside the expected range or does not correlate with other inputs (such as actual gear engaged). The position reading is implausible relative to vehicle operation.
What are the most common causes of P0706?
The most common causes of P0706 are: Misadjusted or worn transmission range sensor, Failing range sensor, Wiring resistance or intermittent connection, Shift linkage adjustment fault, Internal transmission selector wear. The specific cause varies by vehicle.
How much does it cost to fix P0706?
Repair costs vary widely depending on the root cause and vehicle.
Which vehicles are affected by P0706?
Au7o has documented P0706 across 1 vehicle models from 1 manufacturers: Chrysler.
Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.