P0765 on Dodge: How to Diagnose & Fix
Shift Solenoid 'D'
1 Dodge model · 1 documented issue · $300-$3,500 repair
P0765 on Dodge by model: symptoms, diagnosis and fix
The 42RLE 4-speed automatic in V6 Chargers suffers from solenoid failures and corrosion in the 10-pin solenoid harness connector. Causes slipping, harsh shifts, limp mode, and P0750/P0755/P0760/P0765 codes. Cup plug for park pawl anchor shaft can fail (recall).
Common Symptoms
- Slipping gears
- Harsh shifts
- Transmission stuck in limp mode
- P0750/P0755/P0760/P0765 codes
- Speed limited to 40 mph in limp mode
How to Fix
Install new design 42RLE 10-pin connector (dealer wiring repair). Replace solenoid pack. Verify park pawl recall completed. Use ONLY Mopar ATF+4 (68218058AC).
Sources for this issue (1)
P0765 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does P0765 mean on a Dodge?
P0765 stands for "Shift Solenoid 'D'." Set when the PCM/TCM detects a general malfunction in shift solenoid 'D' circuit. A 'D' solenoid fault disrupts the gear shift it controls. On Dodge it is documented across 1 model: Charger.
What are the most common causes of P0765?
The most common causes of P0765 are: Faulty shift solenoid 'D', Open or shorted solenoid wiring, Low or contaminated transmission fluid, Corroded connector, Valve body fault. The specific cause varies by vehicle.
How much does it cost to fix P0765 on a Dodge?
Published repair estimates on Dodge range from $300 to $3,500 depending on the model and root cause. If an issue mentions a recall or campaign, check your VIN with the manufacturer or NHTSA and confirm eligibility and coverage with a dealer.
Looking for P0765 on a different make?
View P0765 across all makes →Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.