Au7o mascotAu7o
Known IssuesTest Hub demo
  1. Au7o
  2. /
  3. Known Issues
  4. /
  5. Hyundai
  6. /
  7. Entourage
Hyundai · Known Issues

2008 Hyundai Entourage Problems: 4 Known Issues

2008 model year · 335+ owner reports · Updated September 2026

Share:@au7o.io

2008 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example
Known IssuesMotorcycle IssuesDTC LookupDrivePricingAboutTermsPrivacyCookiesConsentData rightsCopyrightFeedback
Share:@au7o.io

Vehicle data and repair guidance on this site are compiled with AI assistance and may contain errors. Always verify with your service manual or a qualified mechanic.

Data protection representation

DataRep representative in the United KingdomDataRep representative in the European Union
Au7o · 2026
Built for DIY mechanics. Privacy-first.
Explore free Hub demo
Issue summary

According to Au7o's analysis of 335+ owner reports, the 2008 Hyundai Entourage has 4 documented known issues, with 2 rated critical. The most serious are 3.8L Lambda V6 Engine Knock and Connecting Rod Bearing Failure ($0-$6,000 repair) and Crankshaft Position Sensor Failure Causing Stalling ($100-$250 repair). The most commonly reported issue is Power Sliding Door Cable Failure and Motor Burnout with 135 owner reports. Across all issues with published estimates, repair costs range from $100 to $6,000. DIY maintenance guides at au7o.io.

In This Article

  • Entourage Engine2
  • Entourage Body/Panels1
  • Entourage Electrical1
  • Recalls6
  • FAQ
Get Started
Back to top

In This Article

  • Engine2
  • Body/Panels1
  • Electrical1
  • Recalls6
  • FAQ

All 4 Known Issues

Filter:
ALL YEARS200920082007
Community reported
90 owners

On the 2007-2009 Hyundai Entourage 3.8L Lambda V6, the 3.8L Lambda V6 in the Entourage is affected by the same connecting rod bearing failure issue that plagued early Lambda engines across the Hyundai/Kia lineup. Manufacturing debris left in the oil passages can restrict oil flow to the connecting rod bearings, causing premature bearing wear and eventual rod knock. Hyundai extended the engine warranty to 15 years/200,000 miles under a settlement. The issue typically manifests between 80,000-150,000 miles with a knocking noise from the lower engine.

This issue also affects: Kia Cadenza, Hyundai Veracruz

Common Symptoms

  • Knocking or tapping noise from lower engine
  • Noise worsens with engine speed
  • Oil pressure warning light illuminated
  • Metal shavings in oil during oil change
  • Engine seizure (advanced failure)

How to Fix

If the engine is knocking, it requires a replacement engine. Check with a Hyundai dealer for coverage under the extended engine warranty (15 years/200,000 miles). Hyundai will perform an oil consumption test and bearing inspection. Keep all oil change records — they are required for warranty claims. If covered, Hyundai replaces the engine with a remanufactured unit at no cost.

Owner tips & cautions

  • TipContact your Hyundai dealer about the extended engine warranty (15 years/200,000 miles) — engine replacement is covered at no cost for affected vehicles
  • TipKeep ALL oil change receipts — Hyundai requires proof of regular maintenance for warranty engine replacement
  • WarningStop driving immediately if you hear engine knocking — continued driving with bearing failure causes catastrophic rod through the block, voiding the warranty
Typical repair cost:$0 - $6,000

Research This Issue

Based on 90 owner reports

GoogleRedditYouTubeNHTSA
Community Reported
Low Confidence90 owner reportsLast reported by owners Mar 2026Reviewed Mar 2026

On the 2007-2009 Hyundai Entourage 3.8L V6, the 3.8L V6 crankshaft position sensor fails intermittently, causing random stalling, no-start conditions, and rough running. Heat soak worsens the problem — engine stalls after reaching operating temperature then restarts after cooling.

This issue also affects: Kia Amanti, Kia Forte, Kia Optima

Common Symptoms

  • Random stalling while driving
  • No-start when hot
  • Engine restarts after cooling down
  • Check engine light
  • Rough idle

How to Fix

Replace crankshaft position sensor. Use OEM or quality aftermarket sensor. Check wiring connector for corrosion or loose pins. Clear stored DTCs after replacement.

What you need to fix it

Only diagnosis- and fitment-reviewed repair parts are linked here.

  • Walker Products 235-1353 crankshaft position sensor
    OEMWalker Products 235-1353

    Confirm VIN, connector and sensor position; 2009 is not approved.

    eBay
  • Genuine Hyundai 39310-3C100 crankshaft position sensor
    OEMHyundai 39310-3C100

    Confirm VIN and connector; 2009 is not approved.

    HyundaiPartsDeal

As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

Typical repair cost:$100 - $250

Research This Issue

GoogleRedditYouTubeNHTSA
Community Reported
Medium Confidence
Community reported
135 owners

On the 2007-2009 Hyundai Entourage, the Entourage (a rebadged Kia Sedona) experiences frequent power sliding door failures. The steel cable that operates the door frays and snaps, or the electric motor that drives the cable burns out. When the cable breaks, the door may not open or close properly and can get stuck partially open. The door can also reverse direction mid-cycle due to the pinch sensor being overly sensitive or misaligned. This is a known issue affecting the Entourage from the first model year.

Common Symptoms

  • Sliding door stops mid-travel or reverses direction
  • Grinding or scraping noise during door operation
  • Door won't open or close with power switch
  • Door gets stuck partially open
  • Power sliding door warning chime with no apparent obstruction

How to Fix

Replace the power sliding door cable assembly (Hyundai 81481-4D001 for left, 81471-4D001 for right). If the motor has burned out, the entire actuator assembly must be replaced. Lubricate the door track and rollers with silicone spray every 6 months to reduce cable strain. If repairs become too frequent, the power function can be disabled and the door operated manually by disconnecting the actuator.

Owner tips & cautions

  • TipLubricate the sliding door track rollers and cable pulleys with silicone spray every 6 months — this dramatically extends cable life by reducing friction
  • TipIf the power function fails frequently, disconnect the actuator and use the door manually — it operates smoothly as a manual sliding door
  • WarningKeep children's hands away from the sliding door track — a failing cable can cause the door to move unexpectedly
Typical repair cost:$200 - $800

Research This Issue

Based on 135 owner reports

GoogleRedditYouTubeNHTSA
Community Reported
Low Confidence135 owner reportsLast reported by owners Mar 2026Reviewed Mar 2026
Community reported
110 owners

On the 2007-2009 Hyundai Entourage 3.8L Lambda V6, the Entourage 3.8L V6 shares the same high alternator failure rate as other Lambda V6 Hyundai vehicles. The alternator fails prematurely between 60,000-80,000 miles. Additionally, the Entourage suffers from parasitic battery drain caused by the power sliding door modules not fully entering sleep mode. This drains the battery overnight if the vehicle sits for more than 2-3 days. The combination of alternator weakness and parasitic drain frequently results in dead batteries and stranded owners.

This issue also affects: Kia Carnival, Kia EV9, Kia Sportage

Common Symptoms

  • Dead battery after sitting 2-3 days
  • Battery light on dashboard while driving
  • Slow engine cranking
  • Multiple jump starts needed per month
  • Electrical accessories (radio, lights) dimming

How to Fix

Replace the alternator with a quality remanufactured unit. For parasitic drain, have a mechanic perform a current draw test with a multimeter to identify the offending circuit. The sliding door control module is the most common culprit — unplugging it overnight as a test confirms this. Hyundai released a software update for the body control module that addresses the sleep mode issue. Disconnect the battery negative terminal if the vehicle will sit for more than 3 days.

What you need to fix it

Only diagnosis- and fitment-reviewed repair parts are linked here.

  • Denso 210-0711 remanufactured 130-amp alternator
    OEMDenso 210-0711

    alternator replacement only after charging-output, ripple and voltage-drop tests confirm alternator failure Fitment/availability: 2007-2008 Hyundai Entourage 3.8L without rear DVD/rear entertainment, 130-amp configuration. Confirm VIN, o…

    eBay

As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

Owner tips & cautions

  • TipAsk the dealer about a body control module software update — Hyundai released a reflash that fixes the parasitic drain from the sliding door modules
  • TipIf the van sits for more than 3 days, disconnect the negative battery terminal or install a battery disconnect switch ($15 from Amazon)
Typical repair cost:$200 - $700

Research This Issue

Based on 110 owner reports

GoogleRedditYouTubeNHTSA
Community Reported
Low Confidence110 owner reportsLast reported by owners Mar 2026Reviewed Mar 2026
NHTSA Recalls6 recalls

SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

Hyundai Motor America (Hyundai) is recalling certain 2007-2010 Elantra and 2009-2011 Elantra Touring vehicles. On February 21, 2020 Hyundai expanded the recall to include 46,425 model year 2007-2008 Entourage and 2007 Santa Fe vehicles. Moisture may enter the Anti-lock Brake (ABS) Module and result in an electrical short.

Campaign #20V06100004/02/2020

EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

HYUNDAI IS RECALLING 532,633 MY 2006-2007 ACCENT, ENTOURAGE, SONATA, MY 2007 AZERA, ELANTRA AND SANTA FE, MY 2005-2007 TUCSON AND MY 2007-2008 VERACRUZ VEHICLES. THE STOP LAMP SWITCH IN THE AFFECTED VEHICLES MAY MALFUNCTION. A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED. A STOP LAMP SWITCH MALFUNCTION MAY ALSO AFFECT THE OPERATION OF THE BRAKE-TRANSMISSION SHIFT INTERLOCK FEATURE SO THE TRANSMISSION SHIFTER WOULD NOT BE ABLE TO BE SHIFTED OUT OF THE PARK POSITION. IT MAY ALSO CAUSE THE ELECTRONIC STABILITY CONTROL (ESC) MALFUNCTION LIGHT TO ILLUMINATE, AND IT MAY NOT DEACTIVATE THE CRUISE CONTROL WHEN THE BRAKE PEDAL IS DEPRESSED.

Campaign #09V12200015/04/2009
🔧
A mechanic who knows YOUR exact car
Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
Get ahead of Hyundai Entourage problems — free
Leave your email and we'll alert you the moment there's a new recall or known issue for your Hyundai Entourage. Free, no account needed.

Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.

Other Hyundai Models

Hyundai Elantra42Hyundai Sonata31Hyundai Tucson23Hyundai Veloster22Hyundai Palisade19Hyundai Santa Cruz17

Frequently Asked Questions

What are the most common Hyundai Entourage problems?

According to Au7o's analysis of 335+ owner reports, the 2008 Hyundai Entourage has 4 documented issues. The most frequently reported are: 3.8L Lambda V6 Engine Knock and Connecting Rod Bearing Failure, Crankshaft Position Sensor Failure Causing Stalling, Power Sliding Door Cable Failure and Motor Burnout. Of these, 2 are rated critical and should be addressed promptly.

Is the Hyundai Entourage reliable?

The 2008 Hyundai Entourage has 4 known issues documented across 335+ owner reports. 2 issues are rated critical: 3.8L Lambda V6 Engine Knock and Connecting Rod Bearing Failure and Crankshaft Position Sensor Failure Causing Stalling. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

How much does it cost to fix common Hyundai Entourage problems?

Repair costs for known Hyundai Entourage issues range from $0 to $6,000, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, 3.8L Lambda V6 Engine Knock and Connecting Rod Bearing Failure, typically costs $0-$6,000 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

What is the 2007-2009 Hyundai Entourage 3.8L Lambda V6 Engine Knock and Connecting Rod Bearing Failure?

The 3.8L Lambda V6 in the Entourage is affected by the same connecting rod bearing failure issue that plagued early Lambda engines across the Hyundai/Kia lineup. Manufacturing debris left in the oil passages can restrict oil flow to the connecting rod bearings, causing premature… Repairs typically run $0-$6,000. Severity: high.

What is the 2007-2009 Hyundai Entourage Crankshaft Position Sensor Failure Causing Stalling?

The 3.8L V6 crankshaft position sensor fails intermittently, causing random stalling, no-start conditions, and rough running. Heat soak worsens the problem — engine stalls after reaching operating temperature then restarts after cooling. Repairs typically run $100-$250. Severity: high.

Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.

Data sourced from 335+ owner reports, NHTSA recalls, TSBs, and automotive forums.

LATCHES/LOCKS/LINKAGES:HOOD:LATCH

Hyundai Motor America (Hyundai) is recalling certain model year 2007-2008 Entourage vehicles manufactured February 16, 2006, to June 30, 2008. In the affected vehicles, the secondary hood latch may corrode and bind and remain in the unlatched position when the hood is closed.

Campaign #16V84300021/11/2016

SUSPENSION:FRONT:CONTROL ARM:LOWER ARM

Hyundai America Technical Center, Inc. (Hyundai) is recalling certain model year 2007-2008 Hyundai Entourage vehicles manufactured from February 16, 2006, through June 30, 2008 and sold in, or currently registered in, Massachusetts, Maryland, Michigan, New Hampshire, New York, Pennsylvania, Vermont, Wisconsin, Connecticut, Delaware, Iowa, Illinois, Indiana, Maine, Minnesota, Missouri, New Jersey, Ohio, Rhode Island, West Virginia and the District of Columbia. In the affected vehicles, the front lower control arms may fracture due to corrosion resulting from exposure to road salt and water.

Campaign #13V55600006/11/2013

EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate.

Campaign #13V11300001/04/2013

+ 1 more recalls. Check all on NHTSA.gov

Enter your VIN at NHTSA.gov to check recalls specific to your vehicle.

What is the 2007-2009 Hyundai Entourage Power Sliding Door Cable Failure and Motor Burnout?

The Entourage (a rebadged Kia Sedona) experiences frequent power sliding door failures. The steel cable that operates the door frays and snaps, or the electric motor that drives the cable burns out. When the cable breaks, the door may not open or close properly and can get stuck… Repairs typically run $200-$800. Severity: medium.

What is the 2007-2009 Hyundai Entourage 3.8L V6 Alternator and Battery Drain Issues?

The Entourage 3.8L V6 shares the same high alternator failure rate as other Lambda V6 Hyundai vehicles. The alternator fails prematurely between 60,000-80,000 miles. Additionally, the Entourage suffers from parasitic battery drain caused by the power sliding door modules not full… Repairs typically run $200-$700. Severity: medium.