Au7o mascotAu7o
Known IssuesTest Hub demo
  1. Au7o
  2. /
  3. Known Issues
  4. /
  5. Mazda
  6. /
  7. CX-5
Mazda · Known Issues

2015 Mazda CX-5 Problems: 16 Known Issues

2015 model year · 9,220+ owner reports · Updated September 2026

Share:@au7o.io

2015 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

Known IssuesMotorcycle IssuesDTC LookupDrivePricingAboutTermsPrivacyCookiesConsentData rightsCopyrightFeedback
Share:@au7o.io

Vehicle data and repair guidance on this site are compiled with AI assistance and may contain errors. Always verify with your service manual or a qualified mechanic.

Data protection representation

DataRep representative in the United KingdomDataRep representative in the European Union
Au7o · 2026
Built for DIY mechanics. Privacy-first.
Explore free Hub demo
No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example
Issue summary

According to Au7o's analysis of 9,220+ owner reports, the 2015 Mazda CX-5 has 16 documented known issues, with 3 rated critical. The most serious are Sticking Brake Calipers and Premature Wear, SKYACTIV-D 2.2 Intake Shutter Valve and EGR Carbon Deposit Buildup (Diesel Recall) ($0-$1,500 repair) and SKYACTIV-D 2.2 Diesel Engine Oil Dilution from Interrupted DPF Regeneration ($120-$4,500 repair). The most commonly reported issue is Carbon Buildup on Intake Valves (Skyactiv) with 2,100 owner reports. Across all issues with published estimates, repair costs range from $100 to $4,500. DIY maintenance guides at au7o.io.

In This Article

  • CX-5 Engine4
  • CX-5 Brakes1
  • CX-5 Emissions1
  • CX-5 Suspension2
  • CX-5 Body/Panels2
  • CX-5 Electrical1
  • CX-5 Cooling1
  • CX-5 Transmission1
  • CX-5 Drivetrain1
  • CX-5 Safety/Recalls1
  • CX-5 Exterior1
  • Recalls2
  • FAQ
Get Started
Back to top

In This Article

  • Engine4
  • Brakes1
  • Emissions1
  • Suspension2
Body/Panels
2
  • Electrical1
  • Cooling1
  • Transmission1
  • Drivetrain1
  • Safety/Recalls1
  • Exterior1
  • Recalls2
  • FAQ
  • All 16 Known Issues

    Filter:
    ALL YEARS2025202420232022202120202019201820172016201520142013

    When Issues Typically Appear

    Carbon Buildup on Intake Valves (Skyactiv)
    5K-10K
    Premature Wheel Bearing Failure
    11K-36K
    Sticking Brake Calipers and Premature Wear
    12K-40K
    013K25K38K50K mi

    On the 2013-2021 Mazda CX-5 SKYACTIV-D 2.2 (SH / SH-VPTS), the 2.2 SKYACTIV-D uses post-injection of diesel into the cylinder to raise exhaust temperature for diesel particulate filter regeneration. Fuel that is not burned washes past the rings into the sump. If the engine is shut off mid-regeneration - the normal outcome of short urban trips - the cycle never completes, regenerations retry more frequently, and each attempt adds more fuel to the oil. Owners report the dipstick rising well above the maximum mark and sump levels reaching the X/overfill mark in as little as 6,000 km, with some engines regenerating every 240-400 km. Diluted oil loses viscosity and can trigger low oil pressure warnings; in the worst cases dilution feeds a runaway condition. This is specific to the Denso-ECU SKYACTIV-D and is not a SKYACTIV-G gasoline failure - the diesel was widely sold in Europe and Australia and only briefly offered in the US.

    Common Symptoms

    • Engine oil level rising above the MAX mark on the dipstick
    • Strong diesel smell in the engine oil
    • Low oil pressure warning light
    • Very frequent DPF regeneration cycles (every 200-400 km)
    • Elevated idle speed and cooling fan running after stopping
    • Loss of power / limp mode with DPF warning

    How to Fix

    There is no universal free remedy in most markets, though Mazda has released PCM calibration updates that alter the regeneration strategy - ask your dealer whether an updated diesel PCM calibration applies to your VIN. Operationally: never shut the engine off during an active regeneration (watch for elevated idle, cooling fan running, no auto stop, instant fuel economy collapse), give the car a sustained highway run regularly, use high-detergent branded diesel, and check the oil level at every fill. Treat a dipstick above MAX as a fault, not an overfill - change the oil immediately with the correct low-SAPS spec. Repeatedly ignoring rising oil level risks bearing damage or an uncontrolled overspeed event.

    Typical repair cost:$120 - $4,500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026
    Community reported
    2,100 owners

    On the 2013-2023 Mazda CX-5, direct-injection Skyactiv engines accumulate carbon deposits on intake valves due to oil vapors from the PCV system. Without port injection to clean valves, carbon can fuse to valve surfaces over time, typically appearing around 65,000+ miles.

    Common Symptoms

    • Rough idle and engine misfires
    • Reduced power and poor fuel economy
    • Check engine light with misfire codes
    • Symptoms typically appear around 65,000+ miles

    How to Fix

    Walnut blasting intake valves to remove carbon deposits. Preventive maintenance using fuel additives (Techron, Sea Foam, Lucas) every 5,000-10,000 miles can help reduce buildup.

    Owner tips & cautions

    • TipWalnut blasting every 60,000-80,000 miles as preventive maintenance

    Research This Issue

    Based on 2,100 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified2,100 owner reportsLast reported by owners Dec 2023Reviewed Feb 2026
    Community reported
    740 owners

    On the 2013-2018 Mazda CX-5, mAF sensor becomes contaminated with dirt or suffers water damage, providing incorrect air intake readings. Causes vehicle to enter "limp mode" with severe performance degradation.

    Common Symptoms

    • Loss of power, vehicle enters limp mode
    • Engine hesitation and jerky acceleration
    • Check engine light with codes P0100-P0104
    • Erratic idling and misfires
    • Vehicle may stall and not restart

    How to Fix

    Clean MAF sensor with CRC MAF cleaner (#05110) or replace sensor. Do not use brake cleaner or carburetor cleaner as they can damage the sensor.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • CRC 05110 Mass Air Flow Sensor Cleaner, 11-ounce aerosol
      OEMCRC 05110

      Clean a contaminated MAF sensing element after diagnosis Fitment/availability: Live direct product page identifies CRC 05110 MAF cleaner. Use only on a removed MAF according to the label, never substitute brake/carburetor cleaner, never …

      AutoZone
    • Genuine Mazda PE01-13-215 mass air flow sensor
      OEMMazda PE01-13-215

      Confirm VIN and installed sensor number because the dealer catalog also co

      MazdaPartsNow

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Owner tips & cautions

    • TipTry cleaning first with proper MAF cleaner before replacing
    • TipEnsure air filter is clean - dirty filter damages MAF
    • WarningDo not over-oil K&N filters (oil contaminates MAF)
    • TipDisconnect battery after cleaning to reset ECU

    Research This Issue

    Based on 740 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified740 owner reportsLast reported by owners Jul 2023Reviewed Feb 2026
    Community reported
    430 owners

    On the 2013-2016 Mazda CX-5, exhaust manifold gasket becomes deformed from impact (speed bumps, road debris), causing exhaust leaks. Can also develop manifold cracks over time from heat cycling.

    Common Symptoms

    • Ticking or hissing noise from engine bay
    • Smell of exhaust fumes in cabin or outside
    • Check engine light with oxygen sensor codes
    • Reduced engine performance

    How to Fix

    Replace exhaust manifold gasket or full manifold if cracked. Use high-quality gasket material rated for high heat.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Genuine Mazda PE17-13-460 exhaust-manifold gasket
      OEMMazda PE17-13-460

      Reseal a confirmed manifold-to-head leak on the 2013-2016 CX-5 2.0L PE-engine branch Fitment/availability: Live direct page identifies PE17-13-460, ships in 1-2 business days and Add to Cart. Mazda service information assigns PE17/PEB4 t…

      MazdaPartsNow
    • Genuine Mazda PY01-13-460 exhaust-manifold gasket
      OEMMazda PY01-13-460

      Reseal a confirmed manifold-to-head leak on the 2014-2016 CX-5 2.5L PY-engine branch Fitment/availability: Live direct page identifies PY01-13-460 for CX-5 2.5L applications, ships in 1-2 business days and Add to Cart. Mazda service info…

      MazdaPartsNow

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Owner tips & cautions

    • WarningAvoid aggressive speed bump approaches
    • TipApply anti-seize to manifold bolts during installation
    • TipTorque manifold bolts to proper spec in correct sequence
    • TipInspect for cracks when replacing gasket

    Research This Issue

    Based on 430 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified430 owner reportsLast reported by owners Nov 2022Reviewed Feb 2026
    Community reported
    980 owners

    On the 2013-2019 Mazda CX-5, rear brake calipers and electronic parking brake (EPB) stick or seize due to moisture accumulation in caliper brackets. This causes uneven brake pad wear, overheating, and premature failure, often before 40,000 miles.

    Common Symptoms

    • Rear brake pads/rotors worn before 40,000 miles
    • Grinding noise from rear brakes
    • Emergency parking brake seizure
    • Vehicle pulling to one side when braking
    • Brake overheating smell

    How to Fix

    Replace calipers, rotors, and pads. Clean and lubricate caliper brackets during routine brake service to prevent recurrence.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • CRC 05361 Silaramic brake-system grease, 5-ounce tube
      OEMCRC 05361

      Lubricate approved caliper slide and metal contact points during a correctly scoped brake service Fitment/availability: Live direct product page identifies CRC 05361 for brake-system component lubrication with Add to Cart. Apply only whe…

      NAPA

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Owner tips & cautions

    • TipInspect and lubricate caliper slide pins at every brake service
    • TipApply anti-seize to caliper bracket contact points
    • TipFlush brake fluid every 2 years to prevent moisture buildup

    Research This Issue

    Based on 980 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified980 owner reportsLast reported by owners Sep 2023Reviewed Feb 2026

    On the 2013-2018 Mazda CX-5 SKYACTIV-D 2.2 (SH / SH-VPTS), the 2.2 SKYACTIV-D runs two EGR valves and recirculates exhaust gas aggressively to meet emissions targets. Soot from that recirculated gas bakes onto the intake shutter valve, the intake manifold runners and the EGR passages; owners have found manifolds and EGR valves 80 percent blocked. Once the shutter valve sticks, airflow control is lost - power falls off progressively, multiple dash warnings appear, and the engine can stall with no restart. Mazda Australia recalled 35,476 diesel Mazda3 (2014-2016), Mazda6 (2012-2018) and CX-5 (2012-2018) vehicles specifically over carbon deposits in the intake shutter valve causing premature wear of engine components, with stated symptoms including increased stopping distance and smoke from the engine bay. The clogged manifold also buries the MAP sensor port, which is the near-universal cause of P0106 on this engine.

    Common Symptoms

    • Gradual loss of engine power
    • Multiple warning lights on the dashboard
    • Engine stalls and will not restart
    • Smoke from the engine compartment
    • Increased braking distance
    • Rough idle and hesitation under load

    How to Fix

    Check whether your VIN falls under the diesel carbon-deposit campaign in your market - in Australia the remedy was performed free of charge. Otherwise the repair is mechanical: remove and chemically clean or replace the intake shutter valve, decarbon the intake manifold and EGR valves and cooler, and clean or replace the MAP sensor. Updated ECU calibration reduces recurrence. Prevention is driving pattern - the engine needs regular sustained hot running, not exclusively short urban trips. A P0106 with no other fault on this engine almost always means a soot-blocked MAP port, not a failed sensor.

    Typical repair cost:$0 - $1,500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Aug 2026
    Community reported
    890 owners

    On the 2013-2022 Mazda CX-5, wheel bearings fail prematurely due to impact damage (potholes, curbs), contamination from water/salt/grit, or manufacturing defects. Common issue across all model years.

    Common Symptoms

    • Growling or humming noise that increases with speed
    • Vibration in steering wheel or vehicle body
    • Vehicle pulling to one side
    • Loose or sloppy steering feel
    • Uneven tire wear

    How to Fix

    Replace wheel bearing hub assembly. Should be covered under warranty if caught early (within 36,000 miles).

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Genuine Mazda KD35-33-04XJ front wheel hub and bearing
      OEMMazda KD35-33-04XJ

      Replace a confirmed failed front hub on the VIN-matched CX-5 branch Fitment/availability: Live direct OEM page identifies KD35-33-04XJ, lists 2013-2025 Mazda applications, ships in 1-2 business days and Add to Cart.

      MazdaPartsNow
    • Genuine Mazda KD31-26-15XB rear FWD hub and bearing
      OEMMazda KD31-26-15XB

      Replace a confirmed failed rear hub on 2013-2021 CX-5 FWD applications Fitment/availability: Live direct OEM page identifies KD31-26-15XB as a rear wheel hub, lists 2013-2021 CX-5 fitment, ships in 1-2 business days and Add to Cart. OEM …

      MazdaPartsNow
    • Genuine Mazda KD35-26-15XD rear AWD hub and bearing
      OEMMazda KD35-26-15XD

      Replace a confirmed failed rear hub on CX-5 AWD applications Fitment/availability: Live direct OEM page identifies KD35-26-15XD as the CX-5 rear wheel hub, ships in 1-2 business days and Add to Cart. OEM catalog evidence scopes the branc…

      MazdaPartsNow

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Owner tips & cautions

    • TipGet diagnosed early - covered under warranty if within 36k miles
    • TipReplace both front or both rear bearings together
    • TipInspect CV axle seals during replacement
    • WarningAvoid deep water/puddles to prevent bearing contamination

    Research This Issue

    Based on 890 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified890 owner reportsLast reported by owners Dec 2023Reviewed Feb 2026
    Community reported
    1,560 owners

    On the 2013-2020 Mazda CX-5, clunking, knocking, or rattling from front suspension caused by dry strut mount bearings, loose sway bar links, worn ball joints, or loose crossbar/cowl bolts.

    Common Symptoms

    • Clunking noise over bumps or sharp turns
    • Rattling from front end
    • Noise increases with road irregularities
    • May feel vibration through steering wheel

    How to Fix

    Grease strut mount bearings, tighten crossbar/cowl bolts to proper torque, replace sway bar links or worn suspension components as needed.

    Owner tips & cautions

    • TipGrease strut mount bearings with lithium grease every 30,000 miles
    • TipTorque crossbar bolts to 15 ft-lbs (common looseness)
    • TipInspect sway bar links and bushings regularly

    Research This Issue

    Based on 1,560 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified1,560 owner reportsLast reported by owners Jun 2023Reviewed Feb 2026

    On the 2013-2016 Mazda CX-5, insufficient corrosion-protective coating was applied to the ends of the external cylinders of the rear hatch/liftgate gas stay dampers on first-generation KE CX-5 vehicles built December 15, 2011 through December 26, 2015. Water carrying road salt enters the exposed cylinder end and corrodes it; over time the corroded strut can fracture as the liftgate is being opened. The hatch then drops suddenly onto whoever is standing under it, and broken strut fragments can be thrown. Roughly 575,000 U.S. vehicles were covered across CX-5, CX-3, Mazda3 and Mazda5, making it one of the largest Mazda campaigns of the decade. Owners in the salt belt reported failures well before the recall notice arrived, and parts were initially unavailable when the campaign opened in April 2017.

    Common Symptoms

    • Liftgate will not stay open and falls on its own
    • Liftgate drops suddenly while loading cargo
    • Visible rust or pitting on the shiny strut cylinder
    • Liftgate feels heavy or requires holding up by hand
    • Popping or snapping sound when opening the hatch

    How to Fix

    Free recall remedy. NHTSA campaign 16V644000, Mazda internal recall 9916H: dealers replace both liftgate gas stay dampers at no charge. If the vehicle is outside the campaign or the struts were already replaced with uncoated aftermarket units, replace both struts as a pair and inspect the cylinder ends for pitting at each oil change in salt-belt states. Never work under a liftgate that no longer holds itself open.

    Typical repair cost:$0 - $180

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2013-2021 Mazda CX-5, on sunroof-equipped CX-5s the front sunroof drain hoses work loose from their drain-tray nipples behind the A-pillar trim, or the tubes clog with organic debris. Because nothing visibly leaks at the headliner, water tracks down inside the pillar and body cavity and pools under the carpet - most often in the rear passenger footwell, the lowest point of the floor pan - so owners discover the problem as a soaked carpet or a persistent musty smell long after the leak started. Sustained wetting under the carpet corrodes floor-mounted connectors and modules and drives mildew growth. The failure is reported across both KE and KF generations, from 2012-2013 cars through 2018 and later.

    Common Symptoms

    • Wet carpet in the rear passenger footwell
    • Driver or passenger side floor soaked after rain
    • Musty or mildew smell inside the cabin
    • Water dripping from the A-pillar or headliner edge
    • Fogged windows that will not clear
    • Electrical faults after heavy rain

    How to Fix

    Test each drain by pouring water into the front sunroof corner troughs and watching for discharge below the vehicle. If it pools, the tube is clogged - clear it from the exit end with trimmer line or low-pressure compressed air rather than forcing a stiff snake down from the top, which can pop the tube off. If it drains but the interior is still wet, pull the A-pillar trim and reseat the hose on the tray nipple; many owners secure it with a small clamp or zip tie. Clean the sunroof rubber seal as part of the repair, pull and dry the carpet and jute padding fully, and inspect any under-carpet connectors for corrosion.

    Typical repair cost:$100 - $600

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Low ConfidenceVerifiedReviewed Aug 2026
    Community reported
    1,850 owners

    On the 2014-2021 Mazda CX-5, the Connectivity Master Unit (CMU) fails, causing the infotainment screen to go black, flicker, freeze, or loop repeatedly. Often caused by corrupted firmware, faulty Nav SD card contacts, or failing internal memory.

    Common Symptoms

    • Black or blank infotainment screen
    • System freezing or rebooting continuously
    • Loss of backup camera, navigation, audio controls
    • Screen flickering or looping

    How to Fix

    Try system reset (hold nav + mute while in reverse), battery disconnect for 10 minutes, or firmware update. If unsuccessful, CMU replacement required.

    Owner tips & cautions

    • TipTry hard reset: Hold nav + mute + back buttons while in reverse
    • TipDisconnect battery for 10+ minutes to reset CMU
    • TipCheck Nav SD card contacts for corrosion
    • TipUpdate firmware at dealer before replacing CMU

    Research This Issue

    Based on 1,850 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified1,850 owner reportsLast reported by owners Nov 2023Reviewed Feb 2026
    Community reported
    670 owners

    On the 2013-2019 Mazda CX-5, aC compressor fails due to leaky seals, inadequate lubrication, or stress from system clogs/moisture. Common failure point for aging CX-5s, particularly in hot climates.

    Common Symptoms

    • No cold air from AC system
    • Unusual grinding or squealing noises from compressor
    • AC clutch not engaging when AC is turned on
    • Visible refrigerant leaks under vehicle

    How to Fix

    Replace AC compressor, orifice tube, and receiver dryer (required when replacing compressor). Evacuate and recharge system with proper refrigerant amount.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Genuine Mazda KD45-61-450A A/C compressor with clutch
      OEMMazda KD45-61-450A

      Replace a confirmed failed compressor on the 2.0L/2.5L naturally aspirated branch Fitment/availability: Indexed direct dealer page identifies KD45-61-450A for CX-5 naturally aspirated SKYACTIV applications, clutch included, with price/Ad…

      Mazda Wholesale Direct
    • Genuine Mazda BFD1-61-450A A/C compressor with clutch
      OEMMazda BFD1-61-450A

      Replace a confirmed failed compressor on the 2019 CX-5 2.5 Turbo branch Fitment/availability: Indexed direct dealer page identifies BFD1-61-450A for CX-5 2.5L turbo, clutch coil included, with sale price/Add to Cart. This is not intercha…

      AutoNation Parts
    • API 119543-02756211 A/C receiver-drier
      OEMAPI 119543-02756211

      Confirm the drier configuration against the selected condenser/compressor branch and repl

      PartsGeek
    • Genuine Mazda KF03-61-J14 A/C expansion valve
      OEMMazda KF03-61-J14

      Confirm VIN/HVAC equipm

      MazdaPartsNow

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Owner tips & cautions

    • TipReplace cabin air filter annually to reduce system strain
    • TipFlush AC system when replacing compressor

    Research This Issue

    Based on 670 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified670 owner reportsLast reported by owners May 2023Reviewed Feb 2026

    On the 2013-2022 Mazda CX-5, the six-speed FW6A-EL automatic in the CX-5 locks its torque converter clutch very early and holds it locked across a wide range to chase fuel economy. That aggressive lock-up strategy wears the lock-up clutch lining, and the resulting iron powder contaminates the ATF. Owners report a distinct shudder or judder - like driving over rumble strips - most often felt after an upshift, under light throttle on an incline, or in third gear and above, typically emerging around 80,000 to 100,000 miles. On 2018 and later 2.5L cars with cylinder deactivation, the deactivation event introduces its own driveline vibration that both aggravates and masks the shudder, so the two get confused during diagnosis. Mazda's current dealer-level repair is a torque converter replacement rather than a full transaxle exchange, though earlier cases were resolved with complete transmission replacements under warranty.

    Common Symptoms

    • Rumble-strip shudder at steady light throttle
    • Vibration after upshifts, especially climbing a grade
    • Judder felt in 3rd gear and higher
    • Shudder disappears when you touch the throttle or brake
    • Metallic glitter in the ATF pan or on the magnet

    How to Fix

    Confirm the shudder is lock-up related by feeling for it only in the lock-up window (steady light throttle, no downshift). A drain-and-fill with genuine Mazda FZ ATF sometimes reduces it temporarily; friction-modifier additives are a band-aid, not a repair. The real fix is torque converter replacement with fresh fluid and a cooler line flush to purge the iron-contaminated fluid. Do not accept an ATF flush alone on a high-mileage unit with metal in the pan. Powertrain warranty (5yr/60k) covers this on newer cars; out of warranty, budget for the converter job.

    Typical repair cost:$1,200 - $3,200

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Aug 2026

    On the 2013-2018 Mazda CX-5, cX-5 owners report a speed-dependent whine or hum that rises and falls with road speed but is unaffected by engine speed or gear - the classic signature of a failing gear-set bearing rather than a transmission or tire issue. Two separate sources exist. On the transaxle side, Mazda issued a service bulletin covering 2013-2016 and certain 2017-2018 vehicles for a whine above roughly 10 mph traced to a damaged internal bearing. On AWD cars, the rear differential front housing was the culprit; Mazda modified that housing in October 2015 specifically to eliminate the bearing-failure noise, which dates the design defect to pre-October-2015 production. Mazda calls the rear differential and transfer case fluid 'lifetime,' and the units hold very small fluid volumes, so heat-degraded fluid accelerates the bearing wear.

    Common Symptoms

    • Whine or hum that changes with road speed only
    • Noise present when coasting in neutral
    • Noise from the rear of the vehicle on AWD models
    • Whine that begins above roughly 10 mph
    • Growl that changes pitch but not with engine RPM

    How to Fix

    Distinguish the noise source before spending money: a whine that tracks road speed only and is present in neutral coasting points at the driveline, not the engine. Rule out tire cupping and wheel bearings first. For pre-October-2015 AWD cars the remedy is the revised rear differential front housing / differential assembly. Preventively, ignore the 'lifetime fluid' label and change the rear differential and transfer case fluid every 30,000 to 60,000 miles with genuine Mazda spec fluid - it is a cheap hedge against a bearing failure that costs an order of magnitude more.

    Typical repair cost:$150 - $2,400

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Low ConfidenceVerifiedReviewed Aug 2026

    On the 2013-2021 Mazda CX-5, the CX-5's Smart City Brake Support uses a laser/infrared sensor behind the windshield glass on early cars, plus a grille-mounted radar and forward camera on later i-ACTIVSENSE builds. Two distinct failure patterns are documented. First, repeated 'Smart City Brake Support malfunction' warnings appearing across all conditions - clear days, rain, snow, city and highway - which Mazda technicians attributed to excessive heat affecting the sensor unit, with owners told no fix was available at the time. Second, phantom braking: the system intervening hard at highway speed with no vehicle or obstacle ahead, described by reviewers as overzealous and by owners as intervening too early and too aggressively. Toll transponders mounted near the sensor and a dirty grille emblem covering the radar are documented triggers of both false faults and false interventions.

    Common Symptoms

    • Smart City Brake Support malfunction message on the dash
    • Vehicle brakes hard at highway speed with nothing ahead
    • i-ACTIVSENSE warning light illuminated
    • System disables itself intermittently
    • Fault clears after cleaning the grille emblem or windshield
    • Fault returns repeatedly over months

    How to Fix

    Start with the cheap causes: clean the front Mazda emblem and grille radar face, clean the interior windshield surface directly in front of the SCBS sensor, and relocate any EZ-Pass or toll transponder away from the sensor area. If faults persist, have the dealer check for updated forward-sensing camera / SCBS module calibration software and confirm camera aim - misalignment after a windshield replacement is a common root cause (equipment recall 16E002000 covers improperly affixed SCBS brackets on replacement windshields). A heat-degraded sensor unit requires replacement. The system can be switched off from the settings menu as an interim measure if phantom braking is creating a rear-end collision risk.

    Typical repair cost:$0 - $1,400

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Aug 2026

    On the 2013-2020 Mazda CX-5, cX-5 owners across both generations report windshields that crack with no rock chip or identifiable impact point - cracks that begin at the A-pillar edge or the lower frit band and run across the glass, sometimes appearing overnight or after a temperature swing. The thin, lightweight laminated glass Mazda specifies appears to have little tolerance for body flex and thermal stress. The 2016 model year alone carries 22 documented cracked-windshield complaints, with additional clusters on 2013 and 2018. The financial sting is bigger on 2016.5 and later i-ACTIVSENSE cars, where the windshield-mounted forward sensing camera must be recalibrated after any glass replacement - and if a replacement windshield's Smart City Brake Support sensor bracket is improperly affixed, that itself was the subject of an equipment recall.

    Common Symptoms

    • Crack appears with no visible chip or impact point
    • Crack originates at the A-pillar edge or bottom of the glass
    • Crack appears after a large ambient temperature change
    • Crack propagates rapidly across the driver's view
    • Forward sensing camera / SCBS fault after glass replacement

    How to Fix

    No recall or warranty extension exists for the glass itself. Dealers routinely deny warranty coverage by attributing the crack to a road impact, so photograph the crack origin immediately and note the absence of a chip. Comprehensive insurance glass coverage is the practical route. Insist that the replacement be OEM or OEM-equivalent with correct sensor bracket geometry, and require a documented forward-camera recalibration on i-ACTIVSENSE-equipped cars (equipment recall 16E002000 covers improperly affixed Smart City Brake Support brackets on replacement windshields).

    Typical repair cost:$350 - $900

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Low ConfidenceVerifiedReviewed Aug 2026
    NHTSA Recalls2 recalls

    ENGINE

    Mazda North American Operations (Mazda) is recalling certain 2018-2019 CX-5, Mazda6, and 2019 Mazda3 vehicles. A software error in the powertrain control module (PCM) may cause the engine to stall.

    Campaign #19V49700027/06/2019

    FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

    Mazda North American Operations (Mazda) is recalling certain 2018 Mazda3, Mazda6, 2019 CX-3, 2018-2019 MX-5, CX-5, CX-9, and 2019-2020 Mazda2 vehicles. The impeller inside the low-pressure fuel pump may crack and deform, potentially causing the fuel pump to fail.

    Campaign #21V87500012/11/2021

    Enter your VIN at NHTSA.gov to check recalls specific to your vehicle.

    🔧
    A mechanic who knows YOUR exact car
    Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
    Get ahead of Mazda CX-5 problems — free
    Leave your email and we'll alert you the moment there's a new recall or known issue for your Mazda CX-5. Free, no account needed.

    Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.

    Other Mazda Models

    Mazda CX-6027Mazda CX-5026Mazda MX-5 Miata22Mazda MX-621Mazda Mazda319Mazda CX-7019

    Frequently Asked Questions

    What are the most common Mazda CX-5 problems?

    According to Au7o's analysis of 9,220+ owner reports, the 2015 Mazda CX-5 has 16 documented issues. The most frequently reported are: Sticking Brake Calipers and Premature Wear, SKYACTIV-D 2.2 Intake Shutter Valve and EGR Carbon Deposit Buildup (Diesel Recall), SKYACTIV-D 2.2 Diesel Engine Oil Dilution from Interrupted DPF Regeneration. Of these, 3 are rated critical and should be addressed promptly.

    Is the Mazda CX-5 reliable?

    The 2015 Mazda CX-5 has 16 known issues documented across 9,220+ owner reports. 3 issues are rated critical: Sticking Brake Calipers and Premature Wear and SKYACTIV-D 2.2 Intake Shutter Valve and EGR Carbon Deposit Buildup (Diesel Recall) and SKYACTIV-D 2.2 Diesel Engine Oil Dilution from Interrupted DPF Regeneration. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

    How much does it cost to fix common Mazda CX-5 problems?

    Repair costs for known Mazda CX-5 issues range from $0 to $4,500, depending on the specific problem and whether you choose DIY or professional repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

    What is the 2013-2019 Mazda CX-5 Sticking Brake Calipers and Premature Wear?

    Rear brake calipers and electronic parking brake (EPB) stick or seize due to moisture accumulation in caliper brackets. This causes uneven brake pad wear, overheating, and premature failure, often before 40,000 miles. Severity: high.

    What is the 2013-2018 Mazda CX-5 SKYACTIV-D 2.2 Intake Shutter Valve and EGR Carbon Deposit Buildup (Diesel Recall)?

    The 2.2 SKYACTIV-D runs two EGR valves and recirculates exhaust gas aggressively to meet emissions targets. Soot from that recirculated gas bakes onto the intake shutter valve, the intake manifold runners and the EGR passages; owners have found manifolds and EGR valves 80 percent… Repairs typically run $0-$1,500. Severity: high.

    What is the 2013-2021 Mazda CX-5 SKYACTIV-D 2.2 Diesel Engine Oil Dilution from Interrupted DPF Regeneration?

    The 2.2 SKYACTIV-D uses post-injection of diesel into the cylinder to raise exhaust temperature for diesel particulate filter regeneration. Fuel that is not burned washes past the rings into the sump. If the engine is shut off mid-regeneration - the normal outcome of short urban… Repairs typically run $120-$4,500. Severity: high.

    What is the 2013-2023 Mazda CX-5 Carbon Buildup on Intake Valves (Skyactiv)?

    Direct-injection Skyactiv engines accumulate carbon deposits on intake valves due to oil vapors from the PCV system. Without port injection to clean valves, carbon can fuse to valve surfaces over time, typically appearing around 65,000+ miles. Severity: medium.

    What is the 2014-2021 Mazda CX-5 Infotainment System CMU Failure (Black Screen)?

    The Connectivity Master Unit (CMU) fails, causing the infotainment screen to go black, flicker, freeze, or loop repeatedly. Often caused by corrupted firmware, faulty Nav SD card contacts, or failing internal memory. Severity: medium.

    What is the 2013-2022 Mazda CX-5 Premature Wheel Bearing Failure?

    Wheel bearings fail prematurely due to impact damage (potholes, curbs), contamination from water/salt/grit, or manufacturing defects. Common issue across all model years. Severity: medium.

    What is the 2013-2018 Mazda CX-5 Mass Airflow (MAF) Sensor Failure?

    MAF sensor becomes contaminated with dirt or suffers water damage, providing incorrect air intake readings. Causes vehicle to enter "limp mode" with severe performance degradation. Severity: medium.

    What is the 2013-2019 Mazda CX-5 Air Conditioning Compressor Failure?

    AC compressor fails due to leaky seals, inadequate lubrication, or stress from system clogs/moisture. Common failure point for aging CX-5s, particularly in hot climates. Severity: medium.

    What is the 2013-2016 Mazda CX-5 Exhaust Manifold/Gasket Leaks?

    Exhaust manifold gasket becomes deformed from impact (speed bumps, road debris), causing exhaust leaks. Can also develop manifold cracks over time from heat cycling. Severity: medium.

    What is the 2013-2016 Mazda CX-5 Rear Liftgate Gas Strut Corrosion and Sudden Hatch Drop (Recall 16V644)?

    Insufficient corrosion-protective coating was applied to the ends of the external cylinders of the rear hatch/liftgate gas stay dampers on first-generation KE CX-5 vehicles built December 15, 2011 through December 26, 2015. Water carrying road salt enters the exposed cylinder end… Repairs typically run $0-$180. Severity: medium.

    What is the 2013-2022 Mazda CX-5 Torque Converter Lock-Up Clutch Shudder / Judder (FW6A-EL Automatic)?

    The six-speed FW6A-EL automatic in the CX-5 locks its torque converter clutch very early and holds it locked across a wide range to chase fuel economy. That aggressive lock-up strategy wears the lock-up clutch lining, and the resulting iron powder contaminates the ATF. Owners rep… Repairs typically run $1,200-$3,200. Severity: medium.

    What is the 2013-2018 Mazda CX-5 Transaxle Bearing Whine and Rear Differential Housing Noise (AWD)?

    CX-5 owners report a speed-dependent whine or hum that rises and falls with road speed but is unaffected by engine speed or gear - the classic signature of a failing gear-set bearing rather than a transmission or tire issue. Two separate sources exist. On the transaxle side, Mazd… Repairs typically run $150-$2,400. Severity: medium.

    What is the 2013-2021 Mazda CX-5 Sunroof Drain Tube Disconnection and Interior Water Intrusion?

    On sunroof-equipped CX-5s the front sunroof drain hoses work loose from their drain-tray nipples behind the A-pillar trim, or the tubes clog with organic debris. Because nothing visibly leaks at the headliner, water tracks down inside the pillar and body cavity and pools under th… Repairs typically run $100-$600. Severity: medium.

    What is the 2013-2021 Mazda CX-5 Smart City Brake Support / i-ACTIVSENSE Malfunction and Phantom Braking?

    The CX-5's Smart City Brake Support uses a laser/infrared sensor behind the windshield glass on early cars, plus a grille-mounted radar and forward camera on later i-ACTIVSENSE builds. Two distinct failure patterns are documented. First, repeated 'Smart City Brake Support malfunc… Repairs typically run $0-$1,400. Severity: medium.

    What is the 2013-2020 Mazda CX-5 Front Suspension Clunking Noise?

    Clunking, knocking, or rattling from front suspension caused by dry strut mount bearings, loose sway bar links, worn ball joints, or loose crossbar/cowl bolts. Severity: low.

    What is the 2013-2020 Mazda CX-5 Windshield Stress Cracking Without Impact Damage?

    CX-5 owners across both generations report windshields that crack with no rock chip or identifiable impact point - cracks that begin at the A-pillar edge or the lower frit band and run across the glass, sometimes appearing overnight or after a temperature swing. The thin, lightwe… Repairs typically run $350-$900. Severity: low.

    Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.

    Data sourced from 9,220+ owner reports, NHTSA recalls, TSBs, and automotive forums.