P0016 on Dacia: How to Diagnose & Fix

P0016 stands for "Crankshaft/Camshaft Position Correlation - Bank 1 Sensor A." P0016 means the engine computer found that the crankshaft and camshaft position sensors on Bank 1 (Sensor A) are not lining up the way they should — the timing 'correlation' between them is out of range. These two sensors tell the computer where the pistons and valves are so it can time fuel injection and spark precisely. When their signals don't agree within tolerance, the computer sets this code. It generally indicates an engine timing issue, which may be a worn timing chain, a sticking variable valve timing component, or a sensor problem, and can cause rough running, hard starting, or potential engine damage if ignored. On Dacia it is documented across 1 model: Duster.

The most common causes of P0016 are: Stretched timing chain or worn timing components (guides/tensioner), Faulty camshaft position sensor or crankshaft position sensor, Stuck or faulty variable valve timing (VVT/VCT) actuator or solenoid, Low or dirty engine oil affecting the VVT actuator, Clogged oil control valve or restricted oil passages, Timing chain/belt installed one tooth off after service, Damaged reluctor/tone ring on the crankshaft or camshaft, Wiring or connector faults at the position sensors. The specific cause varies by vehicle.

Published repair estimates on Dacia range from $700 to $1,500 depending on the model and root cause. If an issue mentions a recall or campaign, check your VIN with the manufacturer or NHTSA and confirm eligibility and coverage with a dealer.