Au7o mascotAu7o
Known IssuesTest Hub demo
  1. Au7o
  2. /
  3. Known Issues
  4. /
  5. Infiniti
  6. /
  7. QX80
Infiniti · Known Issues

2022 Infiniti QX80 Problems: 4 Known Issues

2022 model year · NHTSA recalls, manufacturer TSBs, and owner forum reports · Updated September 2026

Share:@au7o.io

2022 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example
Known IssuesMotorcycle IssuesDTC LookupDrivePricingAboutTermsPrivacyCookiesConsentData rightsCopyrightFeedback
Share:@au7o.io

Vehicle data and repair guidance on this site are compiled with AI assistance and may contain errors. Always verify with your service manual or a qualified mechanic.

Data protection representation

DataRep representative in the United KingdomDataRep representative in the European Union
Au7o · 2026
Built for DIY mechanics. Privacy-first.
Explore free Hub demo
Issue summary

According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2022 Infiniti QX80 has 4 documented known issues, with 1 rated critical. The most serious is Hydraulic Body Motion Control System Leak ($500-$3,000 repair). Across all issues with published estimates, repair costs range from $500 to $3,000. DIY maintenance guides at au7o.io.

In This Article

  • QX80 Suspension2
  • QX80 Safety/Recalls1
  • QX80 Electrical1
  • Recalls4
  • FAQ
Get Started
Back to top

In This Article

  • Suspension2
  • Safety/Recalls1
  • Electrical1
  • Recalls4
  • FAQ

All 4 Known Issues

Filter:
ALL YEARS2026202520242023202220212020201920182017201620152014201320122011

On the 2018-2026 Infiniti QX80, the QX80 equipped with Hydraulic Body Motion Control (HBMC) develops fluid leaks from the hydraulic actuators and lines. The system uses high-pressure hydraulic fluid to control body roll, and seal degradation leads to leaks and reduced effectiveness.

Common Symptoms

  • Increased body roll in corners
  • Hydraulic fluid puddle under vehicle
  • HBMC warning light on dashboard
  • Clunking noise over bumps

How to Fix

Inspect and replace leaking hydraulic lines and actuator seals. The HBMC fluid reservoir should be checked regularly. Complete system replacement is expensive but may be necessary if multiple components have failed.

Typical repair cost:$500 - $3,000

Research This Issue

GoogleRedditYouTubeNHTSA
Community Reported
Medium Confidence

On the 2014-2022 Infiniti QX80, qX80 vehicles with the rear self-leveling air suspension develop a persistent rear sag that makes the truck look permanently loaded, and the failure usually cascades in a predictable order. The rubber air springs crack and leak with age, typically after five to seven years. The compressor then runs constantly trying to hold ride height, and running constantly is what burns it out — so an owner who ignores a slow sag ends up paying for the compressor as well as the springs. Separately and very commonly, the rear ride height sensor, which connects the frame to the lower control arm on the driver's side, fails when water infiltrates it and shorts, causing the system to command the wrong height or give up entirely. RepairPal puts height sensor replacement around $690-$719 and compressor replacement around $824-$858 before any air spring work.

Common Symptoms

  • Rear end sagging as though loaded when empty
  • Vehicle sits low on all four corners after sitting overnight
  • Air compressor running constantly or far more than normal
  • Suspension warning light or ride height fault message
  • Vehicle fails to raise or lower on command
  • Harsh or bottoming ride at the rear

How to Fix

Diagnose in the right order and you avoid paying twice. Listen for the compressor running far longer or more often than normal, which is the earliest sign and means the system is chasing a leak. Spray soapy water on the rear air springs and their fittings and look for bubbles. Have the height sensor checked with a scan tool that reads live ride height values before replacing it on suspicion, since a failed sensor and a leaking spring produce a similar sag. Replace leaking air springs promptly rather than nursing them — every day of a leak is compressor life burned. If the compressor has already failed, replace the leaking springs at the same time or the new compressor follows the old one. Owners keeping a high-mileage QX80 long term sometimes convert to a conventional coil setup, which eliminates the failure mode at the cost of the self-leveling function; that is a reasonable choice on a truck that never tows, and a poor one on a truck that does.

What you need to fix it

Only diagnosis- and fitment-reviewed repair parts are linked here.

  • Genuine Infiniti non-HBMC rear self-leveling shock absorber
    OEME6210-1LA8A

    Confirmed leaking or failed pneumatic rear-shock branch on the cataloged non-HBMC/LE-High configuration Fitment/availability: E6210-1LA8A is a rear shock cataloged for 2014-2024 QX80 LE/High and the retailer states quantity two with the …

    InfinitiPartsDeal
  • Genuine Infiniti rear ride-height sensor for the non-HBMC rear-leveling branch
    OEM53820-1LA2A

    Scan-data- and circuit-confirmed rear height-sensor failure branch Fitment/availability: 53820-1LA2A is the rear height sensor cataloged across 2014-2024 QX80, with the official ride-control listing distinguishing the rear sensor without…

    InfinitiPartsDeal
  • Genuine Infiniti rear-leveling air compressor assembly
    OEM53400-1LA4C

    Pressure/output/electrical-confirmed compressor failure branch after all leaks are repaired Fitment/availability: 53400-1LA4C is the current compressor assembly replacing 1LA4A/1LA4B and is cataloged for 2014-2024 QX80. Confirm VIN and s…

    InfinitiPartsDeal

As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

Typical repair cost:$690 - $3,000

Research This Issue

GoogleRedditYouTubeNHTSA
Community Reported
High ConfidenceVerifiedReviewed Aug 2026

On the 2014-2026 Infiniti QX80, on QX80 vehicles fitted with 22-inch wheels, the Gross Axle Weight Rating printed on the certification label is incorrect and higher than the true rating. An owner loading the vehicle to the posted number — a realistic scenario on a three-row SUV used for towing, hauling, or family road trips — can overload the axle and the tires without any indication of doing so, which puts the vehicle out of compliance with FMVSS 110, Tire Selection and Rims. NHTSA campaign 26V455000 covers 2014-2027 QX80 with 22-inch wheels alongside 2020-2026 Nissan Armada and 2011-2013 QX56. VINs became searchable on NHTSA.gov July 16, 2026, and interim owner letters were expected to mail August 21, 2026. This is a very recent campaign with the final remedy still pending.

Common Symptoms

  • No mechanical symptoms — the defect is an incorrect information label
  • Vehicle can be unknowingly overloaded when loaded to the posted rating

How to Fix

The remedy is a corrected certification label: dealers will install new labels and Infiniti will also mail replacement labels to owners. Because the final remedy is still being rolled out, the practical near-term action is to stop relying on the door-jamb GAWR figure when loading a 22-inch-wheel QX80. Load conservatively, weigh the vehicle at a public scale if you tow or haul near capacity, and confirm the load rating stamped on the tires themselves rather than trusting the label. Note that the earlier campaign 14V129000 addressed the same class of error on 2014 QX80s with 20-inch wheels, so a given vehicle's history may show a prior label correction that does not satisfy this one.

Typical repair cost:$0 - $0

Research This Issue

GoogleRedditYouTubeNHTSA
Community Reported
High ConfidenceVerifiedReviewed Aug 2026

On the 2018-2026 Infiniti QX80, the QX80 infotainment system exhibits noticeable lag when navigating menus, inputting destinations, and switching between audio sources. The aging hardware platform cannot keep pace with modern connected car expectations for a luxury SUV.

This issue also affects: Infiniti Q60, Infiniti QX50, Infiniti QX55

Common Symptoms

  • Slow touchscreen response
  • Navigation route calculation delays
  • Audio source switching lag
  • Backup camera delayed display

How to Fix

Update to the latest available firmware. Reduce the number of paired Bluetooth devices. The 2025+ models received an updated system, but earlier models remain limited by hardware constraints.

Typical repair cost:$0 - $500

Research This Issue

GoogleRedditYouTubeNHTSA
Community Reported
High Confidence
NHTSA Recalls4 recalls

BACK OVER PREVENTION:SOFTWARE

Nissan North America, Inc. (Nissan) is recalling certain 2025 Murano, 2025-2026 Armada, and Infiniti QX80 vehicles. A software error may occur in the In-Vehicle Infotainment (IVI) system at vehicle startup, resulting in the rearview camera image not displaying when the vehicle is shifted into reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

Campaign #25V82100026/11/2025

EQUIPMENT:OTHER:LABELS

Nissan North America, Inc. (Nissan) is recalling certain 2020-2026 Nissan Armada, 2011-2013 Infiniti QX56, and 2014-2027 QX80 vehicles equipped with 22" wheels. The Gross Axle Weight Rating (GAWR) listed on the certification label is incorrect, which can allow the vehicle to be overloaded. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Campaign #26V45500015/07/2026

BACK OVER PREVENTION

Nissan North America, Inc. (Nissan) is recalling certain 2024-2025 Rogue and 2025 INFINITI QX80 vehicles. A software error may cause the rearview camera to display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

🔧
A mechanic who knows YOUR exact car
Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
Get ahead of Infiniti QX80 problems — free
Leave your email and we'll alert you the moment there's a new recall or known issue for your Infiniti QX80. Free, no account needed.

Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.

Other Infiniti Models

Infiniti G3723Infiniti FX3520Infiniti Q5011Infiniti G3511Infiniti QX508Infiniti QX558

Frequently Asked Questions

What are the most common Infiniti QX80 problems?

According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2022 Infiniti QX80 has 4 documented issues. The most frequently reported are: Hydraulic Body Motion Control System Leak, Certification Label Lists Incorrect Gross Axle Weight Rating (Recall 26V455000), Rear Self-Leveling Air Suspension Sag from Air Spring Leak, Height Sensor, or Compressor Failure. Of these, 1 is rated critical and should be addressed promptly.

Is the Infiniti QX80 reliable?

The 2022 Infiniti QX80 has 4 known issues compiled from NHTSA recalls, manufacturer TSBs, and owner forum reports. 1 issue is rated critical: Hydraulic Body Motion Control System Leak. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

How much does it cost to fix common Infiniti QX80 problems?

Repair costs for known Infiniti QX80 issues range from $0 to $3,000, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, Hydraulic Body Motion Control System Leak, typically costs $500-$3,000 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

What is the 2018-2026 Infiniti QX80 Hydraulic Body Motion Control System Leak?

The QX80 equipped with Hydraulic Body Motion Control (HBMC) develops fluid leaks from the hydraulic actuators and lines. The system uses high-pressure hydraulic fluid to control body roll, and seal degradation leads to leaks and reduced effectiveness. Repairs typically run $500-$3,000. Severity: high.

What is the 2014-2026 Infiniti QX80 Certification Label Lists Incorrect Gross Axle Weight Rating (Recall 26V455000)?

On QX80 vehicles fitted with 22-inch wheels, the Gross Axle Weight Rating printed on the certification label is incorrect and higher than the true rating. An owner loading the vehicle to the posted number — a realistic scenario on a three-row SUV used for towing, hauling, or fami… Repairs typically run $0-$0. Severity: medium.

Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.

Data compiled from NHTSA recalls, manufacturer TSBs, automotive forums, and AI-assisted research. No aggregated owner-report counts available for this vehicle yet.

Campaign #24V74800003/10/2024

BACK OVER PREVENTION:SOFTWARE

Nissan North America, Inc. (Nissan) is recalling certain 2025 INFINITI QX80 vehicles equipped with an Around View Monitor (AVM). A software error may cause the rearview camera to freeze and display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Campaign #24V74700003/10/2024

Enter your VIN at NHTSA.gov to check recalls specific to your vehicle.

What is the 2014-2022 Infiniti QX80 Rear Self-Leveling Air Suspension Sag from Air Spring Leak, Height Sensor, or Compressor Failure?

QX80 vehicles with the rear self-leveling air suspension develop a persistent rear sag that makes the truck look permanently loaded, and the failure usually cascades in a predictable order. The rubber air springs crack and leak with age, typically after five to seven years. The c… Repairs typically run $690-$3,000. Severity: medium.

What is the 2018-2026 Infiniti QX80 Infotainment System Slow Response?

The QX80 infotainment system exhibits noticeable lag when navigating menus, inputting destinations, and switching between audio sources. The aging hardware platform cannot keep pace with modern connected car expectations for a luxury SUV. Repairs typically run $0-$500. Severity: low.