P0014 on Fiat: How to Diagnose & Fix
Exhaust Camshaft Position Timing - Over-Advanced (Bank 1)
1 Fiat model · 1 documented issue · 1 critical · $800-$1,400 repair
P0014 on Fiat by model: symptoms, diagnosis and fix
The MultiAir electro-hydraulic valve actuation system can fail, causing rough idle, misfires, and check engine light with codes P0014 or P1014. This is a common failure on the 1.4L MultiAir engine, often occurring between 40,000 and 80,000 miles.
Common Symptoms
- Rough idle
- Engine misfire
- Check engine light
- Reduced power
- Ticking noise from engine
How to Fix
Replace the MultiAir actuator unit on top of the cylinder head. Use updated Mopar part number for revised design.
Sources for this issue (1)
P0014 code reference
General diagnostic-code context. The code alone does not confirm a cause for your vehicle; use the applicable issue card and its sources.
Frequently asked questions
What does P0014 mean on a Fiat?
P0014 stands for "Exhaust Camshaft Position Timing - Over-Advanced (Bank 1)." P0014 means the exhaust camshaft on bank 1 is timed too far advanced — the variable valve timing (VVT) system has moved the cam beyond the position the computer commanded, or it's stuck in an over-advanced position. The engine uses VVT to rotate the camshaft and optimize valve timing for power, economy, and emissions; the computer compares the commanded cam position to the actual reading from the cam sensor and flags this code when they don't agree. Common results are rough idle, reduced power, poor fuel economy, or a rattle at start-up. Oil flow and the VVT actuator are the usual suspects. On Fiat it is documented across 1 model: 500.
What are the most common causes of P0014?
The most common causes of P0014 are: Low or dirty engine oil restricting VVT operation, Stuck or failed camshaft oil control valve (VVT solenoid), Clogged VVT solenoid screen or oil passages, Faulty camshaft phaser/actuator, Wiring or connector fault at the oil control valve, Stretched timing chain or jumped timing, Camshaft position sensor fault giving incorrect reading. The specific cause varies by vehicle.
How much does it cost to fix P0014 on a Fiat?
Published repair estimates on Fiat range from $800 to $1,400 depending on the model and root cause. If an issue mentions a recall or campaign, check your VIN with the manufacturer or NHTSA and confirm eligibility and coverage with a dealer.
Looking for P0014 on a different make?
View P0014 across all makes →Content compiled with AI assistance using NHTSA complaints, TSBs, and owner reports. May contain errors. Always verify with your vehicle's service manual.