Au7o mascotAu7o
Known IssuesTest Hub demo
  1. Au7o
  2. /
  3. Known Issues
  4. /
  5. Infiniti
  6. /
  7. G37
Infiniti · Known Issues

2008 Infiniti G37 Problems: 20 Known Issues

2008 model year · NHTSA recalls, manufacturer TSBs, and owner forum reports · Updated September 2026

Share:@au7o.io

2008 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

Known IssuesMotorcycle IssuesDTC LookupDrivePricingAboutTermsPrivacyCookiesConsentData rightsCopyrightFeedback
Share:@au7o.io

Vehicle data and repair guidance on this site are compiled with AI assistance and may contain errors. Always verify with your service manual or a qualified mechanic.

Data protection representation

DataRep representative in the United KingdomDataRep representative in the European Union
Au7o · 2026
Built for DIY mechanics. Privacy-first.
Explore free Hub demo
No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example
Issue summary

According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2008 Infiniti G37 has 20 documented known issues, with 8 rated critical. The most serious are OCS Varistor Defect Suppresses Passenger Airbag (Recall 08V521000) ($0-$0 repair), VVEL Actuator and Control Module Failure Causing Limp Mode ($600-$3,000 repair), Timing Chain Stretch and Guide Wear on VQ37VHR ($1,800-$4,000 repair), Oil Gallery Gasket Leak ($400-$1,200 repair), Electronic Steering Lock Failure ($300-$1,000 repair), Concentric Slave Cylinder Failure (Manual) ($800-$2,000 repair), Crankshaft Position Sensor Failure Causing Hot Stall and No-Start (P0335) ($80-$350 repair) and Cam Cover Gasket Leak Causing Low Oil Pressure ($400-$1,400 repair). Across all issues with published estimates, repair costs range from $60 to $4,500. DIY maintenance guides at au7o.io.

In This Article

  • G37 Engine7
  • G37 Steering2
  • G37 Transmission2
  • G37 Safety/Recalls1
  • G37 Interior2
  • G37 Body/Panels1
  • G37 Suspension1
  • G37 Cooling1
  • G37 Fuel System1
  • G37 HVAC1
  • G37 Electrical1
  • Recalls1
  • FAQ
Get Started
Back to top

In This Article

  • Engine7
  • Steering2
  • Transmission2
Safety/Recalls
1
  • Interior2
  • Body/Panels1
  • Suspension1
  • Cooling1
  • Fuel System1
  • HVAC1
  • Electrical1
  • Recalls1
  • FAQ
  • All 20 Known Issues

    Filter:
    ALL YEARS201320122011201020092008

    On the 2008-2013 Infiniti G37 VQ37VHR, the VQ37VHR uses Variable Valve Event and Lift, a mechanical system on the intake side that varies lift continuously through an actuator motor driving a control shaft, managed by its own control module. When the actuator motor, the control shaft position sensor, or the VVEL module fails, the engine drops into a severe limp mode with essentially no throttle response — the car becomes undrivable rather than merely down on power. Owners typically see a scatter of seemingly unrelated codes alongside the failure, which sends diagnosis in the wrong direction. Contributing factors include oil starvation and sludge in the VVEL assembly from extended oil change intervals, and moisture or connector corrosion at the module.

    Common Symptoms

    • Severe limp mode with no throttle response
    • Check engine light with multiple simultaneous codes
    • Rough idle or stumbling
    • Sudden loss of power while driving
    • Ticking or whirring from the top of the engine

    How to Fix

    Do not let a shop start replacing sensors on a scattergun basis. Have the VVEL actuator motor, control shaft position sensor, module, and their connectors checked as a system, including power and ground at the module — corroded or backed-out connector pins mimic a failed actuator and cost nothing to fix. Be aware that replacement is not a bolt-on job: the VVEL actuator assembly and control shaft position sensor are designated non-reusable once removed, and installation requires a calibration and relearn procedure with dealer-level tooling, which puts this beyond most DIY work. Keep oil changes at 5,000 miles with the correct full synthetic — the VVEL assembly is oil-fed and sludge is a direct cause of actuator failure. Diagnose it promptly rather than driving in limp mode, since continued operation risks damage to the exhaust camshaft.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Genuine Infiniti VVEL control module 23751-JK00B
      OEM23751-JK00B

      Confirm VIN/build date returns 23751-JK00B and complete required initialization; do not substitute for 23751-3EV0A by mode

      InfinitiPartsDeal
    • Genuine Infiniti VVEL control module 23751-3EV0A
      OEM23751-3EV0A

      Confirm exact production date/body/VIN and required learning; do not order both modules.

      InfinitiPartsDeal
    • Genuine Infiniti passenger-side VVEL actuator assembly
      OEM23745-EY06A

      Bank/passenger-side actuator branch after testing proves that assembly failed Fitment/availability: Current supersession 23745-EY06A fits listed 2008-2013 G37 VQ37VHR applications and replaces earlier A-suffix revisions. It is side-speci…

      InfinitiPartsDeal
    • Genuine Infiniti driver-side VVEL actuator assembly
      OEM23745-EY06B

      Bank/driver-side actuator branch after testing proves that assembly failed Fitment/availability: Current supersession 23745-EY06B fits listed 2008-2013 G37 VQ37VHR applications and replaces earlier B-suffix revisions. Do not swap sides o…

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$600 - $3,000

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2008-2013 Infiniti G37 VQ37VHR, the VQ37VHR runs three timing chains — a primary and two secondaries — with plastic guides and hydraulic tensioners. The chains stretch and the guides wear, and because the tensioners rely on oil pressure to take up slack, any oil pressure loss or extended change interval accelerates it sharply. The first symptom is a rattle from the front of the engine on cold start that lasts a second or two until pressure builds, progressing to a rattle that persists at idle. Left alone, stretch pushes cam timing out of correlation and sets timing codes; in the worst outcome the chain skips or a guide fragments, and on this interference engine that means bent valves.

    Common Symptoms

    • Rattle from the front of the engine on cold start
    • Rattle that persists at idle once warm
    • Check engine light with cam or crank correlation codes
    • Rough running or reduced power
    • Whining or chain slap that changes with RPM

    How to Fix

    Treat a front-of-engine rattle on cold start as a timing chain issue and act on it rather than waiting for a code — chain, guides, and tensioners replaced proactively is a fraction of the cost of a destroyed engine, though it is still a substantial job because the front cover comes off. Have the shop scan for cam and crank correlation codes and check actual cam timing against spec. Critically, verify oil pressure at the same time: on this engine the chain rarely wears out on its own, it wears out because oil pressure dropped from a leaking cam cover or oil gallery gasket, and replacing the chain without fixing the pressure loss just repeats the failure. Change oil every 5,000 miles with full synthetic instead of following the extended factory interval. On a used purchase, insist on a genuine cold start before buying.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • OEM VQ37VHR timing kit
      OEMZ1-configured Nissan OEM VQ37VHR timing kit

      Confirmed VQ37VHR chain/guide/tensioner repair Fitment/availability: Configure the exact G37 model year and choose the required chains, guides and cam-chain tensioners. Do not buy from noise alone; compare included components with the VI…

      Z1 Motorsports
    • OEM VQ35HR/VQ37VHR timing-cover O-ring and seal kit
      OEMNissan OEM VQ35HR/VQ37VHR timing-cover O-ring and seal kit

      Conditional disturbed-seal bundle for the front-cover timing procedure Fitment/availability: Match kit contents to the exact VQ37VHR service procedure and VIN. It supports front-cover reassembly but does not diagnose or repair chain wear…

      Z1 Motorsports

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$1,800 - $4,000

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2008-2013 Infiniti G37, the VQ37VHR engine develops oil leaks from the oil gallery gaskets located between the upper and lower oil pans. Oil seeps onto the exhaust, creating a burning smell and potential fire hazard if left unaddressed.

    Common Symptoms

    • Burning oil smell from engine bay
    • Oil dripping on exhaust manifold
    • Visible oil seepage on lower engine block

    How to Fix

    Replace the oil gallery gaskets, which requires removing the lower oil pan. Use updated Nissan/Infiniti gaskets that have improved sealing material. Clean all mating surfaces thoroughly before reinstalling.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Z1 VQ37VHR rear timing-cover oil-gallery gasket kit
      OEMZ1 VQ37VHR rear timing-cover oil-gallery gasket kit

      Updated gallery-gasket and fastener repair kit after confirmed internal pressure leakage Fitment/availability: Fits the listed VQ37VHR G37 applications and includes two updated composite-steel gaskets, two O-rings and 20 Allen bolts. Con…

      Z1 Motorsports
    • OEM VQ35HR/VQ37VHR timing-cover O-ring and seal kit
      OEMNissan OEM VQ35HR/VQ37VHR timing-cover O-ring and seal kit

      Verify kit contents against the VIN and current service diagram; it is not a standalone cure for low pressure

      Z1 Motorsports

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$400 - $1,200

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence

    On the 2008-2013 Infiniti G37 VQ37VHR, the crankshaft position sensor mounted on the transmission bell housing of the VQ37VHR is a documented failure point on G37s past about 80k miles. It typically fails when hot: the engine stalls after warm-up or extended driving, cranks without starting until it cools, then restarts normally. P0335 is stored. Owners who fit cheap aftermarket sensors report repeat failures, so the community advice is OEM or Hitachi only.

    Common Symptoms

    • Engine stalls when hot
    • Cranks but will not start until cooled
    • Intermittent rough running
    • Check engine light with P0335

    How to Fix

    Replace the crankshaft position sensor with an OEM Nissan/Hitachi unit (passenger side of the bell housing); clear codes. If P0340/P0345 accompany it, the camshaft sensors on top of the engine are separate parts and should be diagnosed on their own. No recall.

    Typical repair cost:$80 - $350

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Low ConfidenceVerifiedReviewed Sep 2026

    On the 2008-2011 Infiniti G37 VQ37VHR, on pre-2012 VQ37VHR engines the cam cover gaskets fail and leak, and unlike an ordinary valve cover weep this one matters mechanically: the leak path bleeds down oil pressure feeding the top end. Low oil pressure on this engine starves the VVEL assembly and the cam and rod bearings, and owners who dismiss the leak as a minor seep have lost engines to it. The visible signs are oil pooling in the spark plug wells, oil on the exhaust manifolds producing a burning smell and smoke from under the hood, and a low oil pressure warning or gauge reading that comes up at idle when hot.

    Common Symptoms

    • Oil pooled in the spark plug wells
    • Burning oil smell and smoke from the engine bay
    • Low oil pressure warning, especially at hot idle
    • Visible oil on the exhaust manifolds or down the block
    • Misfires from oil-fouled ignition coils
    • Ticking from the top end that worsens when warm

    How to Fix

    Treat a cam cover leak on a pre-2012 G37 as urgent rather than cosmetic, particularly if it is accompanied by any low oil pressure indication. Replace both cam cover gaskets along with the spark plug tube seals and the half-moon seals, and inspect the plug wells for oil that has soaked the coil boots — oil-fouled coils cause misfires that get misdiagnosed as ignition failure. Verify actual oil pressure with a mechanical gauge rather than trusting the dash indication before and after the repair. If pressure remains low with the gaskets fixed, stop driving the car and investigate the oil pump and pickup, since continued operation at low pressure will destroy the bearings. Use OEM gaskets here; aftermarket sets have a poor record of resealing on this engine.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • OEM VQ37VHR valve-cover gasket and tube-seal selections
      OEM13270-EY01A / 13270-EY01B / 13271-EY00A

      Confirmed external valve-cover leak repair with selectable left/right gaskets and tube seals Fitment/availability: Fits 2008-2013 G37 Coupe and the listed later Sedan/Convertible VQ37VHR branches.

      Z1 Motorsports
    • OEM VQ37VHR valve-cover and gasket kit
      OEMZ1 assembled OEM VQ37VHR valve-cover kit

      Do not replace sound covers merely because the serviceable perimeter gasket leaks; confi

      Z1 Motorsports
    • Nissan OEM fluid-gasket RTV
      OEMNissan OEM fluid gasket RTV

      Small specified-joint sealant branch for the valve-cover procedure Fitment/availability: Use only at the service-manual junctions and in the specified bead size; it does not replace molded cover gaskets and excess RTV can contaminate oil…

      Z1 Motorsports

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$400 - $1,400

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Aug 2026

    On the 2008-2013 Infiniti G37 VQ37VHR, the Hitachi coil-on-plug units on the VQ37VHR are a recurring failure item on higher-mileage G37s. Heat and electrical stress cause the coil body to blister or bulge, producing a random or single-cylinder misfire, rough idle and flashing check-engine light. Infiniti's bulletin ITB11-017A (cited by owners and parts guides) tells technicians that a P0300-P0306 misfire with a blistered, deformed or melted coil outer surface indicates coil failure. On the VQ37 the rear bank coils are buried under the intake plenum, which drives labor cost.

    Common Symptoms

    • Rough idle or shaking at idle
    • Flashing check engine light under load
    • Misfire counts on one or more cylinders
    • Hesitation and power loss

    How to Fix

    Replace the failed coil (and inspect all six for blistering); most shops replace all six with spark plugs once the first fails past 80k miles. Use OEM Hitachi coils—aftermarket units have a poor reputation on this engine. If coils fail repeatedly, check engine grounds. No recall.

    Typical repair cost:$150 - $900

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Low ConfidenceVerifiedReviewed Sep 2026

    On the 2008-2010 Infiniti G37 VQ37VHR, early-production VQ37VHR engines consume noticeably more oil than owners expect, and the 2008-2010 build years are the most affected. The consumption is real rather than imagined leakage, driven by ring and cylinder wear characteristics on early blocks, and it is aggravated by hard driving and by the long factory oil change interval. The practical danger is not the oil itself but what running low does to the rest of the engine: the VVEL assembly and the timing chain tensioners are oil-pressure dependent, so an owner who tops up only when the light comes on is quietly setting up a far more expensive failure.

    Common Symptoms

    • Oil level low between scheduled changes
    • Low oil level warning light
    • Consumption of roughly a quart every 2,000 to 3,000 miles
    • Blue smoke on startup or under hard acceleration
    • Fouled spark plugs at higher mileage

    How to Fix

    Establish the actual consumption rate over a measured interval before doing anything else — check the level on the dipstick at every other fuel fill, on level ground with the engine warm and shut off for several minutes. A quart every 2,000 to 3,000 miles on an early VQ37VHR is common and is managed by topping up, not by opening the engine. Rule out the cheap external causes first, because they mimic consumption: the cam cover gaskets and the oil gallery gasket both leak on this engine and are far more likely than ring wear on a car with visible oil in the plug wells or on the block. Shorten the oil change interval to 5,000 miles with the correct full synthetic, and carry a quart in the trunk. Blue smoke on startup after sitting points to valve stem seals; smoke under sustained load points to rings.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Mobil 1 Extended Performance 5W-30 full-synthetic motor oil, 5 qt
      OEMMobil 1 Extended Performance 5W-30 — 5 qt

      Confirm total service capacity; oil does not repair a leak, PCV fault, valve seals, rings or bores.

      Walmart
    • OEM VQ37VHR valve-cover gasket and tube-seal selections
      OEM13270-EY01A / 13270-EY01B / 13271-EY00A

      This repairs confirmed external leakage; it does not treat ring consumption or low oil pressure.

      Z1 Motorsports
    • Z1 VQ37VHR rear timing-cover oil-gallery gasket kit
      OEMZ1 VQ37VHR rear timing-cover oil-gallery gasket kit

      It does not explain normal top-off consumption or external oil on the engine.

      Z1 Motorsports

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$100 - $3,500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Aug 2026

    On the 2008-2013 Infiniti G37, like the G35, the G37 suffers from electronic steering wheel lock actuator failures that prevent the vehicle from starting. The internal motor in the lock mechanism burns out or the control module loses communication with the BCM.

    Common Symptoms

    • No-start condition with push button
    • Steering wheel locked and will not release
    • NATS warning light illuminated

    How to Fix

    Replace the steering lock actuator assembly. Nissan issued a voluntary service campaign for some VINs covering this repair. Check with the dealer for coverage before paying out of pocket.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Genuine Infiniti steering-lock set D8700-JK000
      OEMD8700-JK000

      Exact early G37 steering-lock branch after system diagnosis and VIN confirmation Fitment/availability: Catalog fitment includes 2008-2012 G37 variants, but production and option differences remain. Confirm the VIN returns D8700-JK000, ve…

      InfinitiPartsDeal

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$300 - $1,000

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence

    On the 2008-2013 Infiniti G37, the hydraulic power steering circuit on the G37 develops leaks at the high-pressure hose, its crimped hard-line sections and the reservoir-side return hose as the rubber ages. Owners describe fluid coating the underside of the car, a whine from the pump when low, and difficulty pinpointing the source; some report repeated hose failures. Because the pressure line routes close to the exhaust and engine, heat accelerates the degradation.

    Common Symptoms

    • Power steering fluid dripping under the front of the car
    • Whining from the pump, especially when turning
    • Reservoir needs frequent topping up
    • Heavy steering when fluid runs low

    How to Fix

    Clean the area, pressurize and locate the leak, then replace the affected pressure hose/hard line (OEM or Gates/Edelmann equivalents around $130-150 in parts) and the return hose if soft; refill with the specified fluid and bleed. Persistent pump whine after a long dry spell may require pump replacement. No recall.

    Typical repair cost:$150 - $700

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Low ConfidenceVerifiedReviewed Sep 2026

    On the 2008-2013 Infiniti G37 3.7L VQ37VHR V6, manual transmission G37s suffer from premature concentric slave cylinder (CSC) failure. The internal seal degrades, causing clutch fluid to leak into the bell housing and resulting in a soft or sinking clutch pedal.

    Common Symptoms

    • Soft or spongy clutch pedal
    • Clutch pedal sinks to floor
    • Difficulty shifting gears
    • Clutch fluid level dropping

    How to Fix

    Replace the concentric slave cylinder, which unfortunately requires transmission removal. Many owners upgrade to an aftermarket CSC with improved seals. Flush the clutch hydraulic system after replacement.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • ZSpeed Billet CMAK V4 external slave-cylinder kit
      OEMZSP-CMAKB-370 — Billet CMAK V4

      G37 six-speed-manual CSC elimination repair path Fitment/availability: Select the 370Z/G37/G35S/Q60 configuration and confirm the installed clutch/fork setup.

      ZSpeed Performance
    • Z1 V2 CSC elimination kit
      OEMZ1 370Z/G37 V2 CSC elimination kit

      Alternative exact G37 six-speed external-slave conversion Fitment/availability: Fits the listed 2008-2013 G37 manual-transmission applications and requires selecting the clutch type. Do not order for an automatic or assume one configurat…

      Z1 Motorsports

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$800 - $2,000

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence

    On the 2008-2013 Infiniti G37 VQ37VHR, the FS6R31A 6-speed manual fitted to G37 Sport/6MT cars develops synchro grind, most often on 2nd, 5th and 6th (some report 3rd) during quick upshifts or when skipping gears. It is usually masked when shifting gently and shows up under spirited driving. Early in the car's life Infiniti replaced complete gearboxes under warranty—some owners report two or three replacements—while other dealers denied a known problem. The same brass synchro weakness is shared with the 370Z.

    Common Symptoms

    • Grinding or scratching when shifting into 2nd, 5th or 6th
    • Lockout or notchiness on fast upshifts
    • Grind worse when cold or when skipping gears

    How to Fix

    Within warranty, dealers replaced the transmission assembly. Out of warranty, options are a fluid change to a synchro-friendly GL-4 oil (which reduces but rarely eliminates grind), a rebuild with upgraded carbon synchros (Synchrotech kits are the common aftermarket path), or a used/remanufactured gearbox. No recall or extended coverage exists.

    Typical repair cost:$150 - $4,500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Sep 2026

    On the 2008 Infiniti G37, a varistor inside the Occupant Classification System control unit in the front passenger seat cushion was manufactured out of specification and can interrupt the signal between the OCS and the airbag control unit. When that signal is lost the airbag control unit suppresses the passenger frontal airbag, so it will not deploy in a crash even with an adult properly belted in the seat. NHTSA campaign 08V521000 covers the 2008 G37 Coupe together with 2007-2008 G35 sedans, EX35, and several Nissan models, totaling 204,361 vehicles. The recall began November 4, 2008.

    Common Symptoms

    • Passenger airbag status light reads OFF with an adult seated
    • Airbag status indicator flickers between ON and OFF
    • SRS warning light illuminated
    • Seat read as empty while occupied

    How to Fix

    Have the dealer test the OCS-to-ACU signal using the special tool specified in recall 08V521000 and replace the passenger seat cushion assembly if it fails, free of charge. Check the passenger airbag status light on the console with an adult in the seat — an OFF indication means the bag is suppressed right now. Remove aftermarket seat covers and clear anything stored beneath the passenger seat before diagnosis, as both confuse the sensor mat. Do not disconnect the OCS to extinguish the warning light; that disables the crash logic entirely.

    Typical repair cost:$0 - $0

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2008-2009 Infiniti G37, the dashboard topper material degrades under sustained sun and heat, first going soft and tacky, then developing shiny patches, cracks, and chipping — usually starting at the defroster vents and the instrument binnacle. The degraded surface turns reflective and throws glare onto the windshield severe enough to interfere with forward vision in low sun, which makes this a visibility problem rather than a purely cosmetic one. The defect is documented across 2008-2009 G37 alongside 2006-2008 G35 and M35 and was the subject of class-action litigation against Nissan. Nissan extended warranty coverage for melting dashboards on certain other vehicles but did not extend it to these models.

    Common Symptoms

    • Dashboard soft, tacky, or sticky to the touch
    • Shiny reflective patches causing windshield glare
    • Cracks and chipping near the defroster vents
    • Discoloration or bubbling of the dash surface
    • Glare obscuring forward vision in low sun

    How to Fix

    Expect this to be out of pocket, though one call to Infiniti Consumer Affairs with the VIN costs nothing and dealer goodwill has occasionally applied. Options in ascending cost: a fitted dash cover or carpet-style mat, which eliminates the glare for well under a hundred dollars and is where most owners land; a vinyl or leather re-wrap by a trim shop; or full dashboard replacement, expensive mainly because the labor requires pulling the steering column and HVAC ducting. Do not apply silicone-based interior dressings to a dash that has already gone soft — they worsen the tackiness and attract dust into the surface. Using a windshield sunshade whenever parked meaningfully slows the degradation on a dash that has not yet failed.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • 2008 Infiniti G37 custom polycarpet dash cover
      OEMCarCoverPlanet custom polycarpet dash cover — 2008 Infiniti

      2008 G37 Coupe glare-control branch Fitment/availability: Custom 2008 G37 Coupe pattern; select the exact speaker/cutout configuration and a dark color. There is no 2008 Sedan branch.

      CarCoverPlanet
    • 2009 Infiniti G37 fitted dashboard cover options
      OEMCoverlay 30224 family — 2009 Infiniti G37

      The live catalog includes a black Coverlay ABS cover with speaker cut-out; verify Coupe versus Sedan/Convertible fitment in the item notes before purchase and do not block airbag or def

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$60 - $2,500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2008-2009 Infiniti G37, separate from the melting dashboard, the painted/soft-touch coating on the steering wheel spokes and rim of 2008-2009 G37s (and 2007-2008 G35 sedans sharing the wheel) peels and chips, often before 50k miles. A 25-plus-page G35Driver thread and multiple MyG37 threads document owners getting the wheel replaced under warranty; Infiniti issued a bulletin acknowledging the defect but many cars were already out of warranty by then, and some dealers offered a repaint instead of replacement.

    Common Symptoms

    • Coating peeling off steering wheel spokes
    • Chipped or flaking finish on the rim
    • Sticky or worn feel on the wheel surface

    How to Fix

    Under warranty or goodwill, dealer replacement of the steering wheel assembly. Out of warranty, options are a replacement wheel from a later-year car (revised finish), leather re-wrap, or a professional refinish. No recall.

    Typical repair cost:$150 - $900

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Sep 2026

    On the 2008-2013 Infiniti G37, water entering the sunroof tray is meant to drain through four tubes routed down the A- and C-pillars. Debris blocks the drain nipples at the tray corners, the tray overflows, and water runs into the headliner and down the pillars into the cabin. Owners report soaked footwell carpet, water dripping from the headliner or map light, and a persistent musty smell. Because the water follows the pillars past wiring and body modules, it commonly surfaces as electrical faults first, and a car with unexplained module behavior and damp carpet is almost always leaking here rather than suffering an independent electrical failure. This is the leading cause of interior water intrusion on the chassis.

    Common Symptoms

    • Wet or damp footwell carpet
    • Water dripping from the headliner or map light area
    • Persistent musty or mildew smell
    • Unexplained electrical faults or modules behaving erratically
    • Water stains on pillar trim
    • Interior glass fogging that will not clear

    How to Fix

    Open the sunroof and find the drain openings at the four corners of the tray. Clear them with low-pressure compressed air or soft weed-trimmer line fed in gently. Never use a stiff wire or drain snake: it punctures the tube inside the pillar and turns a clogged drain into a permanent leak that is far harder to fix. Pour a little water into the tray and verify it exits behind each wheel. On a car with damp carpet, pull the carpet and padding up and dry them completely rather than letting them dry in place, since trapped moisture corrodes connectors and modules under the seats. Resolve this before diagnosing any electrical complaint on a wet car. If the leak continues with drains flowing freely, the sunroof seal has failed or a drain tube has come off its nipple behind the pillar trim.

    Typical repair cost:$0 - $900

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2008-2013 Infiniti G37, front hub bearings on the G37 (sedan, coupe and especially the heavier AWD G37x) fail well before most owners expect, typically between 50k and 90k miles. The symptom is a hum or drone above roughly 45-50 mph that changes pitch when the car is loaded in one direction (louder turning one way, quieter the other) and can be felt as vibration through the steering wheel. Owners report repeat failures and both sides eventually going.

    Common Symptoms

    • Humming or droning above 45-50 mph
    • Noise changes when steering left or right
    • Steering wheel vibration

    How to Fix

    Replace the complete hub/bearing assembly (the bearing is not serviced separately). It is a bolt-on unit and a common DIY job; dealers charge considerably more. Several owners had CPO coverage honor the repair. No recall.

    Typical repair cost:$200 - $700

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Sep 2026

    On the 2008-2011 Infiniti G37 VQ37VHR, early G37s develop coolant leaks from the upper radiator hose assembly and its plastic bleeder/connector fittings, which embrittle with age and heat and can split suddenly. Owners report sudden coolant loss and overheating warnings, dried coolant residue around the thermostat housing, and repeat leaks after a hose is replaced because the multi-piece OEM hose assembly has several joints. The plastic bleed port is repeatedly named as the weak point.

    Common Symptoms

    • Coolant puddle or sweet smell after driving
    • Low coolant or overheating warning
    • Dried coolant residue near the thermostat housing
    • Sudden loss of coolant from a split hose

    How to Fix

    Replace the upper radiator hose assembly (OEM is a three-piece assembly, roughly $100 in parts) including the plastic bleed fitting; inspect the lower hose and pressure-test the system to rule out a cracked radiator. Bleed the cooling system properly afterward. No recall.

    Typical repair cost:$100 - $500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Low ConfidenceVerifiedReviewed Sep 2026

    On the 2008-2013 Infiniti G37, g37 fuel gauges commonly read wrong as the cars age: the needle sticks at half or full, drops suddenly, or the low-fuel light comes on with fuel remaining. The saddle-style tank uses a main and sub level sensor; wear on the float-arm resistor track in either sender produces erratic readings. Because the fuel data passes through the body/AC control electronics before the cluster, owners have chased wiring and even module faults after replacing a sender. There is no known TSB, but the fault is well documented across MyG37 and G35Driver.

    Common Symptoms

    • Fuel gauge stuck at half or full
    • Gauge reading drops suddenly
    • Low fuel light with fuel remaining
    • Range display inaccurate

    How to Fix

    Read the sender resistance (roughly 3 ohms full to ~80 ohms empty on the main sender, ~41 ohms empty on the sub) and replace the worn fuel level sensor unit(s) through the rear-seat access panel; verify harness connections to the cluster if readings remain wrong. No recall.

    Typical repair cost:$100 - $500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Sep 2026

    On the 2008-2013 Infiniti G37, owners across model years report the G37's air conditioning gradually blowing warm as refrigerant escapes, most often from the compressor shaft seal, the high-pressure service fitting or cutoff-switch O-rings, and occasionally the condenser. The system holds only about 1.1 lb of R-134a, so a small leak empties it quickly and the compressor clutch stops engaging on low pressure. CarComplaints lists 'A/C blowing warm air' among the top 2013 G37 problems at roughly $2,800 average repair cost.

    Common Symptoms

    • A/C blows warm or only cools briefly
    • Compressor clutch does not engage
    • Oily residue on compressor or high-side fitting
    • Refrigerant needs recharging repeatedly

    How to Fix

    UV-dye leak test; replace the leaking compressor (with receiver/drier and expansion valve), fitting O-rings or condenser as found, evacuate and recharge to the specified 1.1 lb charge—overcharging causes poor cooling. Confirm the clutch relay and pressure switch before condemning the compressor. No recall.

    Typical repair cost:$150 - $2,800

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Sep 2026

    On the 2008-2013 Infiniti G37, on Bose-equipped G37s the trunk-mounted amplifier is the most common audio failure. Sound cuts out entirely or intermittently with no error on screen—the head unit, navigation and controls keep working, but nothing comes from the speakers. Owner diagnosis on G35Driver and MyG37 starts with the BOSE AMP fuse and the head-unit self-diagnostic, which shows the amp not communicating; internal solder-joint failure is the usual root cause.

    Common Symptoms

    • No sound from any speaker while the head unit works
    • Audio cuts in and out
    • Self-diagnostic shows amplifier not responding

    How to Fix

    Confirm the BOSE AMP fuse and run the head-unit self-diagnostic. Replace the amplifier (used units are inexpensive; new OEM is several hundred dollars) or have the original board repaired; some owners bypass with an aftermarket amp. No recall.

    Typical repair cost:$100 - $800

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Sep 2026
    NHTSA Recalls1 recall

    VISIBILITY:POWER WINDOW DEVICES AND CONTROLS

    NISSAN IS RECALLING CERTAIN MODEL YEAR 2011 AND 2012 INFINITI G37 COUPE VEHICLES AND CERTAIN MODEL YEAR 2011 NISSAN 370Z VEHICLES MANUFACTURED FROM JULY 2, 2011, THROUGH AUGUST 29, 2011. DUE TO A PROGRAMMING ERROR, THE POWER WINDOW SWITCH CONTROLLER IN THE SUBJECT VEHICLES WAS MANUFACTURED OUT OF SPECIFICATION.

    Campaign #11V53800004/11/2011

    Enter your VIN at NHTSA.gov to check recalls specific to your vehicle.

    🔧
    A mechanic who knows YOUR exact car
    Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
    Get ahead of Infiniti G37 problems — free
    Leave your email and we'll alert you the moment there's a new recall or known issue for your Infiniti G37. Free, no account needed.

    Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.

    Other Infiniti Models

    Infiniti FX3520Infiniti Q5011Infiniti G3511Infiniti QX508Infiniti QX558Infiniti QX608

    Frequently Asked Questions

    What are the most common Infiniti G37 problems?

    According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2008 Infiniti G37 has 20 documented issues. The most frequently reported are: OCS Varistor Defect Suppresses Passenger Airbag (Recall 08V521000), VVEL Actuator and Control Module Failure Causing Limp Mode, Timing Chain Stretch and Guide Wear on VQ37VHR. Of these, 8 are rated critical and should be addressed promptly.

    Is the Infiniti G37 reliable?

    The 2008 Infiniti G37 has 20 known issues compiled from NHTSA recalls, manufacturer TSBs, and owner forum reports. 8 issues are rated critical: OCS Varistor Defect Suppresses Passenger Airbag (Recall 08V521000) and VVEL Actuator and Control Module Failure Causing Limp Mode and Timing Chain Stretch and Guide Wear on VQ37VHR and Oil Gallery Gasket Leak and Electronic Steering Lock Failure and Concentric Slave Cylinder Failure (Manual) and Crankshaft Position Sensor Failure Causing Hot Stall and No-Start (P0335) and Cam Cover Gasket Leak Causing Low Oil Pressure. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

    How much does it cost to fix common Infiniti G37 problems?

    Repair costs for known Infiniti G37 issues range from $0 to $4,500, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, OCS Varistor Defect Suppresses Passenger Airbag (Recall 08V521000), typically costs $0-$0 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

    What is the 2008 Infiniti G37 OCS Varistor Defect Suppresses Passenger Airbag (Recall 08V521000)?

    A varistor inside the Occupant Classification System control unit in the front passenger seat cushion was manufactured out of specification and can interrupt the signal between the OCS and the airbag control unit. When that signal is lost the airbag control unit suppresses the pa… Repairs typically run $0-$0. Severity: high.

    What is the 2008-2013 Infiniti G37 VVEL Actuator and Control Module Failure Causing Limp Mode?

    The VQ37VHR uses Variable Valve Event and Lift, a mechanical system on the intake side that varies lift continuously through an actuator motor driving a control shaft, managed by its own control module. When the actuator motor, the control shaft position sensor, or the VVEL modul… Repairs typically run $600-$3,000. Severity: high.

    What is the 2008-2013 Infiniti G37 Timing Chain Stretch and Guide Wear on VQ37VHR?

    The VQ37VHR runs three timing chains — a primary and two secondaries — with plastic guides and hydraulic tensioners. The chains stretch and the guides wear, and because the tensioners rely on oil pressure to take up slack, any oil pressure loss or extended change interval acceler… Repairs typically run $1,800-$4,000. Severity: high.

    What is the 2008-2013 Infiniti G37 Oil Gallery Gasket Leak?

    The VQ37VHR engine develops oil leaks from the oil gallery gaskets located between the upper and lower oil pans. Oil seeps onto the exhaust, creating a burning smell and potential fire hazard if left unaddressed. Repairs typically run $400-$1,200. Severity: high.

    What is the 2008-2013 Infiniti G37 Electronic Steering Lock Failure?

    Like the G35, the G37 suffers from electronic steering wheel lock actuator failures that prevent the vehicle from starting. The internal motor in the lock mechanism burns out or the control module loses communication with the BCM. Repairs typically run $300-$1,000. Severity: high.

    What is the 2008-2013 Infiniti G37 Concentric Slave Cylinder Failure (Manual)?

    Manual transmission G37s suffer from premature concentric slave cylinder (CSC) failure. The internal seal degrades, causing clutch fluid to leak into the bell housing and resulting in a soft or sinking clutch pedal. Repairs typically run $800-$2,000. Severity: high.

    What is the 2008-2013 Infiniti G37 Crankshaft Position Sensor Failure Causing Hot Stall and No-Start (P0335)?

    The crankshaft position sensor mounted on the transmission bell housing of the VQ37VHR is a documented failure point on G37s past about 80k miles. It typically fails when hot: the engine stalls after warm-up or extended driving, cranks without starting until it cools, then restar… Repairs typically run $80-$350. Severity: high.

    What is the 2008-2011 Infiniti G37 Cam Cover Gasket Leak Causing Low Oil Pressure?

    On pre-2012 VQ37VHR engines the cam cover gaskets fail and leak, and unlike an ordinary valve cover weep this one matters mechanically: the leak path bleeds down oil pressure feeding the top end. Low oil pressure on this engine starves the VVEL assembly and the cam and rod bearin… Repairs typically run $400-$1,400. Severity: high.

    What is the 2008-2013 Infiniti G37 Ignition Coil Blistering and Failure Causing Cylinder Misfire (P0300-P0306)?

    The Hitachi coil-on-plug units on the VQ37VHR are a recurring failure item on higher-mileage G37s. Heat and electrical stress cause the coil body to blister or bulge, producing a random or single-cylinder misfire, rough idle and flashing check-engine light. Infiniti's bulletin IT… Repairs typically run $150-$900. Severity: medium.

    What is the 2008-2009 Infiniti G37 Dashboard Melts, Turns Sticky, and Cracks Causing Windshield Glare?

    The dashboard topper material degrades under sustained sun and heat, first going soft and tacky, then developing shiny patches, cracks, and chipping — usually starting at the defroster vents and the instrument binnacle. The degraded surface turns reflective and throws glare onto… Repairs typically run $60-$2,500. Severity: medium.

    What is the 2008-2010 Infiniti G37 VQ37VHR Excessive Oil Consumption on Early Engines?

    Early-production VQ37VHR engines consume noticeably more oil than owners expect, and the 2008-2010 build years are the most affected. The consumption is real rather than imagined leakage, driven by ring and cylinder wear characteristics on early blocks, and it is aggravated by ha… Repairs typically run $100-$3,500. Severity: medium.

    What is the 2008-2013 Infiniti G37 Clogged Sunroof Drains Causing Cabin Water Leaks and Electrical Faults?

    Water entering the sunroof tray is meant to drain through four tubes routed down the A- and C-pillars. Debris blocks the drain nipples at the tray corners, the tray overflows, and water runs into the headliner and down the pillars into the cabin. Owners report soaked footwell car… Repairs typically run $0-$900. Severity: medium.

    What is the 2008-2013 Infiniti G37 6-Speed Manual Synchronizer Wear Causing Grind into 2nd, 5th and 6th Gear?

    The FS6R31A 6-speed manual fitted to G37 Sport/6MT cars develops synchro grind, most often on 2nd, 5th and 6th (some report 3rd) during quick upshifts or when skipping gears. It is usually masked when shifting gently and shows up under spirited driving. Early in the car's life In… Repairs typically run $150-$4,500. Severity: medium.

    What is the 2008-2013 Infiniti G37 Front Wheel Hub Bearing Failure Causing Speed-Dependent Hum?

    Front hub bearings on the G37 (sedan, coupe and especially the heavier AWD G37x) fail well before most owners expect, typically between 50k and 90k miles. The symptom is a hum or drone above roughly 45-50 mph that changes pitch when the car is loaded in one direction (louder turn… Repairs typically run $200-$700. Severity: medium.

    What is the 2008-2011 Infiniti G37 Radiator Hose and Plastic Coolant Bleed Fitting Failure Causing Coolant Loss and Overheating?

    Early G37s develop coolant leaks from the upper radiator hose assembly and its plastic bleeder/connector fittings, which embrittle with age and heat and can split suddenly. Owners report sudden coolant loss and overheating warnings, dried coolant residue around the thermostat hou… Repairs typically run $100-$500. Severity: medium.

    What is the 2008-2013 Infiniti G37 Power Steering High-Pressure Hose and Hard-Line Leaks?

    The hydraulic power steering circuit on the G37 develops leaks at the high-pressure hose, its crimped hard-line sections and the reservoir-side return hose as the rubber ages. Owners describe fluid coating the underside of the car, a whine from the pump when low, and difficulty p… Repairs typically run $150-$700. Severity: medium.

    What is the 2008-2009 Infiniti G37 Steering Wheel Trim Coating Peeling and Chipping on 2008-2009 Cars?

    Separate from the melting dashboard, the painted/soft-touch coating on the steering wheel spokes and rim of 2008-2009 G37s (and 2007-2008 G35 sedans sharing the wheel) peels and chips, often before 50k miles. A 25-plus-page G35Driver thread and multiple MyG37 threads document own… Repairs typically run $150-$900. Severity: low.

    What is the 2008-2013 Infiniti G37 Fuel Level Sending Unit Wear Causing Inaccurate or Stuck Fuel Gauge?

    G37 fuel gauges commonly read wrong as the cars age: the needle sticks at half or full, drops suddenly, or the low-fuel light comes on with fuel remaining. The saddle-style tank uses a main and sub level sensor; wear on the float-arm resistor track in either sender produces errat… Repairs typically run $100-$500. Severity: low.

    What is the 2008-2013 Infiniti G37 A/C Compressor Shaft-Seal and High-Side Fitting Refrigerant Leaks Causing Warm Air?

    Owners across model years report the G37's air conditioning gradually blowing warm as refrigerant escapes, most often from the compressor shaft seal, the high-pressure service fitting or cutoff-switch O-rings, and occasionally the condenser. The system holds only about 1.1 lb of… Repairs typically run $150-$2,800. Severity: low.

    What is the 2008-2013 Infiniti G37 Bose Trunk-Mounted Amplifier Failure Causing Total or Intermittent Loss of Audio?

    On Bose-equipped G37s the trunk-mounted amplifier is the most common audio failure. Sound cuts out entirely or intermittently with no error on screen—the head unit, navigation and controls keep working, but nothing comes from the speakers. Owner diagnosis on G35Driver and MyG37 s… Repairs typically run $100-$800. Severity: low.

    Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.

    Data compiled from NHTSA recalls, manufacturer TSBs, automotive forums, and AI-assisted research. No aggregated owner-report counts available for this vehicle yet.