Au7o mascotAu7o
Known IssuesTest Hub demo
  1. Au7o
  2. /
  3. Known Issues
  4. /
  5. Ford
  6. /
  7. Focus
Ford · Known Issues

2015 Ford Focus Problems: 13 Known Issues

2015 model year · 24,886+ owner reports · Updated September 2026

Share:@au7o.io

2015 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

Known IssuesMotorcycle IssuesDTC LookupDrivePricingAboutTermsPrivacyCookiesConsentData rightsCopyrightFeedback
Share:@au7o.io

Vehicle data and repair guidance on this site are compiled with AI assistance and may contain errors. Always verify with your service manual or a qualified mechanic.

Data protection representation

DataRep representative in the United KingdomDataRep representative in the European Union
Au7o · 2026
Built for DIY mechanics. Privacy-first.
Explore free Hub demo
No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example
Issue summary

According to Au7o's analysis of 24,886+ owner reports, the 2015 Ford Focus has 13 documented known issues, with 5 rated critical. The most serious are DPS6 PowerShift Dual-Clutch Transmission Shudder, Hesitation, and Failure ($0-$4,500 repair), Side Door Latch Failure - Door Opening While Driving (Recall 16V643) ($0-$0 repair), DPS6 Transmission Control Module (TCM) Internal Electronic Failure - Sudden No-Shift / Loss of Motive Power ($0-$1,400 repair), Focus Electric High-Voltage Battery Contactor Failure - Vehicle Will Not Charge ($600-$3,000 repair) and Electric Power Assist Steering (EPAS) Rack/Motor-Sensor Failure - "Power Steering Assist Fault" Message ($900-$2,500 repair). The most commonly reported issue is DPS6 PowerShift Dual-Clutch Transmission Shudder, Hesitation, and Failure with 18,500 owner reports. Across all issues with published estimates, repair costs range from $30 to $4,500. DIY maintenance guides at au7o.io.

In This Article

  • Focus Transmission2
  • Focus Electrical4
  • Focus Safety/Recalls1
  • Focus Steering1
  • Focus Engine4
  • Focus Fuel System1
  • Recalls20
  • FAQ
Get Started
Back to top

In This Article

  • Transmission2
  • Electrical4
  • Safety/Recalls1
  • Steering1
  • Engine4
  • Fuel System1
  • Recalls20
  • FAQ

    • All 13 Known Issues

    Filter:
    ALL YEARS2018201720162015201420132012201120102009200820072006200520042003200220012000
    Community reported
    18,500 owners

    On the 2012-2018 Ford Focus, the DPS6 PowerShift 6-speed dual-clutch automated transmission fitted to 2012-2018 Ford Focus (and 2011-2019 Fiesta) is widely considered one of the worst transmission designs in modern automotive history. The dry dual-clutch design was fundamentally unsuited for stop-and-go driving, producing violent shuddering during low-speed acceleration, hesitation when pulling away from stops, unexpected surging, and abrupt harsh shifts. Ford knew of the defects from the start but concealed them and continued selling vehicles. Multiple class action lawsuits resulted in settlements covering 2012-2016 models (expanded to 2017-2018). Ford issued dozens of TSBs and software reflashes that repeatedly failed to fix the underlying mechanical problem. The TCM (Transmission Control Module) failures are a distinct but related issue. Repair options include clutch replacement (temporary fix), TCM reprogramming, or complete transmission replacement.

    Common Symptoms

    • Violent shuddering or juddering when accelerating from a stop
    • Transmission hesitates or refuses to move in Drive for 1-3 seconds
    • Unexpected lurch forward when releasing brakes at low speed
    • Grinding or clunking between gear changes
    • Transmission surging and jerking during low-speed driving
    • Vehicle bucks and shakes at 15-35 mph (clutch slip zone)
    • Transmission warning light or "Transmission Fault" message
    • Loss of drive in one or both gears
    • Delayed engagement from Park to Drive

    How to Fix

    Check fordtransmissionsettlement.com for class action settlement eligibility. Ford's warranty extended to cover repeated repairs. Updated clutch service parts: Focus uses F1FZ-7B546-B clutch (replaces BV6Z-7B546-F). TCM repair/replacement per TSB 16-0109. Software recalibration via IDS tool at dealer. For definitive fix: remanufactured DPS6 transmission. Many owners chose to pursue buyback via state Lemon Laws. Latest settlements include 2017-2018 models under separate class action.

    Typical repair cost:$0 - $4,500

    Research This Issue

    Based on 18,500 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence18,500 owner reportsLast reported by owners Dec 2025Reviewed Feb 2026

    On the 2012-2016 Ford Focus, separate from the clutch shudder that made the PowerShift famous, the DPS6's mechatronic Transmission Control Module - the electronic unit that drives the two shift actuators inside the case - suffers its own solder-joint and internal circuit failures. Failure is usually abrupt rather than progressive: the cluster throws "Transmission Malfunction - Service Now", the car drops out of gear, refuses to shift, or will not move at all, sometimes from highway speed. Clutch actuator control circuit codes (P0902, P090C, P2872, P0910/P0911) are the giveaway. Ford issued Field Service Action 15B22 (TCM reprogramming) and extended TCM coverage to 10 years / 150,000 miles under customer satisfaction programs, which is why so many owners get a TCM replaced at no charge.

    Common Symptoms

    • Transmission Malfunction - Service Now warning
    • Car suddenly will not move or drops out of gear
    • Stuck in one gear / limp mode
    • No reverse
    • Wrench light on dash

    How to Fix

    Pull the transmission codes before anything else - actuator control-circuit codes point at the TCM rather than the clutch pack. Check for the extended TCM coverage (10yr/150k) and for Field Service Action 15B22 reprogramming by VIN before paying out of pocket. Also inspect the front-of-engine transmission wiring harness (TSB 14-0215) for chafing that mimics TCM failure. The repair is TCM replacement and programming to the vehicle.

    Typical repair cost:$0 - $1,400

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2012-2018 Ford Focus 23 kWh / 33.5 kWh HV battery (BEV), on the battery-electric Focus, the high-voltage pack's main positive and negative contactors (relays) fail - either welding stuck closed or burning their contacts open. When a contactor faults, the on-board charger cannot close the HV circuit, so the car reports a charging fault, refuses to accept AC from either the 120V convenience cord or a 240V EVSE, and may throw HV isolation faults. Owners on the Focus Electric community have traced dead-charge conditions to burnt contactors in the upper pack, sometimes alongside coolant intrusion into the pack, and Ford also issued service information for HV packs that will not charge on the second-generation 120V charge cord.

    Common Symptoms

    • Vehicle will not charge on 120V or 240V
    • Charge port light does not illuminate or flashes an error
    • Stop Safely Now or high-voltage warning message
    • Unlocking charge cord message on the display
    • Loss of range or no propulsion

    How to Fix

    Diagnose with the HV pack DTCs before replacing the charge cord or the on-board charger - a stuck or open contactor sets specific battery energy control module codes. The repair is replacement of the affected contactor inside the HV battery pack, which requires a high-voltage-qualified technician (pack de-energizing, isolation testing, coolant loop handling). If the pack shows coolant intrusion, that leak must be repaired or the replacement contactor fails again. Also verify the EVSE and its charge-cord software level, since the factory second-generation 120V cord has its own no-charge service fix.

    Typical repair cost:$600 - $3,000

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2012-2018 Ford Focus, the washer reservoir and pump seal leaks, and washer fluid runs down the pump's wiring. Capillary action carries the fluid inside the wire insulation the full length of the harness to the BCM connector in the passenger footwell, where it corrodes the pins and the module itself. The result is a car full of unrelated electrical faults - flickering lights, dead windows and locks, random warning messages, phantom battery drain overnight, and eventually a no-start. Replacing the BCM without fixing the leak and the wet harness simply kills the new module, which is why owners often go through two.

    Common Symptoms

    • Battery drains overnight
    • Random warning messages on the dash
    • Power windows or door locks stop working
    • Interior and exterior lights flicker
    • Intermittent no-start
    • Washer fluid disappears or pools under the front of the car

    How to Fix

    Find and stop the leak first: replace the washer pump/grommet (and the reservoir if cracked) with the updated design. Then cut back and replace the wetted section of harness - the corroded wire must be removed, not just dried, because fluid travels inside the insulation. Clean or replace the BCM connector, and only then replace and program the BCM if it is confirmed dead. Check for the classic parasitic draw before condemning the battery or alternator.

    Typical repair cost:$250 - $1,200

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2012-2016 Ford Focus, the Accessory Protocol Interface Module (APIM) behind the center stack runs MyFord Touch / SYNC 2. Its internal flash memory and processor board fail, producing a permanently black screen, endless reboot cycles, freezing, or a system that boots but loses audio and the rear-view camera image. The touchscreen panel itself is usually fine - the module is the failure. Because the Focus routes climate display, camera, and audio through the head unit, an APIM failure takes out the backup camera, which is a safety item. Ford extended warranty coverage on the module under field service action 12M02 for affected vehicles.

    Common Symptoms

    • Center touchscreen is black but the car runs normally
    • System reboots repeatedly while driving
    • Screen freezes on the Ford logo
    • No audio from any source
    • Backup camera image does not display
    • Climate or navigation controls unresponsive on screen

    How to Fix

    Try a hard reset first (pull the APIM/radio fuse for five minutes, then a master reset from the settings menu) and check for the latest SYNC software update, since some blank-screen and reboot cases come from corrupted phonebook data or a failed update. If the module is truly dead, it must be replaced and programmed to the vehicle's VIN and option content - dealer, a pre-programmed used unit, or a DIY reflash with FORScan. Check field service action 12M02 eligibility by VIN before paying.

    Typical repair cost:$300 - $1,200

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2008-2018 Ford Focus, the Focus door ajar switch integrated into the door latch assembly fails, causing the dash to display a door ajar warning when all doors are closed. This also keeps the interior dome lights on, which drains the battery overnight. The latch switch corrodes or wears out, sending a false open signal to the body control module. Any of the four doors can be affected, though the driver door is most common.

    Common Symptoms

    • Door ajar warning on dash with all doors closed
    • Interior lights stay on after locking
    • Battery drain overnight
    • Door ajar chime sounds while driving
    • Alarm triggered by false door open signal

    How to Fix

    Replace the door latch assembly containing the failed ajar switch. OEM latch assemblies cost $50-100; aftermarket versions are $30-60. Replacement takes 30-60 minutes and requires removing the door panel. As a temporary fix, the interior light fuse can be pulled to prevent battery drain, or the dome light switch can be set to the off position. Spraying WD-40 into the latch mechanism can temporarily restore the switch contact but is not a permanent fix.

    Typical repair cost:$30 - $200

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence
    Community reported
    2,046 owners

    On the 2012-2015 Ford Focus, the 2012-2015 Ford Focus is included in Ford's massive door latch recall (16V643 / 14S17) covering 2.38 million vehicles. The pawl spring tab inside the side door latches can fracture, particularly in hot and humid climates. A fractured pawl spring tab causes the door to fail to properly latch, or to open unexpectedly while driving. Ford identified this as a safety defect after reports of accidents and injuries. All four door latches on affected vehicles may be defective. The condition is insidious because the door may appear to close normally while the latch pawl spring is already cracked.

    Common Symptoms

    • Door does not latch when attempting to close (bounces back)
    • Door ajar warning light on with door apparently shut
    • Door opens while vehicle is in motion
    • Unusual wind noise from a door that should be closed
    • Door latch sounds or feels different when closing

    How to Fix

    Ford Safety Recall 16V643 / 14S17 - dealers replace all affected side door latches at no charge, no mileage limit. Check safercar.gov or fordowner.com with VIN to verify recall status. Even if the car has changed ownership, recall repairs are always free regardless of current owner. Ford also issued subsequent recalls (16S30, 19V171) for additional vehicles with the same root cause.

    Typical repair cost:$0 - $0

    Research This Issue

    Based on 2,046 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence2,046 owner reportsLast reported by owners Jun 2025Reviewed Feb 2026

    On the 2012-2016 Ford Focus, the 2012 Mk3 Focus was the first Focus with a fully electric rack-mounted power steering assist (EPAS). The torque/position sensor and motor assembly inside the rack, and the power steering control module (PSCM) integrated with it, fail intermittently - often heat-soaked on long drives or hot days. The dash shows "Power Steering Assist Fault - Service Now", the wheel goes heavy with no warning, and steering no longer self-centers. Failures are frequently intermittent at first (assist returns after a key cycle) and then become permanent. Because the assist motor is integral to the rack, Ford's repair is a complete steering gear replacement. Unlike the Fusion/Taurus/Flex family, which got NHTSA recall 15V340 for the same motor-sensor defect, the Focus was never recalled despite hundreds of NHTSA complaints, and was instead the subject of a class-action suit covering 2012-2014 Focus and Focus Electric.

    Common Symptoms

    • Power Steering Assist Fault - Service Now message
    • Steering suddenly becomes very heavy while driving
    • Assist comes back after restarting the car
    • Steering does not return to center after a turn
    • Fault appears more often on hot days or after long drives

    How to Fix

    Scan the PSCM for stored codes first (low battery voltage and corroded connectors at the rack can mimic the fault). If EPAS-internal codes are present, Ford's only repair is replacement of the complete electric steering gear assembly and PSCM software programming; some cars are fixed by a PSCM reflash alone when no hard codes are stored. Verify battery and alternator output before condemning the rack, since low system voltage will drop assist and set the same message.

    Typical repair cost:$900 - $2,500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026
    Community reported
    1,240 owners

    On the 2012-2018 Ford Focus, the 2.0L GDI (Gasoline Direct Injection) and 2.0L EcoBoost engines in 2012-2018 Ford Focus accumulate carbon deposits on the intake valves over time because direct injection fuel never washes over the valve faces. Oil vapors from the PCV system coat the intake valves and harden into carbon deposits over 60,000-100,000 miles. As deposits build up, they restrict airflow, cause rough idle, misfires, and reduced power. This is a maintenance issue inherent to all direct-injection engines (BMW, VW, Ford, etc.) and is not covered under warranty except in severe cases. The only effective permanent repair is walnut blasting the intake valves.

    Common Symptoms

    • Rough idle, especially when cold
    • Misfires at idle or low load (P0300-P0304 codes)
    • Loss of power and throttle response, particularly at low RPM
    • Poor fuel economy (5-15% reduction)
    • Hesitation on light throttle application
    • Engine shaking or vibration at idle
    • Symptoms worsen progressively over many miles

    How to Fix

    Walnut blasting (media blasting of intake valves with crushed walnut shells) is the most effective solution, costing $400-$800 at shops familiar with the procedure. DIY walnut blasting adapters for the 2.0L EcoBoost are available from US Vet Designs. Installing an oil catch can (PCV oil separator) on the intake tract reduces future buildup. Use top-tier gasoline (Chevron, Shell V-Power, Costco) which contains enhanced deposit control additives. Service interval: walnut blast every 40,000-60,000 miles.

    Typical repair cost:$400 - $900

    Research This Issue

    Based on 1,240 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence1,240 owner reportsLast reported by owners Oct 2025Reviewed Feb 2026

    On the 2012-2018 Ford Focus, the Mk3 Focus uses a three-mount layout: a fluid-filled hydraulic mount on the passenger side, a solid transmission mount on the driver side, and a rear torque strut ("dogbone"). The passenger-side hydraulic mount is the weak link - the rubber cracks, the damping fluid leaks out, and the mount can no longer absorb the engine's second-order shake. Owners feel a coarse vibration through the steering wheel, seat, and pedals at idle, worst in Drive at a stoplight and when the A/C compressor cycles. Many owners chase this as an engine or transmission fault first. A related but distinct complaint is rocks and road debris packing into the rear torque strut mount, which produces a clunk or vibration in reverse and is cured by cleaning it out and fitting a shield.

    Common Symptoms

    • Strong vibration at idle felt in the steering wheel and seat
    • Vibration worse in Drive at a stop and when A/C is on
    • Clunk or thud when shifting into gear or accelerating
    • Visible cracks or wet fluid on the passenger side engine mount
    • Vibration in reverse

    How to Fix

    Inspect the passenger-side mount with the engine running: pressing the rubber will often push out damping fluid, and cracks appear in the rubber ring. Replace with an OEM Motorcraft hydraulic mount - solid or polyurethane aftermarket mounts increase idle vibration on a daily driver. Check the rear torque strut for packed debris and for split bushings at the same time, and re-check idle quality afterward, since a rough idle from a failing purge valve or misfire will otherwise be blamed on mounts.

    Typical repair cost:$180 - $450

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2012-2018 Ford Focus, the Mk3 four-cylinders use an RTV-sealed aluminum front cover rather than a gasket. The RTV bead fails at the cover-to-block joint and around the variable cam timing (VCT) solenoid bores, letting oil weep down the front of the block onto the subframe and, on the ST, onto the turbo area where it smokes. Owners commonly report a quart lost every 2,000-3,000 miles with no smoke and no coolant contamination, and Ford technicians name front cover leaks (with lower control arm bushings) as the single most frequent Mk3 warranty complaint. Some cars have leaked at under 25,000 miles.

    Common Symptoms

    • Oil drips under the front of the engine
    • Burning oil smell after driving
    • Low oil level between changes with no smoke
    • Oil film on the subframe, belt, or turbo area
    • Wet oil residue around the VCT solenoids on the valve cover

    How to Fix

    Clean the area and dye-test to distinguish the front cover from the far cheaper valve cover / VCT solenoid seals - a leaking VCT solenoid seal is fixed with an OEM valve cover gasket set and new solenoid O-rings. A true front cover leak requires pulling the accessory drive and crank pulley, locking the timing with the Ford cam/crank tool set, removing the cover, cleaning all old RTV, and resealing with Ford-spec anaerobic/RTV sealant plus new diamond washers on the crank pulley. Because the timing must be broken, this is a labor-heavy job and should be done with a new front crank seal.

    Typical repair cost:$600 - $1,600

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2013-2018 Ford Focus 2.0L EcoBoost, on the 2.0L EcoBoost Focus ST the plastic charge pipe couplers between the turbo, front-mount intercooler, and throttle body are held by spring clamps and blow off or work loose under sustained boost, especially after any tune or intercooler change. The stock bypass/blow-off valve diaphragm and the sound symposer diaphragm also split, venting charge air. The result is an abrupt loss of thrust, a loud whoosh or pop under acceleration, limp mode, and boost-pressure DTCs. Driving with a large boost leak makes the turbo overspeed while the ECU chases a target it cannot hit, so it is not a cosmetic complaint.

    Common Symptoms

    • Sudden loss of power under acceleration
    • Loud whoosh, hiss, or pop from the engine bay under boost
    • Check engine light with boost codes
    • Limp mode
    • Poor fuel economy
    • Rough idle after the pipe blows off

    How to Fix

    Pressurize the intake tract with a boost-leak tester at roughly 15-20 psi and listen: the coupler at the base of the throttle body, the intercooler outlet hose, and the bypass valve are the usual sources. Re-seat and upgrade the clamps to T-bolt clamps, replace a split BPV diaphragm (or fit a stronger aftermarket bypass valve), and inspect or delete the symposer diaphragm. Confirm the charge pipe was not simply pushed off after intercooler or intake work.

    Typical repair cost:$60 - $450

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026
    Community reported
    3,100 owners

    On the 2012-2018 Ford Focus 2.0L GDI, the 2012-2018 Ford Focus with the 2.0L GDI engine experiences frequent canister purge valve (CPV) failures that cause rough idle, stalling, difficulty starting (especially after refueling), and fuel-related DTCs. The purge valve sticks open, allowing fuel vapors to flood the intake manifold at inappropriate times. This is separate from the carbon buildup issue and is one of the most commonly replaced components on the 2012-2018 Focus. Ford issued TSBs addressing the issue and released updated purge valve designs. The problem affects both manual and automatic (PowerShift) transmission models. Focus Fanatics Forum documents this as one of the top five most-replaced parts on the Mk3 Focus.

    Common Symptoms

    • Rough idle or engine surging at idle
    • Engine stalling after starting, especially after refueling
    • Difficulty starting the engine (extended crank time)
    • Check engine light with EVAP system codes
    • Fuel smell from engine bay
    • Hesitation during acceleration from a stop
    • Engine runs rich (black exhaust smoke)

    How to Fix

    Replace the canister purge valve (Motorcraft CX-2571 or equivalent, $30-60 part). The valve is located on top of the engine near the intake manifold and is a 15-30 minute DIY job. Use the updated Ford part number to avoid repeat failures. Clear all stored codes after replacement and drive through one complete drive cycle to verify the fix. If codes P0452/P0453 persist after purge valve replacement, the fuel tank pressure sensor may also need replacement.

    Typical repair cost:$80 - $250

    Research This Issue

    Based on 3,100 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium Confidence3,100 owner reportsLast reported by owners Feb 2026Reviewed Feb 2026
    NHTSA Recalls20 recalls

    FUEL SYSTEM, GASOLINE:STORAGE

    Ford Motor Company (Ford) is recalling certain 2012-2018 Ford Focus vehicles with a 2.0L GDI or 2.0L GTDI engine. The Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in fuel vapor management system.

    Campaign #18V73500022/10/2018

    POWER TRAIN:MANUAL TRANSMISSION

    Ford Motor Company (Ford) is recalling certain 2016-2018 Ford Focus vehicles equipped with a 1.0L Fox GTDI engine and a 6-speed manual transmission. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.

    Campaign #18V84500028/11/2018

    ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PUMP

    Ford Motor Company (Ford) is recalling certain 2016-2018 Ford Focus and 2018-2022 Ford EcoSport vehicles. The oil pump drive belt or drive belt tensioner may fail, resulting in a loss of engine oil pressure.

    Campaign #23V90500022/12/2023

    EQUIPMENT:ELECTRICAL:ENGINE BLOCK HEATER

    Ford Motor Company (Ford) is recalling certain 2013-2018 Focus, 2013-2019 Escape, and 2015-2016 MKC vehicles equipped with a 2.0L engine. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.

    Campaign #26V01100015/01/2026

    EQUIPMENT:ELECTRICAL:ENGINE BLOCK HEATER

    Ford Motor Company (Ford) is recalling certain 2016-2018 Focus, 2019 Explorer, and 2024 Explorer vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.

    Campaign #26V01200015/01/2026

    + 15 more recalls. Check all on NHTSA.gov

    Enter your VIN at NHTSA.gov to check recalls specific to your vehicle.

    🔧
    A mechanic who knows YOUR exact car
    Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
    Get ahead of Ford Focus problems — free
    Leave your email and we'll alert you the moment there's a new recall or known issue for your Ford Focus. Free, no account needed.

    Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.

    Other Ford Models

    Ford F-15094Ford Explorer73Ford Escape48Ford Mustang46Ford Fiesta32Ford Bronco32

    Frequently Asked Questions

    What are the most common Ford Focus problems?

    According to Au7o's analysis of 24,886+ owner reports, the 2015 Ford Focus has 13 documented issues. The most frequently reported are: DPS6 PowerShift Dual-Clutch Transmission Shudder, Hesitation, and Failure, Side Door Latch Failure - Door Opening While Driving (Recall 16V643), DPS6 Transmission Control Module (TCM) Internal Electronic Failure - Sudden No-Shift / Loss of Motive Power. Of these, 5 are rated critical and should be addressed promptly.

    Is the Ford Focus reliable?

    The 2015 Ford Focus has 13 known issues documented across 24,886+ owner reports. 5 issues are rated critical: DPS6 PowerShift Dual-Clutch Transmission Shudder, Hesitation, and Failure and Side Door Latch Failure - Door Opening While Driving (Recall 16V643) and DPS6 Transmission Control Module (TCM) Internal Electronic Failure - Sudden No-Shift / Loss of Motive Power and Focus Electric High-Voltage Battery Contactor Failure - Vehicle Will Not Charge and Electric Power Assist Steering (EPAS) Rack/Motor-Sensor Failure - "Power Steering Assist Fault" Message. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

    How much does it cost to fix common Ford Focus problems?

    Repair costs for known Ford Focus issues range from $0 to $4,500, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, DPS6 PowerShift Dual-Clutch Transmission Shudder, Hesitation, and Failure, typically costs $0-$4,500 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

    What is the 2012-2018 Ford Focus DPS6 PowerShift Dual-Clutch Transmission Shudder, Hesitation, and Failure?

    The DPS6 PowerShift 6-speed dual-clutch automated transmission fitted to 2012-2018 Ford Focus (and 2011-2019 Fiesta) is widely considered one of the worst transmission designs in modern automotive history. The dry dual-clutch design was fundamentally unsuited for stop-and-go driv… Repairs typically run $0-$4,500. Severity: high.

    What is the 2012-2015 Ford Focus Side Door Latch Failure - Door Opening While Driving (Recall 16V643)?

    The 2012-2015 Ford Focus is included in Ford's massive door latch recall (16V643 / 14S17) covering 2.38 million vehicles. The pawl spring tab inside the side door latches can fracture, particularly in hot and humid climates. A fractured pawl spring tab causes the door to fail to… Repairs typically run $0-$0. Severity: high.

    What is the 2012-2016 Ford Focus DPS6 Transmission Control Module (TCM) Internal Electronic Failure - Sudden No-Shift / Loss of Motive Power?

    Separate from the clutch shudder that made the PowerShift famous, the DPS6's mechatronic Transmission Control Module - the electronic unit that drives the two shift actuators inside the case - suffers its own solder-joint and internal circuit failures. Failure is usually abrupt r… Repairs typically run $0-$1,400. Severity: high.

    What is the 2012-2018 Ford Focus Focus Electric High-Voltage Battery Contactor Failure - Vehicle Will Not Charge?

    On the battery-electric Focus, the high-voltage pack's main positive and negative contactors (relays) fail - either welding stuck closed or burning their contacts open. When a contactor faults, the on-board charger cannot close the HV circuit, so the car reports a charging fault,… Repairs typically run $600-$3,000. Severity: high.

    What is the 2012-2016 Ford Focus Electric Power Assist Steering (EPAS) Rack/Motor-Sensor Failure - "Power Steering Assist Fault" Message?

    The 2012 Mk3 Focus was the first Focus with a fully electric rack-mounted power steering assist (EPAS). The torque/position sensor and motor assembly inside the rack, and the power steering control module (PSCM) integrated with it, fail intermittently - often heat-soaked on long… Repairs typically run $900-$2,500. Severity: high.

    What is the 2012-2018 Ford Focus 2.0L Direct Injection Carbon Buildup on Intake Valves?

    The 2.0L GDI (Gasoline Direct Injection) and 2.0L EcoBoost engines in 2012-2018 Ford Focus accumulate carbon deposits on the intake valves over time because direct injection fuel never washes over the valve faces. Oil vapors from the PCV system coat the intake valves and harden i… Repairs typically run $400-$900. Severity: medium.

    What is the 2012-2018 Ford Focus Passenger-Side Hydraulic Engine Mount Collapse Causing Heavy Idle Vibration?

    The Mk3 Focus uses a three-mount layout: a fluid-filled hydraulic mount on the passenger side, a solid transmission mount on the driver side, and a rear torque strut ("dogbone"). The passenger-side hydraulic mount is the weak link - the rubber cracks, the damping fluid leaks out,… Repairs typically run $180-$450. Severity: medium.

    What is the 2012-2018 Ford Focus Front Timing Chain Cover / VCT Solenoid Seal Oil Leak on 2.0L Ti-VCT and EcoBoost?

    The Mk3 four-cylinders use an RTV-sealed aluminum front cover rather than a gasket. The RTV bead fails at the cover-to-block joint and around the variable cam timing (VCT) solenoid bores, letting oil weep down the front of the block onto the subframe and, on the ST, onto the turb… Repairs typically run $600-$1,600. Severity: medium.

    What is the 2012-2018 Ford Focus Windshield Washer Pump Leak Wicking Down the Harness and Corroding the Body Control Module?

    The washer reservoir and pump seal leaks, and washer fluid runs down the pump's wiring. Capillary action carries the fluid inside the wire insulation the full length of the harness to the BCM connector in the passenger footwell, where it corrodes the pins and the module itself. T… Repairs typically run $250-$1,200. Severity: medium.

    What is the 2012-2016 Ford Focus MyFord Touch / SYNC 2 APIM Module Failure - Black Screen, Reboot Loop, Loss of Backup Camera?

    The Accessory Protocol Interface Module (APIM) behind the center stack runs MyFord Touch / SYNC 2. Its internal flash memory and processor board fail, producing a permanently black screen, endless reboot cycles, freezing, or a system that boots but loses audio and the rear-view c… Repairs typically run $300-$1,200. Severity: medium.

    What is the 2013-2018 Ford Focus Focus ST Charge Pipe / Bypass Valve Boost Leak Causing Sudden Power Loss and Overboost Codes?

    On the 2.0L EcoBoost Focus ST the plastic charge pipe couplers between the turbo, front-mount intercooler, and throttle body are held by spring clamps and blow off or work loose under sustained boost, especially after any tune or intercooler change. The stock bypass/blow-off valv… Repairs typically run $60-$450. Severity: medium.

    What is the 2012-2018 Ford Focus Canister Purge Valve Failure Causing Rough Idle and Stalling?

    The 2012-2018 Ford Focus with the 2.0L GDI engine experiences frequent canister purge valve (CPV) failures that cause rough idle, stalling, difficulty starting (especially after refueling), and fuel-related DTCs. The purge valve sticks open, allowing fuel vapors to flood the inta… Repairs typically run $80-$250. Severity: low.

    What is the 2008-2018 Ford Focus Door Ajar Warning False Alarm and Interior Lights Staying On?

    The Focus door ajar switch integrated into the door latch assembly fails, causing the dash to display a door ajar warning when all doors are closed. This also keeps the interior dome lights on, which drains the battery overnight. The latch switch corrodes or wears out, sending a… Repairs typically run $30-$200. Severity: low.

    Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.

    Data sourced from 24,886+ owner reports, NHTSA recalls, TSBs, and automotive forums.