Au7o mascotAu7o
Known IssuesTest Hub demo
  1. Au7o
  2. /
  3. Known Issues
  4. /
  5. Toyota
  6. /
  7. Corolla
Toyota · Known Issues

2011 Toyota Corolla Problems: 9 Known Issues

2011 model year · NHTSA recalls, manufacturer TSBs, and owner forum reports · Updated September 2026

Share:@au7o.io

2011 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

Known IssuesMotorcycle IssuesDTC LookupDrivePricingAboutTermsPrivacyCookiesConsentData rightsCopyrightFeedback
Share:@au7o.io

Vehicle data and repair guidance on this site are compiled with AI assistance and may contain errors. Always verify with your service manual or a qualified mechanic.

Data protection representation

DataRep representative in the United KingdomDataRep representative in the European Union
Au7o · 2026
Built for DIY mechanics. Privacy-first.
Explore free Hub demo
No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example
Issue summary

According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2011 Toyota Corolla has 9 documented known issues, with 2 rated critical. The most serious are Water Pump Bearing/Seal Failure Causing Coolant Leak and Overheating ($180-$500 repair) and Rear Suspension Arm Thread Corrosion Leading to Arm Separation (Recall) ($0-$400 repair). Across all issues with published estimates, repair costs range from $25 to $1,200. DIY maintenance guides at au7o.io.

In This Article

  • Corolla Cooling1
  • Corolla Suspension1
  • Corolla Interior2
  • Corolla Electrical2
  • Corolla Safety/Recalls1
  • Corolla Engine1
  • Corolla HVAC1
  • Recalls7
  • FAQ
Get Started
Back to top

In This Article

  • Cooling1
  • Suspension1
  • Interior2
  • Electrical2
  • Safety/Recalls1

All 9 Known Issues

NHTSA Recalls7 recalls

STEERING:COLUMN

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Corolla, Corolla Cross, Corolla Cross Hybrid, Highlander, Highlander Hybrid, Tacoma, 2023 Lexus RX350, RX350 Hybrid, RX500 Hybrid, 2023-2024 Lexus NX250, NX350, and NX350 Hybrid vehicles. An electrical connection inside the steering column's spiral cable assembly may be insufficiently welded, causing the connection to separate and deactivate the driver's air bag. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

Campaign #23V48000012/07/2023

STEERING

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Corolla and Corolla Hybrid vehicles. Due to cracks developed during the manufacturing process, the steering intermediate shaft assembly may fracture and possibly result in the shaft detaching from the steering column.

Campaign #24V87800021/11/2024

STEERING:COLUMN

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Toyota Corolla, Corolla Cross, Corolla Cross Hybrid, Highlander, Highlander Hybrid, Tacoma, Lexus RX350, 2023-2024 NX250, and NX350 vehicles that may have been incorrectly repaired under previous NHTSA recall number 23V-480. An electrical connection inside the steering column's spiral cable assembly may be insufficiently welded, causing the connection to separate and deactivate the driver's air bag. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

🔧
A mechanic who knows YOUR exact car
Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
Get ahead of Toyota Corolla problems — free
Leave your email and we'll alert you the moment there's a new recall or known issue for your Toyota Corolla. Free, no account needed.

Don't see your problem? Describe your symptoms to get a diagnosis, or .

Other Toyota Models

Toyota RAV460Toyota Camry54Toyota Highlander51Toyota 4Runner47Toyota Tacoma46Toyota Sienna32

Frequently Asked Questions

What are the most common Toyota Corolla problems?

According to Au7o's research across NHTSA recalls, manufacturer TSBs, and owner forum reports, the 2011 Toyota Corolla has 9 documented issues. The most frequently reported are: Water Pump Bearing/Seal Failure Causing Coolant Leak and Overheating, Rear Suspension Arm Thread Corrosion Leading to Arm Separation (Recall), Melting/Sticky Dashboard Surface Causing Glare and Odor. Of these, 2 are rated critical and should be addressed promptly.

Is the Toyota Corolla reliable?

The 2011 Toyota Corolla has 9 known issues compiled from NHTSA recalls, manufacturer TSBs, and owner forum reports. 2 issues are rated critical: Water Pump Bearing/Seal Failure Causing Coolant Leak and Overheating and Rear Suspension Arm Thread Corrosion Leading to Arm Separation (Recall). Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

How much does it cost to fix common Toyota Corolla problems?

Repair costs for known Toyota Corolla issues range from $0 to $1,200, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, Water Pump Bearing/Seal Failure Causing Coolant Leak and Overheating, typically costs $180-$500 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

What is the 2009-2020 Toyota Corolla Water Pump Bearing/Seal Failure Causing Coolant Leak and Overheating?

The engine-driven water pump on 1.8L 2ZR-FE Corollas is a high-frequency failure item. The original early-production pressed-metal-body pump (later revised to an improved alloy-body design) develops a leaking shaft seal and/or a worn/noisy bearing, often beginning to fail surpris… Repairs typically run $180-$500. Severity: high.

What is the 2009-2013 Toyota Corolla Rear Suspension Arm Thread Corrosion Leading to Arm Separation (Recall)?

Toyota recalled certain 2009-2013 Corolla (and Matrix and other shared-platform) vehicles for a rear suspension arm (rear toe/tie-rod arm) defect. If the rear-wheel-alignment adjustment cam/lock nut was not tightened to the correct torque during alignment service, backlash develo… Repairs typically run $0-$400. Severity: high.

Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.

Data compiled from NHTSA recalls, manufacturer TSBs, automotive forums, and AI-assisted research. No aggregated owner-report counts available for this vehicle yet.

Engine
1
  • HVAC1
  • Recalls7
  • FAQ
  • Filter:
    ALL YEARS2026202520242023202220212020201920182017201620152014201320122011201020092008200720062005200420032002200120001999199819971996199519941993199219911990

    When Issues Typically Appear

    Headlight Bulb and Low-Beam Circuit Overheating/Melting
    30K-120K
    Driver and Passenger Sun Visor Breakage and Drooping
    30K-120K
    Airbag Warning Light from Spiral Cable (Clock Spring) Failure
    60K-150K
    038K75K113K150K mi

    On the 2009-2020 Toyota Corolla 1.8L 2ZR-FE I4, the engine-driven water pump on 1.8L 2ZR-FE Corollas is a high-frequency failure item. The original early-production pressed-metal-body pump (later revised to an improved alloy-body design) develops a leaking shaft seal and/or a worn/noisy bearing, often beginning to fail surprisingly early (owners report from ~10,000-40,000 miles and again later in life). Coolant weeps from the bottom weep hole and gets flung across the underside of the hood, leaving pinkish Toyota Super Long Life coolant residue. Toyota issued TSB SB-0362-09R1 (12/04/2009) covering coolant leaks and abnormal noise from the water pump on some 2009-2010 Corolla/Matrix. If ignored, the pump can fail catastrophically and cause engine overheating and permanent head/head-gasket damage.

    Common Symptoms

    • Pink or green coolant residue/spray on underside of hood and front of engine
    • Low coolant level / repeated topping up
    • Whining, grinding, or rattling noise from the front of the engine
    • Coolant dripping from the pump weep hole
    • Engine temperature gauge climbing / overheating
    • Sweet coolant smell after driving

    How to Fix

    Replace the water pump with the revised OEM design (Toyota assembly 16100-39466, which supersedes 16100-39465 and includes pulley and gasket) or a quality Aisin WPT-140 unit; verified aftermarket cross-refs include OAW T7480 and Aisin WPT-140. Replace the gasket and refill with Toyota SLLC (pink) coolant, then bleed the cooling system. Inspect the serpentine belt while access is open. Catch early signs (pink residue near the front-center/passenger side of the block or a faint whine) before overheating occurs. Typical mileage to first failure ranges widely; many owners do it preventively around 90,000-120,000 miles.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Toyota 16100-39466 genuine engine water-pump assembly

      confirmed leaking, noisy or mechanically failed water pump Fitment/availability: 2009-2019 Corolla catalog branch including 2ZR-FE/2ZR-FAE applications; use here only after confirming the exact engine, VIN, production origin/date and ins…

      ToyotaPartsDeal
    • Toyota 00272-SLLC2 genuine Super Long Life Coolant, 50/50 prediluted, 1 gallon

      coolant refill and bleed after repair, not a stop-leak product Fitment/availability: Toyota pink 50/50 prediluted SLLC specification; confirm the owner's/service manual requirement and calculate quantity from the exact drain/refill proce…

      PartLimit

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$180 - $500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Jun 2026

    On the 2009-2013 Toyota Corolla 1.8L 2ZR-FE I4, toyota recalled certain 2009-2013 Corolla (and Matrix and other shared-platform) vehicles for a rear suspension arm (rear toe/tie-rod arm) defect. If the rear-wheel-alignment adjustment cam/lock nut was not tightened to the correct torque during alignment service, backlash develops at the threaded portion of the arm; road salt and water then corrode the exposed threads. Continued use can damage the threads to the point that the arm separates from the body, causing sudden loss of vehicle control. This is a documented safety recall with the remedy launched in phases (Sept 2013 - Feb 2014) due to parts constraints, not just a forum complaint.

    Common Symptoms

    • Clunk or knock from the rear suspension over bumps
    • Rear-end vagueness or wandering at speed
    • Visible rust/corrosion on rear suspension arm threads/cam bolts
    • Uneven rear tire wear from shifted alignment
    • Open recall flag on VIN lookup

    How to Fix

    Have the dealer perform the recall remedy at no charge: inspect both rear suspension arms, replace any arm showing rust/corrosion on the alignment-adjustment threads, and encase all rear arms in epoxy to seal the threads from future moisture and salt intrusion. Verify open-recall status by VIN at toyota.com/recall or nhtsa.gov before buying or servicing one of these cars. Always torque rear alignment cam nuts to spec after any alignment.

    Typical repair cost:$0 - $400

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Jun 2026

    On the 2003-2013 Toyota Corolla, corollas of this era share Toyota's defective dashboard top-pad material that degrades under sustained heat and UV (especially in hot/sunny climates like Arizona, Florida, Texas, California). The dash surface becomes soft, sticky/tacky, shiny, and develops cracks, and can emit a chemical odor. The shiny surface reflects strong glare onto the windshield, a genuine driving-safety hazard, and owners worried about softening over the passenger airbag. Toyota did NOT issue a safety recall; instead it offered a Customer Support Program / 'enhanced warranty' (part of a 3.4-million-vehicle program) that replaced affected dashboards, but that coverage expired (primary coverage ended May 31, 2017), leaving later sufferers to pay out of pocket. The issue was the subject of class-action litigation.

    Common Symptoms

    • Sticky or tacky dashboard surface
    • Shiny dashboard causing windshield glare
    • Dashboard cracking or bubbling
    • Chemical or unpleasant odor from the dash
    • Soft/deformed area over the passenger airbag

    How to Fix

    If still under any extended/regional warranty coverage, request a free dashboard top-pad replacement at a Toyota dealer (most programs have now expired). Out-of-warranty fixes: full dashboard replacement (expensive), a molded dash cap/overlay bonded over the original, or a fitted dash cover/mat as a low-cost mitigation. Always check VIN-specific coverage at toyota.com/recall first. Park in shade or use a windshield sunshade to slow progression.

    Typical repair cost:$100 - $1,200

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Jun 2026

    On the 2009-2013 Toyota Corolla, a widespread nuisance issue on 2009-2013 Corollas is failure of the sun visor internal pivot, causing the visor to droop, swing down unexpectedly, or no longer stay in position. Owners frequently report the problem on both driver and passenger sides, and Toyota issued a warranty enhancement for certain vehicles. While not usually expensive, it can obstruct visibility and become a driver distraction.

    Common Symptoms

    • sun visor falls down while driving
    • visor will not stay up
    • loose visor pivot
    • visor blocks forward visibility
    • repeated visor failure on both sides

    How to Fix

    Inspection is straightforward: the visor will not hold tension or the pivot housing will feel loose or cracked. The fix is replacement of the affected visor assembly with the updated part; repair is simple and usually does not require more than basic hand tools.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Toyota 74320-12L50-B0 genuine left sun visor assembly, light gray

      failed driver-side visor that will not remain stowed Fitment/availability: 2009-2013 Toyota Corolla left/driver-side light-gray catalog branch; confirm color, sunroof equipment, build and VIN; supersedes listed earlier numbers Fitment/av…

      ToyotaPartsDeal
    • Toyota 74310-02G00-B0 genuine right sun visor assembly, light gray

      failed passenger-side visor that will not remain stowed Fitment/availability: 2009-2013 Toyota Corolla right/passenger-side light-gray catalog branch; confirm color, sunroof equipment, build and VIN; page identifies 74310-12L80-B0 as rep…

      ToyotaPartsDeal

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$80 - $250

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence

    On the 2009-2013 Toyota Corolla, owners of 10th-generation Corollas frequently report repeated low-beam headlight bulb failure, overheated connectors, and in some cases melted headlamp sockets or wiring. The problem is often linked to heat buildup at the bulb connector, poor terminal tension, or use of higher-output replacement bulbs. Complaints and forum threads show this is more than isolated bulb burnout, especially when one side repeatedly fails.

    Common Symptoms

    • repeated low-beam bulb burnout
    • one headlight out
    • melted bulb socket
    • burning smell near headlamp
    • intermittent headlight operation

    How to Fix

    Diagnosis should include checking charging voltage, inspecting the headlamp connector for discoloration or looseness, and verifying the correct bulb wattage is installed. Repair usually involves replacing the bulb and any heat-damaged socket or pigtail, then ensuring tight terminal contact. If the housing has been damaged by heat, the headlamp assembly may also need replacement.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Sylvania Basic 9006 standard halogen headlight bulb

      failed standard-output low-beam bulb after charging-voltage and connector inspection Fitment/availability: 9006/HB4 standard halogen, DOT-compliant bulb type for the 2009-2013 Corolla low-beam branch; confirm the installed lamp type befo…

      AutoZone
    • Dorman 84793 high-temperature 9006 headlight socket/pigtail

      melted, discolored or tension-damaged low-beam connector repair Fitment/availability: Two-wire high-temperature female socket for a 9006 bulb; splice-in repair only after confirming connector heat damage and matching terminals/polarity F…

      AutoZone

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Owner tips & cautions

    • TipAvoid extra-bright halogen bulbs with higher heat output; many owners report longer life with standard-output long-life bulbs.
    • TipIf a bulb fails repeatedly on the same side, inspect the connector immediately for heat damage instead of just installing another bulb.
    Typical repair cost:$25 - $350

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium Confidence

    On the 2003-2024 Toyota Corolla, power door lock actuator failure is one of the most widely reported Corolla annoyances across nearly every generation (well-documented 1998-2014 and continuing through 2015-2024 cars). The actuator is a small electric motor inside each door that drives the lock rod when you press the fob or door-panel switch. Over time the internal motor or plastic gears wear/strip, so a single door stops locking or unlocking electronically (or locks but won't unlock, or vice-versa), often accompanied by buzzing/grinding/clicking from inside the door. The problem is so widespread across the Toyota line it has drawn a proposed class action. There is no NHTSA safety recall for it.

    Common Symptoms

    • One door won't lock/unlock from fob or switch
    • Buzzing, grinding, or clicking from inside a door when locking
    • Lock works intermittently
    • Door locks but won't unlock (or reverse)
    • Lock motor runs but lock rod doesn't move

    How to Fix

    If only one door is affected, replace that door's lock actuator (a single-door electric motor assembly); the job requires removing the door panel and takes ~1-2 hours per door — a feasible DIY with basic tools. If all four doors fail together, suspect a shared electrical cause instead (door-lock relay, fuse, or wiring at the driver door boot). Confirm by operating each door individually from the fob and the master switch.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Toyota 69040-02440 genuine left-front door lock assembly with motor

      confirmed failed front-left latch/actuator assembly Fitment/availability: 2014-2024 Corolla catalog branch, front driver side; confirm VIN, body style, trim, production and connector because not every 2024 build uses the same right/left …

      ToyotaPartsDeal
    • Toyota 69030-02370 genuine right-front door lock assembly with motor

      confirmed failed front-right latch/actuator assembly Fitment/availability: 2014-2024 Corolla catalog branch, front passenger side; confirm VIN, body style, trim, production and connector; some 2024 builds catalog 69030-02380 instead Fitm…

      ToyotaPartsDeal

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$40 - $350

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Jun 2026

    On the 2009-2013 Toyota Corolla, a common problem on 10th-generation Corolla models is failure of the steering wheel spiral cable, also called the clock spring. When the ribbon circuit inside the cable breaks, the SRS warning light illuminates and steering-wheel-mounted functions such as the horn or audio switches may stop working. Toyota issued a warranty enhancement and many owners also documented the issue through NHTSA complaints and forum reports.

    This issue also affects: Lexus NX

    Common Symptoms

    • airbag warning light on
    • horn inoperative
    • steering wheel audio/cruise buttons stop working
    • intermittent SRS light
    • airbag system fault stored

    How to Fix

    Diagnosis usually starts by scanning the airbag system for driver-side squib or spiral cable communication faults, then checking whether the horn and steering wheel buttons also fail intermittently. Repair is replacement of the spiral cable assembly and clearing SRS codes; care is required because the airbag module must be removed and the replacement part must be centered correctly before installation.

    Typical repair cost:$350 - $900

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence

    On the 1998-2012 Toyota Corolla, chain-driven 1ZZ-FE (and early 2ZR-FE) Corollas commonly develop a brief rattle/chatter from the timing-chain area for the first few seconds after a cold start. The hydraulic chain tensioner relies on oil pressure to take up slack; with age, sludge/varnish buildup in the tensioner or a worn tensioner/guides lets the chain slap until oil pressure builds. It is a heavily discussed issue on owner forums (ToyotaNation, BobIsTheOilGuy, CorollaForum). Usually it's a benign-but-annoying noise, but a badly worn tensioner/guides can eventually let the chain wear the cover or, in severe cases, jump timing.

    This issue also affects: Lexus GS, Lexus LX

    Common Symptoms

    • Rattle/chatter from front of engine for a few seconds at cold start
    • Light top-end ticking that quiets once oil pressure builds
    • Chain noise that worsens with low or old oil
    • Rattle on quick throttle blips at idle

    How to Fix

    Maintain strict oil-change intervals with correct-viscosity oil (low oil level/pressure worsens the rattle). The community-recommended fix is to replace the hydraulic timing-chain tensioner first (it unbolts from the side of the timing cover near the firewall and is a relatively easy job); if noise persists, replace the chain and guides as a kit. Use OEM-quality parts — some aftermarket tensioners fit poorly. Cleaning sludge from a gummed-up tensioner can also resolve mild cases.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Toyota 13540-0D010 genuine 1ZZ-FE timing-chain tensioner assembly

      confirmed leaking, sticking or mechanically failed 1ZZ tensioner after noise and chain diagnosis Fitment/availability: 1998-2008 Corolla 1ZZ-FE branch with catalog engine-number note 5001001-9XXXXXX or CXXXXXX; page supersedes 13540-2202…

      ToyotaPartsDeal
    • Toyota 13540-0T020 genuine 2ZR timing-chain tensioner assembly

      confirmed failed 2ZR chain tensioner on the matching production branch Fitment/availability: 2009-2012 Corolla 2ZR-FE production branch marked (L); select by VIN, production origin and installed number and do not substitute for the cam-g…

      ToyotaPartsDeal
    • Toyota 13540-0H010 genuine chain-tensioner assembly

      confirmed failed tensioner on the matching alternative production branch Fitment/availability: 2009-2012 Corolla catalog alternative branch within this issue; confirm 2ZR-FE, VIN, production origin and installed number because the listin…

      ToyotaPartsDeal
    • Toyota 13050-0T050 genuine camshaft timing gear assembly

      bulletin-matching professional repair for brief cold-start knock/rattle; obtain all bulletin-specified gaskets and sealant separately by VIN Fitment/availability: 2009-2010 Corolla 2ZR-FE vehicles matching Toyota T-SB-0087-09 Rev1 after …

      Unit Auto Parts

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$80 - $900

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Jun 2026

    On the 2003-2019 Toyota Corolla, a very common and well-documented HVAC complaint: the heater/AC blower motor resistor (which controls the lower fan speeds) burns out, so the blower works only on the highest speed (often only speed 4) or stops working at certain settings. In some cases the resistor fails completely and the fan won't run at all. The resistor is mounted near the blower motor under the passenger side of the dash and overheats over time, frequently because a worn/dragging blower motor draws excessive current and cooks the resistor. Toyota's own diagnostics and multiple repair references list a failed resistor among the top causes of Corolla heater/AC fan problems.

    Common Symptoms

    • Blower only works on highest fan speed
    • No air on low/medium fan settings
    • Blower completely dead (no fan at any speed)
    • Intermittent fan operation
    • Burning-electrical smell from under the dash

    How to Fix

    Replace the blower motor resistor (a cheap, plug-in part located near the blower motor under the dash). Because a worn blower motor commonly causes the resistor to overheat and fail again, technicians recommend inspecting (and often replacing) the blower motor at the same time. Confirm the diagnosis by checking for ~12V at the blower connector across all speed settings; voltage only at high speed points to the resistor. Most owners can DIY in under an hour with basic tools.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Toyota 87138-02080 genuine blower-motor resistor

      confirmed lower-speed resistor failure on the early manual-A/C branch Fitment/availability: 2003-2008 Toyota Corolla CE, LE, S and XRS 1.8L with manual air conditioning; replaces 87138-02030 Fitment/availability: Ships in 1-2 business da…

      ToyotaPartsNow
    • Toyota 87138-02110 genuine blower-motor resistor

      confirmed lower-speed resistor failure on the later manual-A/C branch Fitment/availability: 2009-2019 Toyota Corolla 1.8L/2.4L manual-A/C branch; exact trim and HVAC equipment must be confirmed Fitment/availability: Add to Cart live when…

      ToyotaPartsNow

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$25 - $200

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerifiedReviewed Jun 2026
    Campaign #25V04000029/01/2025

    AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION

    Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2020-2021 Avalon, Avalon Hybrid, Corolla, Highlander, Highlander Hybrid, RAV4, RAV4 Hybrid, Lexus ES350, Lexus RX350, Lexus RX450H, 2021 Sienna Hybrid, Lexus ES250, 2020-2022 Camry, Camry Hybrid, and ES300H vehicles. A short circuit may develop in the Occupant Classification System (OCS) sensor, preventing the front passenger air bag from deploying.

    Campaign #23V86500020/12/2023

    FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

    Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 4Runner, 2019-2020 Avalon, 2019 Corolla Hatchback, 2017-2019 Highlander, 2018-2020 Camry, 2020 Corolla, 2018-2019 Land Cruiser, 2017-2020 Tacoma, 2019-2020 RAV4, 2019-2020 Sequoia, 2017-2020 Sienna, 2019-2020 Tundra, 2018-2020 Lexus ES350, 2017 Lexus GS200t, 2017-2019 Lexus GS350, 2019 Lexus GS300, 2018-2020 Lexus LC500h, 2019-2020 Lexus LS500, 2018-2019 Lexus GX460, 2017 Lexus IS200t, 2019 Lexus IS300, 2019 Lexus IS350, 2018-2020 Lexus LC500, 2018 Lexus LS500, 2019 Lexus LS500h, 2018-2019 Lexus LX570, 2017 Lexus RC200t, 2019 Lexus RC300, RC350, 2017 and 2019-2020 Lexus RX350, 2018-2020 RX350L, 2019 Lexus UX200, 2018-2019 Lexus NX300 vehicles. The low-pressure fuel pump inside the fuel tank may fail.

    Campaign #20V68200004/11/2020

    + 2 more recalls. Check all on NHTSA.gov

    Enter your VIN at NHTSA.gov to check recalls specific to your vehicle.

    get a full repair guide

    What is the 2003-2013 Toyota Corolla Melting/Sticky Dashboard Surface Causing Glare and Odor?

    Corollas of this era share Toyota's defective dashboard top-pad material that degrades under sustained heat and UV (especially in hot/sunny climates like Arizona, Florida, Texas, California). The dash surface becomes soft, sticky/tacky, shiny, and develops cracks, and can emit a… Repairs typically run $100-$1,200. Severity: medium.

    What is the 2009-2013 Toyota Corolla Airbag Warning Light from Spiral Cable (Clock Spring) Failure?

    A common problem on 10th-generation Corolla models is failure of the steering wheel spiral cable, also called the clock spring. When the ribbon circuit inside the cable breaks, the SRS warning light illuminates and steering-wheel-mounted functions such as the horn or audio switch… Repairs typically run $350-$900. Severity: medium.

    What is the 2009-2013 Toyota Corolla Headlight Bulb and Low-Beam Circuit Overheating/Melting?

    Owners of 10th-generation Corollas frequently report repeated low-beam headlight bulb failure, overheated connectors, and in some cases melted headlamp sockets or wiring. The problem is often linked to heat buildup at the bulb connector, poor terminal tension, or use of higher-ou… Repairs typically run $25-$350. Severity: medium.

    What is the 1998-2012 Toyota Corolla Timing Chain Tensioner Wear Causing Cold-Start Rattle (1ZZ-FE/2ZR-FE)?

    Chain-driven 1ZZ-FE (and early 2ZR-FE) Corollas commonly develop a brief rattle/chatter from the timing-chain area for the first few seconds after a cold start. The hydraulic chain tensioner relies on oil pressure to take up slack; with age, sludge/varnish buildup in the tensione… Repairs typically run $80-$900. Severity: medium.

    What is the 2009-2013 Toyota Corolla Driver and Passenger Sun Visor Breakage and Drooping?

    A widespread nuisance issue on 2009-2013 Corollas is failure of the sun visor internal pivot, causing the visor to droop, swing down unexpectedly, or no longer stay in position. Owners frequently report the problem on both driver and passenger sides, and Toyota issued a warranty… Repairs typically run $80-$250. Severity: low.

    What is the 2003-2019 Toyota Corolla Blower Motor Resistor Failure Causing Loss of Fan Speeds (HVAC Works Only on High)?

    A very common and well-documented HVAC complaint: the heater/AC blower motor resistor (which controls the lower fan speeds) burns out, so the blower works only on the highest speed (often only speed 4) or stops working at certain settings. In some cases the resistor fails complet… Repairs typically run $25-$200. Severity: low.

    What is the 2003-2024 Toyota Corolla Power Door Lock Actuator Failure (Single Door Won't Lock/Unlock)?

    Power door lock actuator failure is one of the most widely reported Corolla annoyances across nearly every generation (well-documented 1998-2014 and continuing through 2015-2024 cars). The actuator is a small electric motor inside each door that drives the lock rod when you press… Repairs typically run $40-$350. Severity: low.