Au7o mascotAu7o
Known IssuesTest Hub demo
  1. Au7o
  2. /
  3. Known Issues
  4. /
  5. Chrysler
  6. /
  7. 300
Chrysler · Known Issues

2015 Chrysler 300 Problems: 17 Known Issues

2015 model year · 22,470+ owner reports · Updated September 2026

Share:@au7o.io

2015 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

Known IssuesMotorcycle IssuesDTC LookupDrivePricingAboutTermsPrivacyCookiesConsentData rightsCopyrightFeedback
Share:@au7o.io

Vehicle data and repair guidance on this site are compiled with AI assistance and may contain errors. Always verify with your service manual or a qualified mechanic.

Data protection representation

DataRep representative in the United KingdomDataRep representative in the European Union
Au7o · 2026
Built for DIY mechanics. Privacy-first.
Explore free Hub demo
No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example
Issue summary

According to Au7o's analysis of 22,470+ owner reports, the 2015 Chrysler 300 has 17 documented known issues, with 8 rated critical. The most serious are TIPM Electrical Failures ($200-$1,200 repair), Fuel Pump Relay Failure (TIPM-Related) ($200-$1,200 repair), HEMI 5.7L MDS Lifter and Camshaft Failure ($2,000-$6,000 repair), Water Pump Failure and Cooling Leaks ($500-$900 repair), ABS Module Internal Failure ($300-$1,200 repair), Pentastar Cylinder Head Failure ($2,500-$4,500 repair), Starter Motor Failure ($300-$700 repair) and Chrysler 300 Cruise Control May Not Shut Off (Recall 18V332000). The most commonly reported issue is TIPM Electrical Failures with 3,200 owner reports. Across all issues with published estimates, repair costs range from $20 to $6,000. DIY maintenance guides at au7o.io.

In This Article

  • 300 Electrical5
  • 300 Engine4
  • 300 Fuel System2
  • 300 Cooling1
  • 300 Brakes1
  • 300 Transmission1
  • 300 Suspension1
  • 300 Drivetrain1
  • 300 Emissions1
  • Recalls6
  • FAQ
Get Started
Back to top

In This Article

  • Electrical5
  • Engine4
  • Fuel System2
Cooling
1
  • Brakes1
  • Transmission1
  • Suspension1
  • Drivetrain1
  • Emissions1
  • Recalls6
  • FAQ
  • All 17 Known Issues

    Filter:
    ALL YEARS2023202220212020201920182017201620152014201320122011201020092008200720062005

    When Issues Typically Appear

    Control Arm Bushing Premature Wear
    20K-40K
    Rear Differential Whine and Bearing Failure
    40K-60K
    ZF 8-Speed Transmission Harsh Shifting
    45K-150K
    038K75K113K150K mi
    Community reported
    3,200 owners

    On the 2011-2016 Chrysler 300, the TIPM main fuse and relay box circuit board traces blow from current spikes, shorts, or corrosion. Water intrusion common. Causes random electrical issues affecting fuel pump, lights, wipers, horn, windows, and safety systems.

    This issue also affects: Alfa Romeo Giulia, Alfa Romeo Stelvio

    Common Symptoms

    • Vehicle won't start but has power
    • Random activation of lights, wipers, or horn
    • ABS/airbag warning lights
    • Fuel pump running continuously
    • Intermittent starting issues

    How to Fix

    TIPM replacement or professional rebuild. Specialty companies offer rebuild services for $200-400 with warranty. OEM replacement from dealer $700-1,200 plus programming. Disconnect battery for 10 minutes to attempt temporary reset.

    Typical repair cost:$200 - $1,200

    Research This Issue

    Based on 3,200 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified3,200 owner reportsLast reported by owners May 2023Reviewed Feb 2026
    Community reported
    890 owners

    On the 2011-2023 Chrysler 300, starter motors fail prematurely or intermittently. Grinding noise during starting indicates worn starter gear. Electrical issues including corroded battery terminals, failed neutral safety switch, and bad starter relay contribute to no-start.

    Common Symptoms

    • Grinding noise when trying to start
    • Clicking sound but engine doesn't crank
    • No sound when turning key (silent)
    • Intermittent starting - works sometimes, fails others

    How to Fix

    Replace starter motor with updated unit. Before replacement, clean battery terminals and check battery voltage (12.4V+). Test neutral safety switch. Check starter relay and all wiring connections for corrosion.

    Typical repair cost:$300 - $700

    Research This Issue

    Based on 890 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerified890 owner reportsLast reported by owners Feb 2023Reviewed Feb 2026

    On the 2014-2018 Chrysler 300, the 2014-2018 Chrysler 300 is among the vehicles covered by FCA recall 18V332000. The recalled condition is a cruise control system that may not disengage. If a short circuit develops within the car's wiring while cruise control is engaged, the driver may be unable to cancel it — pressing the brake pedal does not stop it, and turning the system off manually does not stop it either. The 300 then maintains its set speed or possibly accelerates. NHTSA describes the resulting consequence as an increased risk of a crash. Because the 300 is a highway cruiser whose owners use cruise control often, the campaign's advice to stop using the system until the update is applied matters here.

    Common Symptoms

    • Cruise control does not cancel when the brake is applied
    • Cruise control cannot be manually switched off
    • Car continues at set speed or accelerates with cruise engaged

    How to Fix

    The recall repair is free at a Chrysler dealer, who inspects the software and performs a software flash on the engine or powertrain control module. The campaign began June 4, 2018; the FCA customer service line is 1-800-853-1403. Check your VIN at nhtsa.gov/recalls to confirm coverage and completion — an unperformed 2018 recall is common on a car this age. Until the flash is done, do not use cruise control. If the system will not disengage while driving, brake firmly and steadily, shift the transmission to neutral, and put the car in park once it has stopped.

    Find a Chrysler dealer

    Choose to share your location for this search, or enter an area below. Your search location is sent to Google to find dealers.

    Open Chrysler dealer map in Google Maps ↗

    Call to confirm they service Chrysler vehicles and check your VIN, recall eligibility, parts availability, and appointment options.

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2015 Chrysler 300, only the 2015 model year of the Chrysler 300 falls under this FCA US LLC recall. Affected 300 sedans were built with radios containing software vulnerabilities that can allow a third party to reach certain networked vehicle control systems. Per NHTSA, exploitation of the vulnerability may result in unauthorized remote modification and control of certain vehicle systems, which increases the risk of a crash. The recall spans 1,416,903 vehicles in total, a campaign-wide figure across the Chrysler, Dodge, Jeep and RAM models named in it — earlier 300s outside the 2015 model year are not part of this action.

    Common Symptoms

    • Unauthorized remote operation or modification of vehicle systems

    How to Fix

    Chrysler's remedy is a no-charge software update to the radio that eliminates the vulnerability. Owners were mailed a USB drive with the update, could download the same update to their own USB drive from driveuconnect.com/software-update, or could have a Chrysler dealer install it immediately for free. Chrysler also had the wireless service provider close the open cellular connection to the vehicle. If you own a 2015 Chrysler 300 — particularly one bought used — verify the recall was completed by entering the VIN at nhtsa.gov/recalls.

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026
    Community reported
    1,550 owners

    On the 2011-2023 Chrysler 300, power window regulators and motors fail frequently, particularly rear doors. Cable in regulator breaks or motor burns out. Window stuck in down or up position. Motor and regulator sold as assembly, cannot be separated.

    Common Symptoms

    • Window stuck and won't move
    • Slow window operation
    • Grinding or clicking noise operating window
    • Window falls down into door
    • Window operates only in one direction

    How to Fix

    Replace window motor and regulator assembly. TSB #08-011-07 REV. A addresses front window issues requiring door module replacement. Check fuse first. Verify window switches functioning before replacing regulator.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Window Motor
      Cross-ref42-6004

      Fitment confirmed against the ShowMeTheParts catalog for this vehicle's year and engine.

      Cardone

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$250 - $600

    Research This Issue

    Based on 1,550 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified1,550 owner reportsLast reported by owners Jun 2023Reviewed Feb 2026
    Community reported
    2,400 owners

    On the 2011-2023 Chrysler 300 5.7L HEMI V8, the 5.7L HEMI V8 suffers from MDS lifter design defect where needle bearings are undersized. Lifters can be starved of oil during idle, causing seizure and catastrophic camshaft wear leading to engine failure.

    This issue also affects: Alfa Romeo Stelvio

    Common Symptoms

    • Persistent ticking or tapping noise from engine
    • Ticking worsens between 80,000-100,000 miles
    • Check engine light with misfire codes
    • Rough idle or loss of power
    • Metal shavings in oil

    How to Fix

    Replace all lifters, camshaft, and rocker arms as assembly. Use only OEM or high-quality lifters. Some owners disable MDS system. Use only SAE 5W-20 oil and maintain strict 3,000-5,000 mile oil change intervals.

    Typical repair cost:$2,000 - $6,000

    Research This Issue

    Based on 2,400 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified2,400 owner reportsLast reported by owners Aug 2023Reviewed Feb 2026
    Community reported
    950 owners

    On the 2011-2016 Chrysler 300 3.6L V6, left cylinder head on early Pentastar engines suffers valve seat failure in cylinder #2. Valve seats overheat and drop out of aluminum head causing catastrophic misfires and potential engine damage. Design flaw later addressed.

    This issue also affects: Alfa Romeo Stelvio

    Common Symptoms

    • Persistent misfire on cylinder #2
    • Check engine light with P0302 code
    • Rough idle and loss of power
    • Ticking or rattling from left side of engine

    How to Fix

    Complete cylinder head replacement required (left/driver's side). Cannot be repaired - must replace entire head with updated design. Some cases require both heads preventatively. Full coolant flush and thermostat replacement recommended.

    Typical repair cost:$2,500 - $4,500

    Research This Issue

    Based on 950 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified950 owner reportsLast reported by owners Nov 2022Reviewed Feb 2026
    Community reported
    1,800 owners

    On the 2011-2023 Chrysler 300 3.6L V6, the plastic oil filter housing develops cracks and gasket failures due to heat cycling. Chrysler discontinued original plastic part but never issued recall despite widespread problem.

    Common Symptoms

    • Oil leaking from front of engine near oil filter
    • Coolant leaking from oil filter housing area
    • Low oil level warnings
    • Oil and coolant mixing in severe cases

    How to Fix

    Replace with Dorman aluminum aftermarket housing (recommended by mechanics). OEM replacement is still plastic and will fail again. Complete coolant and oil system flush recommended.

    Typical repair cost:$400 - $900

    Research This Issue

    Based on 1,800 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified1,800 owner reportsLast reported by owners Jun 2023Reviewed Feb 2026
    Community reported
    350 owners

    On the 2005-2023 Chrysler 300 5.7L HEMI V8, the 5.7L HEMI is notorious for exhaust manifold bolts breaking, especially on the passenger side. Thermal cycling causes bolts to become brittle and snap. Creates a ticking noise at cold startup that partially diminishes as engine warms but never fully goes away. Broken bolts can be extremely difficult to extract if snapped flush with the cylinder head.

    Common Symptoms

    • Ticking or exhaust leak noise at cold startup
    • Noise diminishes as engine warms but doesn't fully disappear
    • Visible exhaust soot around manifold flanges
    • Failed emissions inspection
    • Exhaust smell in engine bay

    How to Fix

    Extract broken bolts using ProMAXX drill template tool kit (PMXA200PROP) to safely extract without damaging cylinder head. Replace with upgraded Grade 8 double-ended studs and nuts instead of bolts. Apply anti-seize compound on new hardware. Consider Hooker Blackheart stainless replacement manifolds for a permanent upgrade on high-mileage vehicles.

    Typical repair cost:$400 - $1,500

    Research This Issue

    Based on 350 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence350 owner reportsLast reported by owners Nov 2025Reviewed Feb 2026
    Community reported
    2,400 owners

    On the 2011-2016 Chrysler 300, fuel pump relay inside TIPM fails, preventing fuel pump activation. Vehicle has full electrical power but won't start due to no fuel delivery. Related to broader TIPM issue, specifically affects ASD/Fuel Pump relay circuits.

    This issue also affects: Alfa Romeo Giulia, Alfa Romeo Stelvio

    Common Symptoms

    • No-start condition with full electrical power
    • No fuel pump priming sound when key turned on
    • Intermittent starting issues
    • Vehicle starts sometimes, fails other times
    • No fuel pressure at rail

    How to Fix

    TIPM replacement or professional rebuild focusing on fuel pump relay circuits. Temporary fix: tap on TIPM while starting (may restore connection). Long-term requires TIPM replacement ($700-1,200) or rebuild ($200-400).

    Typical repair cost:$200 - $1,200

    Research This Issue

    Based on 2,400 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified2,400 owner reportsLast reported by owners Apr 2023Reviewed Feb 2026
    Community reported
    2,800 owners

    On the 2011-2023 Chrysler 300, evaporative emission control system develops small leaks triggering P0456 code. Most commonly failed gas cap, chaffed EVAP purge pipe harness, or failed purge solenoid. Triggers check engine light and prevents emissions testing pass.

    Common Symptoms

    • Check engine light with P0456 code
    • "Gas cap" warning even with cap tight
    • Fuel smell near vehicle
    • Failed emissions test
    • No performance or drivability issues

    How to Fix

    Start with gas cap replacement ($20-40). If code returns, smoke test EVAP system to locate leak. Common fixes: replace purge solenoid, repair chaffed wiring harness, or replace cracked EVAP hoses.

    Typical repair cost:$20 - $500

    Research This Issue

    Based on 2,800 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified2,800 owner reportsLast reported by owners Sep 2023Reviewed Feb 2026
    Community reported
    1,650 owners

    On the 2011-2023 Chrysler 300, water pumps fail prematurely due to bearing and seal wear. Air pockets frequently form in cooling system after repairs. The 300 is difficult to properly bleed air from cooling system.

    Common Symptoms

    • Coolant leak from front of engine or below water pump
    • Engine overheating or running hot
    • Temperature gauge fluctuating
    • Whining or grinding noise from water pump

    How to Fix

    Water pump replacement with new gaskets. Replace thermostat simultaneously per TSB. Complete coolant flush and proper bleeding essential. Use purge valve in front of upper intake manifold.

    Typical repair cost:$500 - $900

    Research This Issue

    Based on 1,650 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified1,650 owner reportsLast reported by owners Jul 2023Reviewed Feb 2026
    Community reported
    1,300 owners

    On the 2011-2023 Chrysler 300, aBS control module suffers internal failures due to short circuits in main circuit board. Prevents proper ABS operation and stores fault codes. While regular braking functions, vehicle loses anti-lock capability, traction control, and stability control.

    Common Symptoms

    • ABS warning light constantly illuminated
    • BAS warning light
    • Traction control warning
    • U0121 code (lost communication with ABS)
    • No ABS function during hard braking

    How to Fix

    ABS module replacement or professional rebuild service. Check all wheel speed sensors and wiring before replacement. Many specialty shops offer rebuild for $300-500 with warranty. OEM module requires programming to VIN.

    Typical repair cost:$300 - $1,200

    Research This Issue

    Based on 1,300 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified1,300 owner reportsLast reported by owners Dec 2022Reviewed Feb 2026
    Community reported
    1,400 owners

    On the 2012-2023 Chrysler 300, the ZF 8-speed automatic develops harsh shifting, especially in 2nd gear. Valve body is primary failure point. Cold shifting particularly problematic. Chrysler states "sealed for life" but failures occur before 150,000 miles.

    Common Symptoms

    • Harsh downshift from 2nd to 1st with jerking
    • Rough upshift from 2nd to 3rd with RPM spike
    • Noticeable clunk when shifting, especially cold
    • Delayed shifts or hesitation

    How to Fix

    Dealer must replace transmission valve body under warranty if applicable. Ensure TCM updated to latest software. Perform Quicklearn procedure after work. Use only ZF-approved fluid.

    Typical repair cost:$800 - $2,500

    Research This Issue

    Based on 1,400 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified1,400 owner reportsLast reported by owners Apr 2023Reviewed Feb 2026
    Community reported
    1,100 owners

    On the 2011-2023 Chrysler 300, oEM control arm bushings fail prematurely around 20,000-40,000 miles instead of typical 100,000+ lifespan. Bushings press-fitted into arms and cannot be replaced separately on most applications, requiring full control arm replacement.

    Common Symptoms

    • Clunking or rattling over bumps at low speeds
    • Squeaking when going over bumps
    • Uneven tire wear
    • Wandering or loose steering feel
    • Visible cracking or separation of bushing

    How to Fix

    Replace lower/upper control arms as complete assemblies. Aftermarket polyurethane bushings (Prothane, Energy Suspension) offer longer life but harsher ride. Alignment required after replacement.

    Typical repair cost:$280 - $800

    Research This Issue

    Based on 1,100 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerified1,100 owner reportsLast reported by owners Mar 2023Reviewed Feb 2026
    Community reported
    680 owners

    On the 2011-2023 Chrysler 300, rear differential develops whining from failed pinion bearing or ring/pinion wear. LX platform differentials have inherent whine, but excessive noise indicates bearing failure. Front differentials on AWD fail at 40,000-60,000 miles.

    Common Symptoms

    • Whining noise from rear during acceleration
    • Humming or roaring that increases with speed
    • Clunking during low-speed turns
    • Vibration from rear axle area
    • Dark fluid with metal shavings

    How to Fix

    Differential rebuild or replacement for severe cases. Drain differential fluid and inspect for metal shavings. Change fluid every 30,000-40,000 miles. Use proper limited-slip fluid if equipped. Pinion bearing replacement if caught early.

    Typical repair cost:$600 - $2,500

    Research This Issue

    Based on 680 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium ConfidenceVerified680 owner reportsLast reported by owners Oct 2022Reviewed Feb 2026

    On the 2005-2023 Chrysler 300, the Chrysler 300 uses Chrysler's proprietary natural-vacuum leak detection hardware instead of a conventional pressure-based leak detection pump. On 2005-2006 cars this is the NVLD (Natural Vacuum Leak Detection) valve/solenoid; from 2007 onward it is the ESIM (Evaporative System Integrity Monitor), a small spring-and-diaphragm switch mounted on or next to the charcoal/vapor canister on the left underbody ahead of the fuel tank. Both work the same way: as the sealed EVAP system heats and cools, natural pressure/vacuum changes trip an internal switch the PCM reads to confirm the system is sealed. The diaphragm seal inside the NVLD/ESIM is a well-documented high-failure item — it stiffens, sticks, or loses its seal with age, so the PCM can no longer verify integrity and falsely reports a leak. The result is a check-engine light with P0456 (small leak, ~0.020 in.), P0455 (large leak), or P0457 (interpreted as loose/missing cap), even when the fuel system is actually sealed. Because the code wording points at the gas cap, this is very commonly misdiagnosed: owners and shops replace the cap (and often the purge valve and canister) repeatedly before discovering the NVLD/ESIM itself is the culprit. One 2012 300 SRT owner reported eight dealer visits — the ESIM and its seal replaced twice, plus a new filler neck, purge valve, and charcoal canister — before the leak code was resolved. The fault is an emissions/MIL issue only: it does not affect drivability or engine longevity, but it will fail an emissions/smog inspection and on some model years can disable remote start until cleared. A faint fuel-vapor smell is occasionally reported when an actual leak is present.

    Common Symptoms

    • Check engine light / MIL on with no drivability change
    • Stored EVAP leak codes P0455, P0456, and/or P0457
    • Dashboard or message-center warning that the gas cap is loose/off even when it is tight
    • Repeat check-engine light after replacing the gas cap
    • Failed state emissions / smog inspection
    • Remote start disabled until the code is cleared (some model years)
    • Occasional faint fuel-vapor smell near the tank/filler when an actual leak is present

    How to Fix

    Always start with the cheapest checks: tighten the fuel cap fully (listen for clicks), inspect the cap's O-ring seal, and replace a cracked/old cap with a genuine Mopar cap, then clear the code and drive several drive cycles. If the code returns, have a shop perform an EVAP smoke test — but note the small-leak verification monitor can fail even when a smoke test passes (some hairline EVAP-line cracks only open under vacuum, sealing under the positive pressure of a smoke machine). Inspect the EVAP lines and the purge valve/solenoid for cracks. If the cap, lines, and purge valve are good, replace the NVLD valve (2005-2006) or the ESIM (2007+); the ESIM is the common Mopar service part (e.g., P/N 4861959AD), typically about $40-$60 OEM ($20-$50 aftermarket), and unbolts from the canister with a few hand tools — a DIY-friendly job. On early cars where the NVLD/ESIM is integrated and sold only with the charcoal canister assembly, expect a higher parts cost. After replacement, clear the codes and complete the EVAP drive-cycle/monitor before re-testing for emissions. Total at a shop generally runs from roughly $150 (ESIM swap with labor) up to the $417-$476 range if a full vapor/charcoal canister assembly is needed.

    Typical repair cost:$40 - $476

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Jun 2026
    NHTSA Recalls6 recalls

    VISIBILITY:WINDSHIELD

    Chrysler (FCA US, LLC) is recalling certain 2020-2021 Dodge Challenger, Dodge Charger, and Chrysler 300 vehicles. During manufacturing, the windshield may not have been properly bonded to the vehicle, allowing it to detach in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."

    Campaign #21V51600008/07/2021

    AIR BAGS:SIDE/WINDOW:CURTAIN:INFLATOR

    Chrysler (FCA US, LLC) (Stellantis) is recalling certain 2018-2021 Dodge Charger and Chrysler 300 vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.

    Campaign #24V19800014/03/2024

    PARKING BRAKE

    Chrysler (FCA US, LLC) is recalling certain 2023 Chrysler 300, Dodge Charger, and Dodge Challenger vehicles. The parking brake may be improperly adjusted, which can result in a vehicle roll away. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."

    Campaign #24V11200015/02/2024

    TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

    Chrysler (FCA US LLC) is recalling certain 2022 Dodge Challenger, Dodge Charger, and Chrysler 300 vehicles. The Tire Pressure Monitoring System (TPMS) sensor battery may fail prematurely and cause the sensor to become inoperative. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 138, "Tire Pressure Monitoring Systems."

    Campaign #22V50400014/07/2022

    TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

    Chrysler (FCA US LLC) is recalling certain 2022 Dodge Challenger, Dodge Charger, and Chrysler 300 vehicles. The Tire Pressure Monitoring System (TPMS) sensor battery may fail prematurely and cause the sensor to become inoperative. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 138, "Tire Pressure Monitoring Systems."

    Campaign #22V80800027/10/2022

    + 1 more recalls. Check all on NHTSA.gov

    Enter your VIN at NHTSA.gov to check recalls specific to your vehicle.

    🔧
    A mechanic who knows YOUR exact car
    Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
    Get ahead of Chrysler 300 problems — free
    Leave your email and we'll alert you the moment there's a new recall or known issue for your Chrysler 300. Free, no account needed.

    Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.

    Other Chrysler Models

    Chrysler Pacifica23Chrysler Voyager20Chrysler Town & Country18Chrysler LeBaron17Chrysler 20016Chrysler Prowler14

    Frequently Asked Questions

    What are the most common Chrysler 300 problems?

    According to Au7o's analysis of 22,470+ owner reports, the 2015 Chrysler 300 has 17 documented issues. The most frequently reported are: TIPM Electrical Failures, Fuel Pump Relay Failure (TIPM-Related), HEMI 5.7L MDS Lifter and Camshaft Failure. Of these, 8 are rated critical and should be addressed promptly.

    Is the Chrysler 300 reliable?

    The 2015 Chrysler 300 has 17 known issues documented across 22,470+ owner reports. 8 issues are rated critical: TIPM Electrical Failures and Fuel Pump Relay Failure (TIPM-Related) and HEMI 5.7L MDS Lifter and Camshaft Failure and Water Pump Failure and Cooling Leaks and ABS Module Internal Failure and Pentastar Cylinder Head Failure and Starter Motor Failure and Chrysler 300 Cruise Control May Not Shut Off (Recall 18V332000). Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

    How much does it cost to fix common Chrysler 300 problems?

    Repair costs for known Chrysler 300 issues range from $20 to $6,000, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, TIPM Electrical Failures, typically costs $200-$1,200 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

    What is the 2011-2016 Chrysler 300 TIPM Electrical Failures?

    The TIPM main fuse and relay box circuit board traces blow from current spikes, shorts, or corrosion. Water intrusion common. Causes random electrical issues affecting fuel pump, lights, wipers, horn, windows, and safety systems. Repairs typically run $200-$1,200. Severity: high.

    What is the 2011-2016 Chrysler 300 Fuel Pump Relay Failure (TIPM-Related)?

    Fuel pump relay inside TIPM fails, preventing fuel pump activation. Vehicle has full electrical power but won't start due to no fuel delivery. Related to broader TIPM issue, specifically affects ASD/Fuel Pump relay circuits. Repairs typically run $200-$1,200. Severity: high.

    What is the 2011-2023 Chrysler 300 HEMI 5.7L MDS Lifter and Camshaft Failure?

    The 5.7L HEMI V8 suffers from MDS lifter design defect where needle bearings are undersized. Lifters can be starved of oil during idle, causing seizure and catastrophic camshaft wear leading to engine failure. Repairs typically run $2,000-$6,000. Severity: high.

    What is the 2011-2023 Chrysler 300 Water Pump Failure and Cooling Leaks?

    Water pumps fail prematurely due to bearing and seal wear. Air pockets frequently form in cooling system after repairs. The 300 is difficult to properly bleed air from cooling system. Repairs typically run $500-$900. Severity: high.

    What is the 2011-2023 Chrysler 300 ABS Module Internal Failure?

    ABS control module suffers internal failures due to short circuits in main circuit board. Prevents proper ABS operation and stores fault codes. While regular braking functions, vehicle loses anti-lock capability, traction control, and stability control. Repairs typically run $300-$1,200. Severity: high.

    What is the 2011-2016 Chrysler 300 Pentastar Cylinder Head Failure?

    Left cylinder head on early Pentastar engines suffers valve seat failure in cylinder #2. Valve seats overheat and drop out of aluminum head causing catastrophic misfires and potential engine damage. Design flaw later addressed. Repairs typically run $2,500-$4,500. Severity: high.

    What is the 2011-2023 Chrysler 300 Starter Motor Failure?

    Starter motors fail prematurely or intermittently. Grinding noise during starting indicates worn starter gear. Electrical issues including corroded battery terminals, failed neutral safety switch, and bad starter relay contribute to no-start. Repairs typically run $300-$700. Severity: high.

    What is the 2014-2018 Chrysler 300 Chrysler 300 Cruise Control May Not Shut Off (Recall 18V332000)?

    The 2014-2018 Chrysler 300 is among the vehicles covered by FCA recall 18V332000. The recalled condition is a cruise control system that may not disengage. If a short circuit develops within the car's wiring while cruise control is engaged, the driver may be unable to cancel it —… Severity: high.

    What is the 2011-2023 Chrysler 300 Pentastar 3.6L Oil Filter Housing Leak?

    The plastic oil filter housing develops cracks and gasket failures due to heat cycling. Chrysler discontinued original plastic part but never issued recall despite widespread problem. Repairs typically run $400-$900. Severity: medium.

    What is the 2012-2023 Chrysler 300 ZF 8-Speed Transmission Harsh Shifting?

    The ZF 8-speed automatic develops harsh shifting, especially in 2nd gear. Valve body is primary failure point. Cold shifting particularly problematic. Chrysler states "sealed for life" but failures occur before 150,000 miles. Repairs typically run $800-$2,500. Severity: medium.

    What is the 2011-2023 Chrysler 300 Control Arm Bushing Premature Wear?

    OEM control arm bushings fail prematurely around 20,000-40,000 miles instead of typical 100,000+ lifespan. Bushings press-fitted into arms and cannot be replaced separately on most applications, requiring full control arm replacement. Repairs typically run $280-$800. Severity: medium.

    What is the 2011-2023 Chrysler 300 Rear Differential Whine and Bearing Failure?

    Rear differential develops whining from failed pinion bearing or ring/pinion wear. LX platform differentials have inherent whine, but excessive noise indicates bearing failure. Front differentials on AWD fail at 40,000-60,000 miles. Repairs typically run $600-$2,500. Severity: medium.

    What is the 2005-2023 Chrysler 300 5.7L HEMI Exhaust Manifold Bolt Failure?

    The 5.7L HEMI is notorious for exhaust manifold bolts breaking, especially on the passenger side. Thermal cycling causes bolts to become brittle and snap. Creates a ticking noise at cold startup that partially diminishes as engine warms but never fully goes away. Broken bolts can… Repairs typically run $400-$1,500. Severity: medium.

    What is the 2015 Chrysler 300 2015 Chrysler 300 Radio Software Vulnerability — Third-Party Access to Vehicle Controls (15V461000)?

    Only the 2015 model year of the Chrysler 300 falls under this FCA US LLC recall. Affected 300 sedans were built with radios containing software vulnerabilities that can allow a third party to reach certain networked vehicle control systems. Per NHTSA, exploitation of the vulnerab… Severity: medium.

    What is the 2011-2023 Chrysler 300 EVAP System Small Leak (P0456)?

    Evaporative emission control system develops small leaks triggering P0456 code. Most commonly failed gas cap, chaffed EVAP purge pipe harness, or failed purge solenoid. Triggers check engine light and prevents emissions testing pass. Repairs typically run $20-$500. Severity: low.

    What is the 2011-2023 Chrysler 300 Window Regulator and Motor Failure?

    Power window regulators and motors fail frequently, particularly rear doors. Cable in regulator breaks or motor burns out. Window stuck in down or up position. Motor and regulator sold as assembly, cannot be separated. Repairs typically run $250-$600. Severity: low.

    What is the 2005-2023 Chrysler 300 EVAP Leak Detection (NVLD/ESIM) Failure Triggers P0455/P0456 — Often Misdiagnosed as a Bad Gas Cap?

    The Chrysler 300 uses Chrysler's proprietary natural-vacuum leak detection hardware instead of a conventional pressure-based leak detection pump. On 2005-2006 cars this is the NVLD (Natural Vacuum Leak Detection) valve/solenoid; from 2007 onward it is the ESIM (Evaporative System… Repairs typically run $40-$476. Severity: low.

    Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.

    Data sourced from 22,470+ owner reports, NHTSA recalls, TSBs, and automotive forums.