Au7o mascotAu7o
Known IssuesTest Hub demo
  1. Au7o
  2. /
  3. Known Issues
  4. /
  5. GMC
  6. /
  7. Sierra 1500
GMC · Known Issues

2017 GMC Sierra 1500 Problems: 15 Known Issues

2017 model year · 4,075+ owner reports · Updated September 2026

Share:@au7o.io

2017 · All trims · All engines

Choose the year and equipment for your written issues and visual request.

Known IssuesMotorcycle IssuesDTC LookupDrivePricingAboutTermsPrivacyCookiesConsentData rightsCopyrightFeedback
Share:@au7o.io

Vehicle data and repair guidance on this site are compiled with AI assistance and may contain errors. Always verify with your service manual or a qualified mechanic.

Data protection representation

DataRep representative in the United KingdomDataRep representative in the European Union
Au7o · 2026
Built for DIY mechanics. Privacy-first.
Explore free Hub demo
No email neededHow interest is saved

Interest applies to the selected vehicle and configuration; it is not a reservation. Voting stores a first-party identifier for up to 180 days to prevent repeat votes. No account or email is needed. Clearing cookies or using another device may count separately. Privacy

Visual coming soon

Your interest helps us choose what to build next.

Visual Known Issues · Coming soon

$4.99/month plus taxes at launch · No payment today

Preview the XT6 example
Issue summary

According to Au7o's analysis of 4,075+ owner reports, the 2017 GMC Sierra 1500 has 15 documented known issues, with 6 rated critical. The most serious are AFM/DFM Lifter Collapse and Failure ($4,000-$8,000 repair), 8-Speed/10-Speed Transmission Torque Converter Shudder ($150-$4,500 repair), Electronic Brake Control Module Failure ($150-$1,500 repair), NHTSA Recall 19V645000: Declining Vacuum Pump Output Reduces Power Brake Assist, P0016 — Crank/Cam Correlation Fault from Stretched Timing Chain on 5.3L AFM V8 ($150-$1,800 repair) and P0700 — Transmission Fault Flag from Failing 6L80/6L90 Internal TEHCM ($600-$2,500 repair). The most commonly reported issue is AFM/DFM Lifter Collapse and Failure with 1,250 owner reports. Across all issues with published estimates, repair costs range from $20 to $8,000. DIY maintenance guides at au7o.io.

In This Article

  • Sierra 1500 Engine4
  • Sierra 1500 Transmission2
  • Sierra 1500 Brakes2
  • Sierra 1500 Emissions4
  • Sierra 1500 Cooling2
  • Sierra 1500 Suspension1
  • Recalls22
  • FAQ
Get Started
Back to top

In This Article

  • Engine4
  • Transmission2
  • Brakes2
Emissions
4
  • Cooling2
  • Suspension1
  • Recalls22
  • FAQ
  • All 15 Known Issues

    Filter:
    ALL YEARS2026202520242023202220212020201920182017201620152014201320122011201020092008200720062005200420032002200120001999
    Community reported
    1,250 owners

    On the 2014-2023 GMC Sierra 1500, the Active Fuel Management (AFM) and Dynamic Fuel Management (DFM) systems use special hydraulic lifters that collapse to deactivate cylinders for fuel economy. These lifters are prone to premature failure due to poor physical design and inadequate oil flow. Failures can occur as early as 4-digit mileage on newer trucks or 50,000-100,000 miles on older models. When a lifter fails, it can cause catastrophic engine damage requiring complete engine teardown.

    This issue also affects: Buick LeSabre, Buick Park Avenue, Buick Cascada

    Common Symptoms

    • Engine misfires or rough idle
    • Check engine light with cylinder misfire codes
    • Ticking or knocking noise from engine
    • Reduced engine power
    • Metal shavings in oil
    • Engine vibration during cylinder deactivation

    How to Fix

    Replace all 16 lifters and associated components (camshaft inspection recommended). Install AFM/DFM delete kit to disable cylinder deactivation permanently. Use AFM/DFM disabler device to prevent system activation. Use high-quality synthetic oil and change at 5,000 mile intervals.

    Typical repair cost:$4,000 - $8,000

    Research This Issue

    Based on 1,250 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence1,250 owner reportsLast reported by owners Feb 2024Reviewed Feb 2026

    On the 2007-2021 GMC Sierra 1500, p0016 means the crankshaft and Bank 1 intake camshaft are out of sync beyond tolerance. On the 5.3L V8 Sierra 1500 this is a signature failure because of two engine-specific problems: (1) the timing chain stretches over time — accelerated by AFM lifter debris and extended oil-change intervals — retarding cam timing until correlation exceeds threshold; and (2) the cam actuator (VVT) solenoid or phaser sticks. The AFM V8s are also known for oil consumption, and low/dirty oil starves the phasers and clogs solenoid screens, which both triggers P0016 and worsens chain wear. This is more serious than the related P0011: a severely stretched chain can jump a tooth and cause piston-to-valve contact, so continued driving is risky.

    This issue also affects: Buick Cascada, Buick Enclave, Buick Encore

    Common Symptoms

    • Check engine light
    • Rough idle
    • Rattle from front of engine on cold start
    • Reduced power / poor fuel economy
    • Hard start or stalling in severe cases

    How to Fix

    Check oil level/condition first — low or sludged oil alone can set it. Use a scan tool to read cam-retard/phaser data. If the timing chain is stretched (confirmed by measuring cam retard or valve-cover inspection), replace the timing chain, guides, tensioner, and cam phaser/sprocket; if only the VVT solenoid is stuck, replace it. Address AFM oil consumption to prevent recurrence.

    What you need to diagnose it

    The repair instructions explicitly call for reading stored codes. Use a scanner that can read the named code families before choosing a repair.The recommended scanner supports these code families; confirm your exact year, model and module coverage before buying.

    • ANCEL AD310 Classic OBD-II Scanner

      Read & clear engine (P) codes

      $20–$40View

    As an Amazon Associate, we earn from qualifying purchases. Prices are approximate and may vary.

    Reading and clearing the code is DIY work. Module replacement or reprogramming is not — most modules are VIN-programmed, so a new one does nothing until a shop codes it to your car. Check for an open recall or service bulletin before buying anything.

    Typical repair cost:$150 - $1,800

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Jul 2026
    Community reported
    345 owners

    On the 2014-2023 GMC Sierra 1500, direct injection engines do not spray fuel over the intake valves like port injection systems, allowing carbon deposits from oil and blow-by gases via the PCV system to accumulate on intake valve backs and ports. Over time, this buildup restricts airflow causing performance and efficiency loss. The 5.3L and 6.2L engines with direct injection are susceptible to this issue typically after 60,000-100,000 miles.

    This issue also affects: Buick LeSabre, Buick Park Avenue, Buick Cascada

    Common Symptoms

    • Reduced fuel economy
    • Rough idle
    • Hesitation during acceleration
    • Engine misfires
    • Reduced power output
    • In severe cases, engine knock or pinging

    How to Fix

    Walnut shell blasting of intake valves (professional service). Chemical intake cleaning treatment. Install oil catch can to reduce PCV contamination. Manual intake manifold removal and valve cleaning.

    Typical repair cost:$400 - $800

    Research This Issue

    Based on 345 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium Confidence345 owner reportsLast reported by owners Feb 2024Reviewed Feb 2026

    On the 2007-2022 GMC Sierra 1500, p0011 means the Bank 1 intake camshaft is timed more advanced than the ECM commanded — the phaser is stuck/biased advanced. On the Sierra 1500 5.3L/6.2L, the dominant cause is a VVT (camshaft actuator) solenoid whose internal screen has clogged with oil sludge or AFM debris, jamming the plunger so oil pressure to the phaser can't be modulated. GM acknowledges sticking/binding solenoids in PIs such as PIP5130K and PIP5855. Low or incorrect-viscosity oil is a very common trigger, so oil condition is always checked first. Because AFM lifter wear sheds metal into the oil, that debris circulates and clogs the solenoid screens — tying P0011 directly to the trucks' oil-consumption reputation. Drivers report rough running, and in worse cases stalling when slowing to a stop.

    This issue also affects: Cadillac XT5, Chevrolet Avalanche, Chevrolet Equinox

    Common Symptoms

    • Check engine light
    • Rough idle / rough running
    • Stalling when slowing to a stop
    • Hard start
    • Reduced power and fuel economy

    How to Fix

    Check engine oil level, viscosity, and condition first; an oil/filter change with correct-spec oil sometimes clears it. A proven test is swapping the Bank 1 intake solenoid with another solenoid — if the code follows to P0014/P0021, the solenoid is bad. Replace the VVT/cam actuator solenoid (roughly $40-$90 part). If the phaser or timing chain is worn, the timing set must be replaced.

    Typical repair cost:$40 - $450

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Jul 2026
    Community reported
    890 owners

    On the 2015-2023 GMC Sierra 1500, the 8L90 8-speed and 10L80/10L90 10-speed automatic transmissions experience shuddering during light throttle acceleration, particularly at highway speeds between 35-60 mph. The issue is caused by the torque converter lock-up clutch slipping and chattering. Harsh shifts between gears, especially 1st to 2nd and 2nd to 1st, are also commonly reported.

    This issue also affects: Buick Encore GX, Buick Regal, Cadillac DeVille

    Common Symptoms

    • Vibration or shudder during light acceleration at 35-60 mph
    • Harsh or jerky shifts between gears
    • Transmission slipping sensation
    • Shudder when torque converter locks up
    • Intermittent transmission hesitation

    How to Fix

    Transmission fluid flush with updated Mobil 1 Synthetic LV ATF HP fluid (GM part number 19417577). Torque converter replacement. Transmission control module software update. Complete transmission replacement in severe cases.

    Typical repair cost:$150 - $4,500

    Research This Issue

    Based on 890 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence890 owner reportsLast reported by owners Feb 2024Reviewed Feb 2026

    On the 2007-2018 GMC Sierra 1500, p0700 itself is only a flag: the Transmission Control Module has stored one or more transmission faults and is requesting the MIL. On Sierra 1500s with the 6L80 (and 6L90 on heavier variants) 6-speed automatic, the notable design issue is that the TCM is integrated into the valve body as a TEHCM (transmission electro-hydraulic control module), bolted inside the pan and sitting in 180-250°F fluid. Repeated heat cycling degrades the module and its integrated pressure switches and solenoids. When the TEHCM or a shift/pressure-control solenoid begins to fail, it sets specific sub-codes (e.g., P2534, P0742, P0761) plus the umbrella P0700, and the truck can exhibit harsh or missed shifts, slipping, or limp mode. Critically, on the 6L80/6L90 the solenoids are over-molded into the non-serviceable TEHCM and generally can't be replaced individually.

    This issue also affects: Buick Encore GX, Buick Envision, Cadillac CT6

    Common Symptoms

    • Check engine light with transmission sub-codes
    • Harsh or delayed shifts
    • Slipping
    • Loss of gears / limp mode
    • Torque converter shudder

    How to Fix

    P0700 alone is not actionable — pull the transmission-specific sub-codes with a capable scanner to find the real fault. Check fluid level/condition first. Repairs commonly involve replacing the TEHCM/valve body assembly (solenoids are integrated and non-serviceable) and re-learning shift adaptives; the new TEHCM must be programmed to the VIN. Address any fluid overheating cause to prevent recurrence.

    Typical repair cost:$600 - $2,500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Jul 2026
    Community reported
    345 owners

    On the 2014-2023 GMC Sierra 1500, the electronic brake control module (EBCM) experiences failures causing ABS, traction control, and stability control systems to malfunction. Issues range from warning lights illuminating to complete system failures. The 2023 models have a specific recall for software that may fail to display a warning light when brake fluid loss occurs.

    This issue also affects: Chevrolet Avalanche, Chevrolet Blazer, Chevrolet Colorado

    Common Symptoms

    • ABS warning light illuminated
    • Traction control and stability control warning lights
    • Service Brake Assist message on dash
    • ABS system activates unexpectedly or not at all
    • Brake pedal feels different or spongy
    • Multiple warning lights illuminate simultaneously

    How to Fix

    EBCM software reprogramming at dealer. EBCM replacement. Wheel speed sensor replacement if sensor-related. Check and repair wiring connections.

    Typical repair cost:$150 - $1,500

    Research This Issue

    Based on 345 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium Confidence345 owner reportsLast reported by owners Feb 2024Reviewed Feb 2026

    On the 2014-2018 GMC Sierra 1500, gM recalled 2014-2018 GMC Sierra trucks under NHTSA campaign 19V645000 because the amount of vacuum created by the vacuum pump may decrease over time. The vacuum pump is what gives the Sierra's brake pedal its power assist, so as the vacuum level drops, brake assist decreases. A Sierra owner experiences this as a pedal that takes more effort to push and a truck that needs a longer distance to come to a stop, which NHTSA states increases the risk of a crash. This is a progressive condition rather than a sudden failure - the assist fades as pump output declines. The campaign covers 3,456,719 vehicles in total across all of the GM trucks and SUVs included in the recall; that figure is campaign-wide and is not a count of Sierras.

    This issue also affects: Cadillac Escalade, Chevrolet Equinox, Chevrolet Silverado 1500

    Common Symptoms

    • Increased effort required to push the brake pedal
    • Longer distance needed to stop the truck
    • Brake assist that weakens gradually over time

    How to Fix

    The remedy is free at any GMC dealer: the dealer reprograms the Electronic Brake Control Module (EBCM). No brake hardware replacement is part of the recall remedy. GM began notifying owners October 8, 2019, and GM's internal number for the campaign is N192268490. If you bought your Sierra used or never received a letter, enter your VIN at nhtsa.gov/recalls to see whether this recall is still open on your truck, then call GMC customer service at 1-800-462-8782 or your dealer to schedule the reprogramming.

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Aug 2026

    On the 2007-2018 GMC Sierra 1500, p0430 is the Bank 2 counterpart to P0420 and, on the Sierra 1500 V8, points to the driver-side (Bank 2) catalytic converter falling below efficiency threshold. The mechanism is identical to Bank 1: the rear O2 sensor voltage begins mirroring the front sensor, so the ECM concludes that bank's cat can no longer store/release oxygen. The specific pattern on these trucks is that the underlying killer is usually AFM-related oil consumption or a lazy/aged rear O2 sensor rather than a defective converter out of the box. Owners commonly report P0430 (or both P0420 and P0430) returning even after installing new aftermarket converters — a well-documented frustration on GM-Trucks and SilveradoSierra forums — because the root cause (oil burning, exhaust leak, or a slow O2 sensor) was never corrected.

    This issue also affects: Chevrolet Cruze, Chevrolet Equinox, Buick Encore GX

    Common Symptoms

    • Check engine light
    • Poor fuel economy
    • Sulfur smell from exhaust
    • Code returns after aftermarket cat replacement
    • Minimal drivability change early

    How to Fix

    Confirm with a smoke/leak check and O2 sensor live-data (rear sensor should be lazy/flat, not switching). Rule out driver-side manifold bolt leaks. Replace a lazy Bank 2 rear O2 sensor first if indicated. If the converter is confirmed inefficient, fit an OEM/CARB-compliant direct-fit unit and fix any oil consumption; expect aftermarket cats to re-trigger if the AFM oil burn persists.

    Typical repair cost:$400 - $1,500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Jul 2026

    On the 2007-2017 GMC Sierra 1500, on the 5.3L V8 Sierra 1500, P0420 sets when the downstream (post-cat) O2 sensor tracks the upstream sensor too closely, meaning the Bank 1 catalytic converter is no longer scrubbing exhaust efficiently. The distinctive part on these trucks: the converter frequently dies prematurely from an upstream cause rather than age. Active Fuel Management (AFM) V8s burn oil past the lifters/rings, and that oil ash slowly poisons the catalyst substrate. GM TSB #16-NA-111 also documents a lesser-known trigger: a poor air-filter-housing seal lets abrasive dirt bypass the filter, wearing the O2 sensors and clogging the cat from the inside. Broken exhaust manifold bolts (a chronic GM V8 issue) create leaks that mimic P0420. Aftermarket cats have a poor track record here and often re-trigger the code within months.

    This issue also affects: Chevrolet Cruze, Chevrolet Equinox, Chevrolet Silverado 1500

    Common Symptoms

    • Check engine light on
    • Reduced fuel economy
    • Rotten-egg/sulfur exhaust smell
    • Occasional lack of power
    • No obvious drivability change in early stages

    How to Fix

    Do not blindly replace the converter. First scan for exhaust leaks (check manifold bolts), inspect the air-filter housing per TSB 16-NA-111, and check upstream/downstream O2 sensor operation with live data. Address AFM oil consumption if present. If the converter is genuinely spent, install an OEM or high-quality direct-fit unit and complete the heat-cycle break-in before the monitor re-runs.

    Typical repair cost:$400 - $1,500

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Jul 2026

    On the 2007-2018 GMC Sierra 1500, p0442 on the Sierra 1500 is a small EVAP leak detected during the ECM's key-off/idle vacuum test. On these trucks the two most common real-world causes are a loose, worn, or cracked gas cap seal (the cheapest fix and always the first check) and — a documented GM issue (TSB 15-NA-019) — the fuel tank filler vent hose connector cracking, which allows vapor to escape and sets P0442 (and sometimes P0455). The vent hose fracture is addressed by replacing the vent hose assembly (part No. 22802073 on 2013-2015 models). The EVAP purge valve (engine bay) and vent solenoid (near the tank) can also weep. Drivers often notice a faint fuel odor and the CEL, with no drivability change.

    This issue also affects: Chevrolet Corvette, Chevrolet Express, Chevrolet Silverado 1500

    Common Symptoms

    • Check engine light
    • Faint fuel/gasoline odor
    • No drivability change
    • Occasional failed emissions test

    How to Fix

    Start with the gas cap — inspect the seal and tighten/replace with OEM. If the code persists, perform a smoke test to pinpoint the leak; inspect the fuel filler vent hose connector for cracks and replace the vent hose assembly if fractured. Replace the purge or vent solenoid if the smoke test isolates it there.

    Typical repair cost:$20 - $250

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Jul 2026

    On the 2007-2023 GMC Sierra 1500, p0455 indicates a large (gross) EVAP leak — the ECM cannot pull or hold vacuum in the evaporative system at all. On the Sierra 1500 the classic causes are a completely missing/unsealed gas cap, a stuck-open or failed EVAP vent solenoid (mounted under the truck near the fuel tank/spare tire, where it's exposed to road spray, dirt, and corrosion), and a cracked or disconnected vapor/vent hose. Because the vent solenoid sits at the canister under the bed, water intrusion and corrosion cause it to stick open, which the ECM reads as a wide-open system; a tell-tale symptom is the fuel nozzle repeatedly clicking off during refueling. The filler vent hose connector fracture noted in GM literature can also escalate to P0455. Symptom-wise the driver usually sees only the CEL, sometimes a fuel smell, and no performance loss.

    This issue also affects: Chevrolet Corvette, Chevrolet Express, Chevrolet Silverado 1500

    Common Symptoms

    • Check engine light
    • Fuel vapor smell
    • Missing or loose gas cap
    • Fuel nozzle clicks off repeatedly when refueling
    • Fails emissions test

    How to Fix

    Confirm the gas cap is present and sealing. Smoke-test the EVAP system to find the large leak. The most common repair on these trucks is replacing the under-body EVAP vent solenoid/valve at the canister; also inspect and replace cracked vapor lines and the fuel filler vent hose. Clear codes and run the EVAP monitor to confirm.

    Typical repair cost:$20 - $350

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Jul 2026
    Community reported
    567 owners

    On the 2014-2020 GMC Sierra 1500, the A/C compressor is prone to premature failure due to faulty welds, insufficient lubrication, or internal mechanical failure. When the compressor fails catastrophically, metal debris contaminates the entire A/C system requiring replacement of multiple components. The A/C clutch can also fail independently, preventing compressor engagement.

    Common Symptoms

    • A/C blows warm air
    • A/C works intermittently
    • Unusual noise when A/C is engaged
    • A/C clutch not engaging
    • Visible refrigerant leak
    • A/C cools then gradually warms up

    How to Fix

    Replace A/C compressor with revised GM part. Flush A/C system and replace expansion valve, receiver/dryer, and condenser if compressor failed catastrophically. Replace A/C clutch assembly. Repair refrigerant leaks and recharge system.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • A/C Compressor
      Cross-ref471-1021

      Fitment confirmed against the ShowMeTheParts catalog for this vehicle's year and engine.

      eBay

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$500 - $2,500

    Research This Issue

    Based on 567 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    Medium Confidence567 owner reportsLast reported by owners Feb 2024Reviewed Feb 2026

    On the 2007-2019 GMC Sierra 1500, on the Sierra 1500, P0128 means the coolant did not reach the expected regulating temperature within the time/airflow the ECM predicted — almost always a thermostat stuck open (or partly open) so the engine runs too cool. The GM thermostat on the 5.3L/6.2L is integrated into a plastic housing on the engine, and the common failure is the thermostat losing its ability to close, letting coolant circulate continuously. Drivers notice the temp gauge sitting low, weak or slow-to-warm cabin heat (especially in winter), and worse fuel economy because the ECM stays in open-loop enrichment longer. A stuck-open thermostat is by far the most frequent cause; a failed/biased coolant temperature sensor is the secondary suspect and should be verified with live data before parts are thrown at it.

    This issue also affects: Buick Encore GX, Cadillac Allante, Cadillac Catera

    Common Symptoms

    • Temp gauge reads low / below normal
    • Weak or slow cabin heat
    • Reduced fuel economy
    • Check engine light
    • Longer engine warm-up

    How to Fix

    Verify actual coolant temperature with a scan tool vs. the gauge to separate a bad ECT sensor from a bad thermostat. If the engine won't reach ~195-210°F, replace the thermostat (and housing/gasket, commonly sold as an assembly) with an OEM-spec unit and refill/bleed the cooling system. Replace the ECT sensor if data shows an implausible reading.

    What you need to fix it

    Only diagnosis- and fitment-reviewed repair parts are linked here.

    • Engine Coolant Thermostat
      Cross-refTHRGM-0002

      Fitment confirmed against the ShowMeTheParts catalog for this vehicle's year and engine.

      eBay

    As an Amazon Associate, we earn from qualifying purchases; other part links may also earn au7o a commission. Confirm fitment by VIN before buying.

    Typical repair cost:$200 - $850

    Research This Issue

    GoogleRedditYouTubeNHTSA
    Community Reported
    High ConfidenceVerifiedReviewed Jul 2026
    Community reported
    678 owners

    On the 2014-2018 GMC Sierra 1500, the upper intermediate steering shaft develops excessive wear causing a pronounced clunking noise when turning the steering wheel or going over bumps. The issue is caused by wear in the shaft's universal joints or the plastic bushing near the firewall. GM has redesigned the part multiple times but the problem persists.

    This issue also affects: Chevrolet Impala

    Common Symptoms

    • Clunking noise when turning steering wheel at low speeds
    • Clunk or rattle when going over bumps
    • Play or looseness felt in steering wheel
    • Creaking noise from steering column area

    How to Fix

    Replace upper intermediate steering shaft with redesigned part (GM part number 84105918 or later). Lubricate shaft U-joints (temporary fix). Replace plastic bushing near firewall. DIY hose clamp fix to tighten shaft above plastic bearing.

    Typical repair cost:$50 - $600

    Research This Issue

    Based on 678 owner reports

    GoogleRedditYouTubeNHTSA
    Community Reported
    High Confidence678 owner reportsLast reported by owners Feb 2024Reviewed Feb 2026
    NHTSA Recalls22 recalls

    SERVICE BRAKES, HYDRAULIC:BRAKE FLUID LOW WARNING: LAMP

    General Motors, LLC (GM) is recalling certain 2023 Chevrolet Silverado 1500, GMC Sierra 1500, 2023-2024 Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL, Cadillac Escalade, and Escalade ESV vehicles. The electronic brake control module software may fail to display a warning light when a loss of brake fluid occurs. As such, these vehicles fail to comply with the requirements of Federal Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."

    Campaign #24V67400012/09/2024

    EXTERIOR LIGHTING:LIGHTING CONTROL MODULE:SOFTWARE

    General Motors, LLC (GM) is recalling certain 2020-2023 Cadillac CT4 and CT5; 2021-2023 Buick Envision; and 2022-2023 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles. The daytime running lights (DRLs) may not deactivate when the headlights are on. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."

    Campaign #22V90300008/12/2022

    ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL

    General Motors LLC (GM) is recalling certain 2021-2024 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, and Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles equipped with a 6.2L V8 gas engine. The connecting rod and/or crankshaft engine components may have manufacturing defects that can lead to engine damage and engine failure.

    Campaign #25V27400024/04/2025

    TIRES

    General Motors LLC (GM) is recalling certain 2020 Buick Enclave, Cadillac XT4, XT5, Escalade, Escalade ESV, Chevrolet Suburban, Tahoe, Traverse, GMC Yukon, Yukon XL, 2018-2021 Chevrolet Express, GMC Savana, 2019-2020 Chevrolet Blazer, Silverado 1500, GMC Acadia, Sierra 1500, and certain Continental tires sold to the aftermarket for various model year 2018-2021 vehicles. The affected tires were cured for too long during production.

    Campaign #21V11500025/02/2021

    ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES

    General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. The battery positive (B+) cable rings may have been manufactured with excessive glue, potentially causing an intermittent electrical connection between the B+ cable and alternator.

    Campaign #19V88800012/12/2019

    + 17 more recalls. Check all on NHTSA.gov

    Enter your VIN at NHTSA.gov to check recalls specific to your vehicle.

    🔧
    A mechanic who knows YOUR exact car
    Answers tuned to your year, make, model & trim — not generic advice. Save your garage so it always has the right context.
    Get ahead of GMC Sierra 1500 problems — free
    Leave your email and we'll alert you the moment there's a new recall or known issue for your GMC Sierra 1500. Free, no account needed.

    Don't see your problem? Describe your symptoms to get a diagnosis, or get a full repair guide.

    Other GMC Models

    GMC Terrain26GMC Yukon XL24GMC Sierra 3500HD24GMC Acadia22GMC Yukon21GMC Canyon18

    Frequently Asked Questions

    What are the most common GMC Sierra 1500 problems?

    According to Au7o's analysis of 4,075+ owner reports, the 2017 GMC Sierra 1500 has 15 documented issues. The most frequently reported are: AFM/DFM Lifter Collapse and Failure, 8-Speed/10-Speed Transmission Torque Converter Shudder, Electronic Brake Control Module Failure. Of these, 6 are rated critical and should be addressed promptly.

    Is the GMC Sierra 1500 reliable?

    The 2017 GMC Sierra 1500 has 15 known issues documented across 4,075+ owner reports. 6 issues are rated critical: AFM/DFM Lifter Collapse and Failure and 8-Speed/10-Speed Transmission Torque Converter Shudder and Electronic Brake Control Module Failure and NHTSA Recall 19V645000: Declining Vacuum Pump Output Reduces Power Brake Assist and P0016 — Crank/Cam Correlation Fault from Stretched Timing Chain on 5.3L AFM V8 and P0700 — Transmission Fault Flag from Failing 6L80/6L90 Internal TEHCM. Prospective buyers should inspect for these issues and factor potential repair costs into their purchase decision. Regular maintenance following the manufacturer's schedule helps prevent many common problems.

    How much does it cost to fix common GMC Sierra 1500 problems?

    Repair costs for known GMC Sierra 1500 issues range from $20 to $8,000, depending on the specific problem and whether you choose DIY or professional repair. The most critical issue, AFM/DFM Lifter Collapse and Failure, typically costs $4,000-$8,000 to repair. Au7o provides step-by-step DIY maintenance guides that can help reduce repair costs.

    What is the 2014-2023 GMC Sierra 1500 AFM/DFM Lifter Collapse and Failure?

    The Active Fuel Management (AFM) and Dynamic Fuel Management (DFM) systems use special hydraulic lifters that collapse to deactivate cylinders for fuel economy. These lifters are prone to premature failure due to poor physical design and inadequate oil flow. Failures can occur as… Repairs typically run $4,000-$8,000. Severity: high.

    What is the 2015-2023 GMC Sierra 1500 8-Speed/10-Speed Transmission Torque Converter Shudder?

    The 8L90 8-speed and 10L80/10L90 10-speed automatic transmissions experience shuddering during light throttle acceleration, particularly at highway speeds between 35-60 mph. The issue is caused by the torque converter lock-up clutch slipping and chattering. Harsh shifts between g… Repairs typically run $150-$4,500. Severity: high.

    What is the 2014-2023 GMC Sierra 1500 Electronic Brake Control Module Failure?

    The electronic brake control module (EBCM) experiences failures causing ABS, traction control, and stability control systems to malfunction. Issues range from warning lights illuminating to complete system failures. The 2023 models have a specific recall for software that may fai… Repairs typically run $150-$1,500. Severity: high.

    What is the 2014-2018 GMC Sierra 1500 NHTSA Recall 19V645000: Declining Vacuum Pump Output Reduces Power Brake Assist?

    GM recalled 2014-2018 GMC Sierra trucks under NHTSA campaign 19V645000 because the amount of vacuum created by the vacuum pump may decrease over time. The vacuum pump is what gives the Sierra's brake pedal its power assist, so as the vacuum level drops, brake assist decreases. A… Severity: high.

    What is the 2007-2021 GMC Sierra 1500 P0016 — Crank/Cam Correlation Fault from Stretched Timing Chain on 5.3L AFM V8?

    P0016 means the crankshaft and Bank 1 intake camshaft are out of sync beyond tolerance. On the 5.3L V8 Sierra 1500 this is a signature failure because of two engine-specific problems: (1) the timing chain stretches over time — accelerated by AFM lifter debris and extended oil-cha… Repairs typically run $150-$1,800. Severity: high.

    What is the 2007-2018 GMC Sierra 1500 P0700 — Transmission Fault Flag from Failing 6L80/6L90 Internal TEHCM?

    P0700 itself is only a flag: the Transmission Control Module has stored one or more transmission faults and is requesting the MIL. On Sierra 1500s with the 6L80 (and 6L90 on heavier variants) 6-speed automatic, the notable design issue is that the TCM is integrated into the valve… Repairs typically run $600-$2,500. Severity: high.

    What is the 2014-2018 GMC Sierra 1500 Intermediate Steering Shaft Clunk?

    The upper intermediate steering shaft develops excessive wear causing a pronounced clunking noise when turning the steering wheel or going over bumps. The issue is caused by wear in the shaft's universal joints or the plastic bushing near the firewall. GM has redesigned the part… Repairs typically run $50-$600. Severity: medium.

    What is the 2014-2020 GMC Sierra 1500 A/C Compressor and Clutch Failure?

    The A/C compressor is prone to premature failure due to faulty welds, insufficient lubrication, or internal mechanical failure. When the compressor fails catastrophically, metal debris contaminates the entire A/C system requiring replacement of multiple components. The A/C clutch… Repairs typically run $500-$2,500. Severity: medium.

    What is the 2014-2023 GMC Sierra 1500 Direct Injection Carbon Buildup on Intake Valves?

    Direct injection engines do not spray fuel over the intake valves like port injection systems, allowing carbon deposits from oil and blow-by gases via the PCV system to accumulate on intake valve backs and ports. Over time, this buildup restricts airflow causing performance and e… Repairs typically run $400-$800. Severity: medium.

    What is the 2007-2018 GMC Sierra 1500 P0430 — Catalyst Efficiency Bank 2 (Driver-Side) Converter Failure on 5.3L V8?

    P0430 is the Bank 2 counterpart to P0420 and, on the Sierra 1500 V8, points to the driver-side (Bank 2) catalytic converter falling below efficiency threshold. The mechanism is identical to Bank 1: the rear O2 sensor voltage begins mirroring the front sensor, so the ECM concludes… Repairs typically run $400-$1,500. Severity: medium.

    What is the 2007-2022 GMC Sierra 1500 P0011 — Intake Cam Over-Advanced from Sludge-Clogged VVT Solenoid on 5.3L V8?

    P0011 means the Bank 1 intake camshaft is timed more advanced than the ECM commanded — the phaser is stuck/biased advanced. On the Sierra 1500 5.3L/6.2L, the dominant cause is a VVT (camshaft actuator) solenoid whose internal screen has clogged with oil sludge or AFM debris, jamm… Repairs typically run $40-$450. Severity: medium.

    What is the 2007-2017 GMC Sierra 1500 P0420 — Catalyst Efficiency Bank 1 from Failing Cat, Often Caused by AFM Oil Consumption or Air-Box Debris?

    On the 5.3L V8 Sierra 1500, P0420 sets when the downstream (post-cat) O2 sensor tracks the upstream sensor too closely, meaning the Bank 1 catalytic converter is no longer scrubbing exhaust efficiently. The distinctive part on these trucks: the converter frequently dies premature… Repairs typically run $400-$1,500. Severity: medium.

    What is the 2007-2019 GMC Sierra 1500 P0128 — Engine Never Reaches Operating Temp from a Stuck-Open Thermostat?

    On the Sierra 1500, P0128 means the coolant did not reach the expected regulating temperature within the time/airflow the ECM predicted — almost always a thermostat stuck open (or partly open) so the engine runs too cool. The GM thermostat on the 5.3L/6.2L is integrated into a pl… Repairs typically run $200-$850. Severity: low.

    What is the 2007-2018 GMC Sierra 1500 P0442 — Small EVAP Leak from Loose/Cracked Gas Cap or Fractured Filler Vent Hose?

    P0442 on the Sierra 1500 is a small EVAP leak detected during the ECM's key-off/idle vacuum test. On these trucks the two most common real-world causes are a loose, worn, or cracked gas cap seal (the cheapest fix and always the first check) and — a documented GM issue (TSB 15-NA-… Repairs typically run $20-$250. Severity: low.

    What is the 2007-2023 GMC Sierra 1500 P0455 — Gross EVAP Leak from Failed Vent Solenoid, Missing Gas Cap, or Broken Vent Hose?

    P0455 indicates a large (gross) EVAP leak — the ECM cannot pull or hold vacuum in the evaporative system at all. On the Sierra 1500 the classic causes are a completely missing/unsealed gas cap, a stuck-open or failed EVAP vent solenoid (mounted under the truck near the fuel tank/… Repairs typically run $20-$350. Severity: low.

    Content on this page was compiled with AI assistance using NHTSA complaints, TSBs, owner reports, and public automotive data. While we strive for accuracy, this information may contain errors. Always verify repair procedures and specifications with your vehicle's service manual or a qualified mechanic.

    Data sourced from 4,075+ owner reports, NHTSA recalls, TSBs, and automotive forums.